DOWNLOAD Sharp LL-H1813 (serv.man6) Service Manual ↓ Size: 580.98 KB | Pages: 32 in PDF or view online for FREE

Please attach and use metal fittings for the back-
side of the monitor.

The screw which attach metal fittings must use the
screw of 8mm in length.

8 mm

- When connecting, ensure that both the monitor

and computer are switched off.

- Be careful not to overly bend the cable or add

extension cords as this could lead to a
malfunction.

Connect the analog signal cable (sold separately-
model name: NL-C02E) to the DVI-I input terminal
of the monitor and analog RGB output terminal of
the computer.

- Paying attention to connector direction, firmly

insert the signal cable to terminal, and then
tighten the screws at both sides.

If connecting to a D-sub 15 pin 2 row Apple Power
Macintosh, attach a Macintosh conversion adapter
(commercially available) to the analog signal cable.

Connect the accessory digital signal cable or the
digital signal cable (sold separately-model name:
NL-C01E) to the DVI-I input terminal of the monitor
and digital RGB output terminal of the computer.
- For a digital signal input, it can be connected to a

computer with a DVI-compatible output terminal
(DVI-D24 pin or DVI-I29 pin) and which has
SXGA output ability. (Depending on the computer
to be connected, correct display may or may not
be possible.)

- Paying attention to connector direction, firmly

insert the signal cable to terminal, and then
tighten the screws at both sides.

Set the monitor as follows when establishing a
digital connection with a Power Mac using an ADC-
DVI adapter made by Belkin. (Operation has been
checked with the Power Mac G4 M7627J/A)
- Perform settings with the Power Mac power

supply off.

1.After connecting the power cord, turn on the

monitor’s main power.

2.Press the   button and   button simultaneously,

and while doing this press the POWER button
(i.e. turn the power on).

3.Set the input terminal to which the Belkin ADC-

DVI adapter is connected to ON.
Use the SELECT button to select [INPUT1] or

[INPUT2], and use the     buttons to select
[ON] and [OFF].
- Do not set to [ON] if you are not using a Belkin

ADC-DVI adapter, as this may result in
incorrect display.

Analog signal cable

Macintosh conversion adapter

Analog RGB output
terminal

Digital signal cable

Digital RGB output
terminal

Input terminal 1 and 2
( You can connect to
either side )

Input terminal 1 and 2
( You can connect to
either side )

4.Press the MENU button.

This completes setting.

- If you plan to use a commercially available

cable, obtain one with no resistance.

Headphones (commercially available) can be
connected.

This monitor is equipped with a USB standard
(Rev. 1.1) self-powered hub.
Downstream (2 ports)

Each of these ports enables connection of a USB
device with working current up to 500 mA.

This enables connection of a USB compatible
computer or USB hub.

Notes:
- If a USB cable is required, please use the one

included.

- Before connecting, ensure that the shape of the

USB cable connector is correct.

- For information regarding the USB function (such

as set-up) please refer to the operation manual
of the computer to be connected.

- Some computers, OS and other devices may not

be able to be activated. To ascertain a certain
device's USB compatibility, please contact the
manufacturer of the device.

Audio input terminal

Audio cable

Audio output terminal

Headphone
terminal

Headphones

Power cord

AC outlet

Power terminal

USB cable

Downstream

Upstream

1.Turn on the main power of the monitor.

- When switching the main power switch on and

off, always wait for an interval of at least 5
seconds. Rapid switching may result in
malfunction.

2.Press the monitor's POWER button.

The power LED will light up orange.

3.Turn on the computer.

ON

When a signal is input from the computer, the
power LED lights up green, and the screen is
displayed (After power is turned on, it may take a
little time until the screen is displayed.)
- If the input terminal to which the computer is

connected has not been selected, the screen
will not be displayed. If necessary, perform
input terminal switching.

Notes: (when using an analog signal)
- If using the monitor for the first time or after

having changed the system settings during use,
perform an automatic screen adjustment (p. 14).

- When connecting to a notebook, if the notebook

computer's screen is set so that it is displaying at
the same time, the MS-DOS screen may not be
able to display properly. In this case, change the
settings so that only the monitor is displaying.

Use the INPUT button to switch between signal
input terminals.

Input terminal 1

Input terminal 2

INPUT-1

<             >

INPUT-2

<             >

INPUT

The input signal type (ANALOG/DIGITAL) is
displayed within angle brackets <  >.

1. Turn the computer off.
2. Press the monitor's POWER button.

The Power LED will disappear.

OFF

If the monitor will not be used for a long time,
turn off the main power switch of the monitor, and
remove the power plug from the outlet.

Turn on the
computer

Press power button

Main power switch

Turn the computer
off

Press power button