Sharp R-879SL (serv.man14) User Manual / Operation Manual ▷ View online
2
YOUR OVEN AND ACCESSORIES
ACCESSORIES:
Check to make sure the following accessories are
provided:
15. Turntable
Check to make sure the following accessories are
provided:
15. Turntable
16. High rack
17. Low rack
• Place the turntable on to the turntable motor
• Place the turntable on to the turntable motor
shaft, ensuring it is located firmly.
• To avoid turntable damage, ensure dishes or
containers are lifted clear of the turntable rim
when removing them from the oven.
when removing them from the oven.
• For use of the racks, refer to grill, convection
and combi cooking sections on pages 12 to 16.
OVEN:
1. Control panel
2. Oven lamp
3. Waveguide cover (DO NOT REMOVE)
4. Bottom grill heating element
5. Turntable motor shaft
6. Oven cavity
7. Door seals and sealing surfaces
8. Door latches
9. Door opening handle
10. Top grill heating element
11. Convection fan
12. Ventilation openings
13. Outer cabinet
14. Power cord
1. Control panel
2. Oven lamp
3. Waveguide cover (DO NOT REMOVE)
4. Bottom grill heating element
5. Turntable motor shaft
6. Oven cavity
7. Door seals and sealing surfaces
8. Door latches
9. Door opening handle
10. Top grill heating element
11. Convection fan
12. Ventilation openings
13. Outer cabinet
14. Power cord
NOTES:
• The waveguide cover is fragile. Care should be taken when cleaning inside the oven to ensure that it
• The waveguide cover is fragile. Care should be taken when cleaning inside the oven to ensure that it
is not damaged.
• After cooking fatty foods without a cover, always clean the cavity and especially the grill heating
elements thoroughly, these must be dry and free from grease. Built-up grease may overheat and
begin to smoke or catch fire.
begin to smoke or catch fire.
• Always operate the oven with the turntable fitted correctly. This promotes thorough, even cooking.
A badly fitted turntable may rattle, may not rotate properly and could cause damage to the oven.
• The turntable rotates clockwise or anti-clockwise. The rotary direction may change each time you
start the oven. This does not affect cooking performance.
• When you order accessories, please quote both the
PART NAME and MODEL NUMBER to
your dealer or SHARP approved service facility. The model number is located at the bottom of the
control panel.
control panel.
WARNING:
The door, outer cabinet, oven cavity, accessories, dishes and especially the grills will
become very hot during operation. To prevent burns, always use thick oven gloves.
become very hot during operation. To prevent burns, always use thick oven gloves.
12
14
13
15
9
3
6
7
8
5 4
10 11
16
17
1
2
R-879 Operation Manual.qxd 4/26/07 6:19 PM Page 2
3
CONTROL PANEL
1. DIGITAL DISPLAY
KEYS:
2. TIME
3. EXPRESS COOK
4. EXPRESS DEFROST
5. PIZZA
6. LESS/MORE
7. INFO
8. START/AUTO MINUTE
9. STOP/CLEAR
10. KITCHEN TIMER/CLOCK SET
11. WEIGHT UP/DOWN
12. COMBI
13. CONV. (
KEYS:
2. TIME
3. EXPRESS COOK
4. EXPRESS DEFROST
5. PIZZA
6. LESS/MORE
7. INFO
8. START/AUTO MINUTE
9. STOP/CLEAR
10. KITCHEN TIMER/CLOCK SET
11. WEIGHT UP/DOWN
12. COMBI
13. CONV. (
0
C)
14. GRILL
15. MICRO POWER
15. MICRO POWER
DIGITAL DISPLAY
INDICATORS:
1. LESS/MORE
2. INFO
3. COOK
4. MICROWAVE
5. CONVECTION
6. BOTTOM GRILL
7. TOP GRILL
INDICATORS:
1. LESS/MORE
2. INFO
3. COOK
4. MICROWAVE
5. CONVECTION
6. BOTTOM GRILL
7. TOP GRILL
1
3
2
4
5
6
7
1
5
3
4
6
8
7
2
9
10
11
15
14
13
12
R-879 Operation Manual.qxd 4/26/07 6:19 PM Page 3
4
IMPORTANT SAFETY INSTRUCTIONS
Oven Use:
• The oven is for domestic food use only.
• Never operate when empty, except as directed
• The oven is for domestic food use only.
• Never operate when empty, except as directed
in the “Grill cooking” section on page 12.
• Do not leave or store anything inside the oven
when not in use.
• Never attempt to use the oven with the door
open. It is important not to force or tamper
with the door safety latches.
with the door safety latches.
• Never operate the oven with any object caught
in the door.
• Do not insert fingers or objects in the holes of
the door latches or air-vent openings as this may
damage the oven and cause an electric shock.
damage the oven and cause an electric shock.
• If water or food drops inside the air vent
openings switch the oven off immediately,
unplug it and call a SHARP approved service
facility. (See page 33).
unplug it and call a SHARP approved service
facility. (See page 33).
• Never move the oven while it is operating.
• The door, outer cabinet, oven cavity, turntable,
• The door, outer cabinet, oven cavity, turntable,
dishes, accessories and especially the grill will
become very hot during operation. Care
should be taken to avoid touching these areas.
