DOWNLOAD Sharp LL-171ME (serv.man5) Service Manual ↓ Size: 1.56 MB | Pages: 56 in PDF or view online for FREE

The monitor can automatically switch off (standby)
after a specified length of time. This is handy if you
want to watch the monitor at bedtime.
Perform this operation using the remote control.

1. Press the SLEEP button.
2. Specify in how many minutes you want the

monitor to switch off by pressing the SLEEP
button.
The time changes in the following order each
time you press the button:
30 min 

→ 60 min → 90 min → 120 min →

150 min 

→ --- min → 30 min

When the specified time elapses, the monitor
automatically switches off and clears the SLEEP
timer.

Checking the time remaining on the SLEEP
timer
1. Press the DISPLAY button.

The time remaining on the SLEEP timer will be
displayed for several seconds. You can also
check the time remaining by pressing the SLEEP
button once.

Changing the specified time
1. Press the SLEEP button.

The remaining time will be displayed.

2. Change the specified time by pressing the

SLEEP button several times as needed.

Notes:
- When there are only 5 minutes remaining on the

SLEEP timer, the remaining time will be
displayed every minute.

- Pressing the POWER button while the SLEEP

timer is operating will clear the timer.

- Switching to PC mode automatically clears the

SLEEP timer.

- You can also set the SLEEP timer from the

MODE SELECT menu. (See page E46.)

This feature pauses the image from the TV or other
connected AV equipment. This is handy when you
want to write down a recipe or the address for a
prize contest.
Perform this operation using the remote control.

1. Press the FREEZE/HOLD button.

The images will pause.

1. Press the FREEZE/HOLD button again.

Notes:
- You cannot pause the TV or video image in the

picture-in-picture window.

- Changing channels or switching the display

mode (input) automatically cancels pausing.

You can return to the previous channel you were
watching.
Perform this procedure with remote control.

1. Press the 

 button.

The monitor will return to the channel you were
previously watching.

LL-171ME_gb_02.PMD

2/2/2004, 2:43 PM

43

You can adjust TV and video images and perform
various settings using menus for the TV/AV mode.
- All the menus except for the PROGRAMMES

menu are common for TV and AV modes. All the
values set in TV mode will be also applied in AV
mode.

The following procedure describes the basic
operation method. See pages E45 and E46
regarding individual items.

1. Select the TV mode or AV mode.

See page E18 for more information.

2. Display the MENU screen using the MENU

button.

MENU

<

TV/AV

>

PICTURE

>>

PROGRAMMES

>>

AV CONNECTIONS

>>

MODE SELECT

>>

CHILD LOCK

>>

3. Select the menu you want to set using the MENU

button (monitor) or the     buttons (remote
control), and press the OK/BRIGHT MODE
button (monitor) or the OK button (remote
control).

4. Select the item you want to set using the MENU

button (monitor) or the     buttons (remote
control), and press the OK/BRIGHT MODE
button (monitor) or the OK button (remote
control).

5. Change the numbers/values using the

   buttons (monitor) or the     buttons (remote

control).
You can continue to set other items.
Do the following to return to the previous screen:
(1) Select “RETURN” using the MENU button

(monitor) or the     buttons (remote control).

(2) Press the OK/BRIGHT MODE button

(monitor) or the OK button (remote control).

6. Exit the screen using the INPUT button (monitor)

or the MENU button (remote control).

Note:
- If you do not press any buttons for about 30

seconds while in a menu screen, the settings
you made up to that point will be applied and the
screen will automatically disappear.

LL-171ME_gb_02.PMD

2/2/2004, 2:43 PM

44

Notes:
- When a normal picture is not displayed, change the signal type and/or colour system.
- Switching between AV input signals may be slow, depending on the settings in “COLOUR SYSTEM”.

If you want to speed up signal switching, switch “AUTO” in “COLOUR SYSTEM” to the current reception
colour system.

Adjusts contrast.

Adjusts the overall brightness of the screen.

Adjusts the colour depth.

Adjusts the colour tone.

Adjusts the image quality.

Adjusts the colour temperature.
- STD ................. Standard setting for colour tone.
- WARM ............. Colour tone redder than standard.

Resets adjustment values for this menu to their original factory settings.

Sets available programmes automatically. (See page E30.)

Adjusts programmes manually. (See page E31.)

Changes the programme positions freely. (See page E32.)

Erases the individual programme or programmes in a consecutive range.
(See page E32.)

Enters or changes the name of an individual programme. (See page E33.)

Selects the signal type of the external equipment connected to AV-IN1.
- AUTO .............. Original factory setting.
- CVBS .............. Composite video signal.
- Y/C .................. S-video signal.

Selects the colour system of the external equipment connected to AV-IN1:
PAL/SECAM/N358(NTSC 3.58)/N443(NTSC 4.43)/PAL60/PAL-M/PAL-N.

Sets whether to temporarily output the image and sound of AV-IN1 in TV
mode.
- OFF ................. Original factory setting.
- ON .................. Responds to the signal from AV-IN1 in TV mode.

Selects the colour system of the external equipment connected to AV-IN2:
PAL/SECAM/N358(NTSC 3.58)/N443(NTSC 4.43)/PAL60/PAL-M/PAL-N.

Resets adjustment values for this menu to their original factory settings.

LL-171ME_gb_02.PMD

2/2/2004, 2:43 PM

45

Sets unlock or lock for all programmes, or sets an individual programme
lock. (See page E40.)
- OFF ................. Original factory setting.
- ALL ................. Locks all TV programmes and video images in AV mode.
- INDIVIDUAL ... Locks the specified TV programmes only.
When “STATUS” in the CHILD LOCK menu is “ALL” or “INDIVIDUAL”,
TV/AV-IN SOUND is not available in PC mode (see page E21).

Selects the programme to be locked when “INDIVIDUAL” is selected for
“STATUS”. (See page E40.)

Resets adjustment values for this menu to their original factory settings.
However, the PIN you have set is not cleared. Concerning the PIN, refer to
the end of this manual for “Disengaging Child Lock”.

Selects the screen size.
- NORMAL ........ Displays the screen at 4:3.
- WIDE .............. Displays the screen at 16:9.
- ZOOM1 ........... Enlarges and displays the entire screen, but with a

smaller screen size than “ZOOM2”. Please use this mode
when captions or telops at the top or bottom of the screen
are cut off.

- ZOOM2 ........... Enlarges and displays the entire screen at 4:3.
You can also set this item using the remote control. (See page E47.)
When you select “ZOOM1” or “ZOOM2”, the top and bottom of the screen
will be cut off slightly.

Specifies how many minutes until the monitor switches off (standby).
This can also be set using the remote control. (See page E43.)

Selects the language (English, German, Spanish, French or Italian) on the
screen. (See page E19.)

Resets adjustment values for this menu to their original factory settings.

LL-171ME_gb_02.PMD

2/2/2004, 2:43 PM

46