Sharp LL-T1511A (serv.man25) User Manual / Operation Manual ▷ View online
26
9. Being careful not to damage the monitor, spread
out a soft cloth and lay the monitor on it display-
side down.
side down.
10.Remove the four screws and then remove the
stand from the monitor.
11.Attach the arm to the monitor with four screws.
12.Connect the AC adapter (purchased separately).
Connect the AC adapter's DC plug to the AC
adapter's connection terminal 9, and place the
cord inside the cord hook 0.
Coonect the power cord to the AC adapter q,
and connect the AC plug to the AC outlet w.
adapter's connection terminal 9, and place the
cord inside the cord hook 0.
Coonect the power cord to the AC adapter q,
and connect the AC plug to the AC outlet w.
9
0
q
w
Information
The stand is specially made for use with this
monitor. Once having removed the stand, never
attempt to attach it to another device.
Once having removed the screws, store them
together with the stand and if the stand is ever
re-attached be sure to use the original screws.
Using different screws could lead to malfunc-
tion.
The stand is specially made for use with this
monitor. Once having removed the stand, never
attempt to attach it to another device.
Once having removed the screws, store them
together with the stand and if the stand is ever
re-attached be sure to use the original screws.
Using different screws could lead to malfunc-
tion.
Information
The screws used to
attach the arm should be
M4 screws with a length
of 4 ~ 6 mm protruding
from the surface to be
attached. Using any
other kind of screw may
lead to the monitor
falling off or damage to
the internal part of the
monitor.
The screws used to
attach the arm should be
M4 screws with a length
of 4 ~ 6 mm protruding
from the surface to be
attached. Using any
other kind of screw may
lead to the monitor
falling off or damage to
the internal part of the
monitor.
AC adapter connection terminal
4 ~ 6 mm
Screw used to
attach arm
attach arm
Arm
Part of monitor
to which arm is
attached
to which arm is
attached
Instructions for installing a VESA compliant arm
LL-T1511-01A_gb.p65
2/14/01, 9:00 AM
26
26
9. Being careful not to damage the monitor, spread
out a soft cloth and lay the monitor on it display-
side down.
side down.
10.Remove the four screws and then remove the
stand from the monitor.
11.Attach the arm to the monitor with four screws.
12.Connect the AC adapter (purchased separately).
Connect the AC adapter's DC plug to the AC
adapter's connection terminal 9, and place the
cord inside the cord hook 0.
Coonect the power cord to the AC adapter q,
and connect the AC plug to the AC outlet w.
adapter's connection terminal 9, and place the
cord inside the cord hook 0.
Coonect the power cord to the AC adapter q,
and connect the AC plug to the AC outlet w.
9
0
q
w
Information
The stand is specially made for use with this
monitor. Once having removed the stand, never
attempt to attach it to another device.
Once having removed the screws, store them
together with the stand and if the stand is ever
re-attached be sure to use the original screws.
Using different screws could lead to malfunc-
tion.
The stand is specially made for use with this
monitor. Once having removed the stand, never
attempt to attach it to another device.
Once having removed the screws, store them
together with the stand and if the stand is ever
re-attached be sure to use the original screws.
Using different screws could lead to malfunc-
tion.
Information
The screws used to
attach the arm should be
M4 screws with a length
of 4 ~ 6 mm protruding
from the surface to be
attached. Using any
other kind of screw may
lead to the monitor
falling off or damage to
the internal part of the
monitor.
The screws used to
attach the arm should be
M4 screws with a length
of 4 ~ 6 mm protruding
from the surface to be
attached. Using any
other kind of screw may
lead to the monitor
falling off or damage to
the internal part of the
monitor.
AC adapter connection terminal
4 ~ 6 mm
Screw used to
attach arm
attach arm
Arm
Part of monitor
to which arm is
attached
to which arm is
attached
Instructions for installing a VESA compliant arm
LL-T1511-01A_gb.p65
2/14/01, 9:00 AM
26
26
9. Being careful not to damage the monitor, spread
out a soft cloth and lay the monitor on it display-
side down.
side down.