To prevent burns, always use thick oven gloves.
Before cleaning make sure they are not hot.
become very hot during operation. Care
should be taken to avoid touching these areas.
To prevent burns, always use thick oven gloves.
Before cleaning make sure they are not hot.
Pacemaker: If you have a heart pacemaker,
consult your doctor or the pacemaker
manufacturer prior to oven use.
consult your doctor or the pacemaker
manufacturer prior to oven use.
FIRE: If smoke is observed, switch off
and unplug the appliance and keep the
door closed in order to stifle any flames.
PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
WARNING: Only allow children to use
the oven without supervision when
adequate instructions have been given so
that the child is able to use the oven in a
safe way and understands the hazards of
improper use.
When the appliance is operated in the
GRILL, CONVECTION, COMBI,
EXPRESS COOK and PIZZA modes,
children should only use the oven under
adult supervision due to the temperature
generated.
Accessible parts may become hot during
use. Young children should be kept away.
WARNING: Liquids and other foods
must not be heated in sealed containers
since they are liable to explode.
Microwave heating of beverages can
result in delayed eruptive boiling,
therefore care has to be taken when
handling the container. Stir the liquid
prior to and during heating/ reheating,
let liquid stand for at least 20 seconds in
the oven after cooking.
INSTALLATION
WARNING:
Inspect the Oven:
• Check the oven carefully for damage
before and regularly after installation.
• Make sure the door closes properly,
that it is not misaligned or warped.
• Check the hinges and door safety
latches are not broken or loose.
• Ensure the door seal and sealing
surfaces are not damaged. If the door
or door seals are damaged, the oven
must not be operated until it has
been repaired by a competent person.
• Inspect the oven interior and door for
dents.
1. Remove all packing materials including the
feature sticker (if applicable). The waveguide
cover prevents food and grease from entering
the waveguide area where it could cause
damage. DO NOT REMOVE THE
WAVEGUIDE COVER.
2. The oven door will become hot during
cooking. Place or mount the oven so that the
bottom of the oven is 85cm or more above
the floor. Ensure the surface or mounting
position is strong enough to take the oven
weight, plus the heaviest item likely to be
cooked in the oven.
IMPORTANT:
If any damage is apparent, do not operate
the oven in any way, until it has been
repaired by a SHARP trained engineer.
R-879 Operation Manual.qxd 4/26/07 6:19 PM Page 4
5
INSTALLATION
3. The minimum
height of free space
necessary above
the top surface of
the oven is 19cm.
4. Do not place the oven where heat, moisture
or high humidity are generated, (for example,
near or above a conventional oven) or near
combustible materials (for example, curtains).
Do not block or obstruct air vent openings.
Do not place objects on top of the oven.
5. Make sure the power supply cord is
undamaged (See “ELECTRICAL
CONNECTION” below).
Do not allow the power supply cord to
run over any hot or sharp surfaces, such
as the hot air vent area at the top rear
of the oven.
6. The socket must be readily accessible so that
it can be easily unplugged in an emergency.
7. Do not use the oven outdoors.
BUILDING-IN-KIT.
This oven is designed for counter top or built-in
use. Do not place the oven in a cabinet.
An installation frame is available which enables
the microwave oven to be integrated within a
kitchen unit.
The microwave oven is not designed to be built
above or near a conventional oven.
SHARP recommend the use of the build in kit
EBR-5000, available from your SHARP dealer.
Only the use of this frame will guarantee the
quality and safety of the oven.
ELECTRICAL CONNECTION.
• Do not allow water to come into contact with
the power supply cord or plug.
• Insert the plug properly into the socket.
• Do not connect other appliances to the same
socket using an adaptor plug.
• If the power supply cord is damaged, it must be
replaced by a SHARP approved service facility
or a similarly qualified person to avoid a hazard.
• When removing the plug from the socket
always grip the plug, never the cord as this may
damage the power supply cord and the
connections inside the plug.
• If the plug fitted to your oven is a rewireable
type and in the event of the socket outlet in
your home not being compatible with the plug
supplied, remove the plug properly (do not
cut off).
• If the plug fitted to your oven is a non-
rewirable type and in the event of the socket
outlet in your home not being compatible with
the plug supplied, cut-off the mains plug.
• Refit with a suitable type, observing the wiring
code given in ‘To replace the mains plug’ on
page 33.
19cm
WARNING: THIS APPLIANCE
MUST BE EARTHED
MUST BE EARTHED
To wire an appropriate plug, follow the wiring
code given in `To replace the mains plug’ on
page 33.
code given in `To replace the mains plug’ on
page 33.
IMPORTANT!
• The fuse from the cut-off plug should be
removed and the plug disposed of in a safe
manner.
• Under no circumstances should the cut-off
plug be inserted into a socket outlet as a
serious electric shock may occur.
• The plug must not be used without the fuse
cover fitted.
• If you have any doubt about your microwave
oven obtain the help of a qualified electrician.
• When replacing the plug please ensure that
you use a BSI or ASTA approved plug to
BS1363, this should be fitted with a brown
coloured 13 amp fuse approved by BSI or
ASTA to BS1362. If you have any doubt about
electrical connection seek the help of a
qualified electrician.
R-879 Operation Manual.qxd 4/26/07 6:19 PM Page 5
