DOWNLOAD Sharp LL-171ME (serv.man5) Service Manual ↓ Size: 1.56 MB | Pages: 56 in PDF or view online for FREE

B

A

A

14

15

16
17

18
19

20

21

14. Handle
15. 21-pin Euro-SCART (RGB) terminal
16. Video input terminal
17. Audio input terminal - Left
18. Audio input terminal - Right
19. S-video input terminal
20. Antenna input terminal
21. Lug-hole for cable clamp (See next page.)

 A  Ventilation openings
Never block the ventilation openings as this may
lead to overheating inside the monitor and result
in malfunction.

 B  Security lock anchor
By connecting a security lock (commercially
available) to the security lock anchor, the monitor
is fixed so that it cannot be transported. The
security slot works in conjunction with Kensington
Micro Saver Security Systems.

POWER

PC

AV2

AV1

TV

SLEEP

OK

MENU

BRIGHT

DISPLAY

FREEZE

/HOLD

SOUND

CH

SUBPAGE

SUBTITLE

VIEW MODE

TEXT

REVEAL

PIP

BRIGHT

MODE

4

5

7

6

3

2

1

9

10

11

8

14

15

12

16

17

18

13

19

20

21

22

1. POWER button
2. SUBPAGE button
3. REVEAL button
4. SLEEP button
5.

       buttons and OK button

6. BRIGHT MODE button
7. Red, Green, Yellow and Cyan buttons

(for Teletext)

8. DISPLAY button
9. FREEZE/HOLD button
10. Channel buttons
11.

 (flashback) button

12. VIEW MODE button
13. PIP (Picture in Picture) button
14. Input buttons (PC, TV, AV1, and AV2)
15. TEXT button (for Teletext)
16. SUBTITLE button
17. MENU button
18. BRIGHT button
19.

 (mute) button

20. SOUND button
21.

 (volume) + – buttons

22.

   (channel) buttons

AV-IN1

AV-IN2

LL-171ME_gb_01.PMD

2/2/2004, 2:43 PM

7

Use the supplied cable clamp to secure the cables
connected to the terminals.

- When adjusting the viewing angle, cables may

be pulled. Therefore, ensure that the cables
have sufficient slack.

Adjust to an easy to view angle.

- Be sure to hold both sides of the monitor when

adjusting the viewing angle. The LCD panel
used in this monitor is made of glass. Pressure
from hands on the LCD panel could cause
damage.

- Be careful not to allow your fingers to be pinched.

approx. 20°

approx. 5°

You can connect headphones (commercially
available) to the monitor.

Note:
- When the headphones are connected, no sound

can be heard from the monitor speakers.

Headphone
terminal

Headphones

LL-171ME_gb_01.PMD

2/2/2004, 2:43 PM

8

Before using the monitor for the first time, install two R-03 (“AAA” size, UM/SUM-4) batteries (supplied).
When the batteries become depleted and the remote control fails to operate, replace the batteries with
new R-03 (“AAA” size, UM/SUM-4) batteries.

Improper use of batteries can result in chemical leakage and/or explosion. Be sure to follow the
instructions below.
- Place batteries with their terminals corresponding to the (+) and (–) indications.
- Different types of batteries have different characteristics. Do not mix batteries of different types.
- Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new battery

and/or cause the old battery to leak chemicals.

- Remove batteries when they become weak.

Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe with a cloth.

- The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
- If the remote control will not be used for an extended period of time, remove the batteries from the

remote control.

Use the remote control by pointing it towards the remote sensor window on the monitor. Objects between
the remote control and sensor window may prevent proper operation.

- Do not expose the remote control to shock.

In addition, do not expose the remote control to liquid, and do not place in an area with high humidity.

- Do not install or place the remote control under direct sunlight. The heat may deform the unit.
- The remote control may not work properly if the remote sensor window of the monitor is under direct

sunlight or strong lighting. In such case, change the angle of the lighting or monitor, or operate the
remote control closer to the remote sensor window.

- Do not use the remote control simultaneously with remote controls of other equipments.

 Open the battery

cover.

Slide the cover while
pressing the ( ) part.

 Insert two R-03 (“AAA” size,

UM/SUM-4) batteries.

+

+

-

-

Position the positive and
negative ends of the batteries
as indicated in the compartment.

 Close the battery

cover.

Engage the claw on the
cover into the battery
housing and slide shut.

LL-171ME_gb_01.PMD

2/2/2004, 2:43 PM

9

- When connecting, ensure that the monitor and all the equipment you are connecting to it are switched

off.

- Be careful not to over bend the cable or add extension cords as this could lead to a malfunction.
- When using the monitor for the first time or after having changed the system settings during use,

perform an automatic screen adjustment (see page E17).

See page E6 for information on removing/replacing the terminal cover.

Audio output terminal
The monitor’s speakers will play the computer’s
audio when you connect the two devices with the
PC audio cable accessory.

Notes:
- Depending on the computer or OS, you may

have to install the set-up information for the
monitor. (See page E26.)

- When connecting to a notebook and the

notebook computer’s screen is set so that it is
displaying at the same time, the MS-DOS screen
may not be able to display properly. In this case,
change the settings so that only the monitor is
displaying.

If connecting to a D-sub15 pin 2 row Apple Power
Macintosh, attach a Macintosh conversion adapter
(commercially available) to the analog signal
cable.

Macintosh conversion adapter

Analog RGB terminal
(Mini D-sub15 pin 3 rows)
Paying attention to the connector direction, firmly
insert the signal cable straight into the connector, and
then tighten the screws at both ends.

PC analog signal cable
(accessory)

PC audio cable
(accessory)

Power Macintosh

LL-171ME_gb_01.PMD

2/2/2004, 2:43 PM

10