10.Remove the four screws and then remove the
stand from the monitor.
11.Attach the arm to the monitor with four screws.
12.Connect the AC adapter (purchased separately).
Connect the AC adapter's DC plug to the AC
adapter's connection terminal 9, and place the
cord inside the cord hook 0.
Coonect the power cord to the AC adapter q,
and connect the AC plug to the AC outlet w.
adapter's connection terminal 9, and place the
cord inside the cord hook 0.
Coonect the power cord to the AC adapter q,
and connect the AC plug to the AC outlet w.
9
0
q
w
Information
The stand is specially made for use with this
monitor. Once having removed the stand, never
attempt to attach it to another device.
Once having removed the screws, store them
together with the stand and if the stand is ever
re-attached be sure to use the original screws.
Using different screws could lead to malfunc-
tion.
The stand is specially made for use with this
monitor. Once having removed the stand, never
attempt to attach it to another device.
Once having removed the screws, store them
together with the stand and if the stand is ever
re-attached be sure to use the original screws.
Using different screws could lead to malfunc-
tion.
Information
The screws used to
attach the arm should be
M4 screws with a length
of 4 ~ 6 mm protruding
from the surface to be
attached. Using any
other kind of screw may
lead to the monitor
falling off or damage to
the internal part of the
monitor.
The screws used to
attach the arm should be
M4 screws with a length
of 4 ~ 6 mm protruding
from the surface to be
attached. Using any
other kind of screw may
lead to the monitor
falling off or damage to
the internal part of the
monitor.
AC adapter connection terminal
4 ~ 6 mm
Screw used to
attach arm
attach arm
Arm
Part of monitor
to which arm is
attached
to which arm is
attached
Instructions for installing a VESA compliant arm
LL-T1511-01A_gb.p65
2/14/01, 9:00 AM
26
26
9. Being careful not to damage the monitor, spread
out a soft cloth and lay the monitor on it display-
side down.
side down.
10.Remove the four screws and then remove the
stand from the monitor.
11.Attach the arm to the monitor with four screws.
12.Connect the AC adapter (purchased separately).
Connect the AC adapter's DC plug to the AC
adapter's connection terminal 9, and place the
cord inside the cord hook 0.
Coonect the power cord to the AC adapter q,
and connect the AC plug to the AC outlet w.
adapter's connection terminal 9, and place the
cord inside the cord hook 0.
Coonect the power cord to the AC adapter q,
and connect the AC plug to the AC outlet w.
9
0
q
w
Information
The stand is specially made for use with this
monitor. Once having removed the stand, never
attempt to attach it to another device.
Once having removed the screws, store them
together with the stand and if the stand is ever
re-attached be sure to use the original screws.
Using different screws could lead to malfunc-
tion.
The stand is specially made for use with this
monitor. Once having removed the stand, never
attempt to attach it to another device.
Once having removed the screws, store them
together with the stand and if the stand is ever
re-attached be sure to use the original screws.
Using different screws could lead to malfunc-
tion.
Information
The screws used to
attach the arm should be
M4 screws with a length
of 4 ~ 6 mm protruding
from the surface to be
attached. Using any
other kind of screw may
lead to the monitor
falling off or damage to
the internal part of the
monitor.
The screws used to
attach the arm should be
M4 screws with a length
of 4 ~ 6 mm protruding
from the surface to be
attached. Using any
other kind of screw may
lead to the monitor
falling off or damage to
the internal part of the
monitor.
AC adapter connection terminal
4 ~ 6 mm
Screw used to
attach arm
attach arm
Arm
Part of monitor
to which arm is
attached
to which arm is
attached
Instructions for installing a VESA compliant arm
LL-T1511-01A_gb.p65
2/14/01, 9:00 AM
26
