DOWNLOAD Sharp R-875M Service Manual ↓ Size: 1.24 MB | Pages: 38 in PDF or view online for FREE

6

NOTE:
If you are unsure how to connect your oven, please
consult an authorised, qualified  electrician.
Neither the manufacturer nor the dealer can accept
any liability for damage to the oven or personal
injury resulting from failure to observe the correct
electrical connection procedure.
Water vapour or drops may occasionally form on
the oven walls or around the door seals and
sealing surfaces. This is a normal occurrence and is
not an indication of microwave leakage or a
malfunction.

Do not use metal utensils, which reflect microwaves
and may cause electrical arcing. Do not put cans
in the oven.
Use only the turntable designed for this oven.
Do not place anything on the outer cabinet during
operation. 
Do not use plastic containers for microwaving if the
oven is still hot from using the GRILL,
CONVECTION,  DUAL and  AUTOMATIC
operation (except AUTO DEFROST), because they
may melt.  Plastic containers must not be used
during above modes unless the container
manufacturer says they are suitable.

✓

Remove this film

1. Remove all packing materials from the inside of the

oven cavity. Discard the loose polythene sheet from
between the door and cavity.  Remove the feature
sticker, if attached, from the outside of the door.

2. Check the oven carefully for any signs of damage.

3. Place the oven on a flat, level surface strong

enough to support the oven’s weight plus the
heaviest item likely to be cooked.

6. Ensure there is a minimum of free space above the

oven of 19 cm.

7. Securely connect the plug of the oven to a

standard earthed (grounded) household electrical
outlet.

19 cm

R-875+885 English  3/18/02  8:59 AM  Page 6

ENGLISH

7

Your oven initially has English selected as the
language.  To change to a language of your choice,
scroll through the options available by pressing the
LANGUAGE button as shown in the table opposite.
Then press the +1MIN/START

button.

Press LANGUAGE button

once 

twice

3 times
4 times
5 times
6 times

LANGUAGE

ENGLISH

DEUTSCH

NEDERLANDS

FRANCAIS

ITALIAN

ESPANOL

Your oven comes pre-set for Energy Save Mode so
when you first plug it in nothing will appear on the
digital display.
To operate the oven in Energy Save Mode:
1. Plug in the oven. Nothing will appear on the 

display at this time.

2. Open the door. The oven display will show

“SELECT LANGUAGE” in 6 languages.

3. Close the door.
4. Select a language (see below).
5. Heat the oven without food (See page 11).

NOTE:
You can change to Clock Set Mode if you prefer,
see page 9 of the operation manual. If you decide
to set the clock, Energy Save Mode does not work.

COOKING HINTS:
Your oven has an 'Information Display System' which
allows you to access step by step instructions for each
of the ovens features/buttons.  Instructions will appear
in the digital display each time you press a button to
inform you of the next operation step.

1. Choose the desired

language

2. Start the setting.

NOTE: The selected language will be memorised, even if the electrical power supply is interrupted.

Example:
Suppose you want to select Italian.

In Energy Save Mode, if you do not operate the oven for 3 minutes or more (i.e. closing the door,
pressing the STOP key, or at the end of cooking), you will not be able to operate the oven until you
open and close the oven door.

R-875+885 English  3/18/02  8:59 AM  Page 7

8

Your oven has two operating modes, Energy Save Mode and Clock Set Mode.
The difference between them is that when you are not using the oven, in Energy save Mode nothing will
appear on the digital display and in Clock Set Mode the time will be shown. 

In Energy Save Mode, if you do not operate the oven for 3 minutes or more (i.e. closing the door, pressing
the STOP key, or at the end of cooking), you will not be able to operate the oven.
To restore power on, open the door.

To start energy save mode manually, follow the instructions below.

Example:
To start the energy save mode, (the current time is 23:35):

1. Make sure the

correct time
appears on the
display.

3. Adjust the display

to 0 by rotating the
TIME/WEIGHT
dial.

2. Press the

INFO/CLOCK
button twice.

4. Press +1min/START

button. The power will be
off and the display will
show nothing.

Use the STOP button to:

1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, press 

the STOP button twice.

R-875+885 English  3/18/02  8:59 AM  Page 8

9

ENGLISH

Your oven has 5 power levels. To choose the power level, follow the advice given in the recipe section. 

• To select Microwaving, rotate the COOKING MODE dial to the            MICROWAVE setting.
• Select the desired microwave power setting by pressing the MICROWAVE POWER LEVEL button.
• If the MICROWAVE POWER LEVEL button is pressed once,        (100 %) will be displayed.

If you miss your desired level, continue pressing the MICROWAVE POWER LEVEL button until you reach
the level again.

• If the power level is not selected, the level 900 W (100 %) is automatically set.

“ENERGY SAVE MODE” in 6 languages.
If this occurs during cooking, the programme will
be erased. The time of day will also be erased. 

5. When you want to reset the time of day, follow the

above example again.

6. If you do not set the clock, press the STOP button

once. “.0” will appear on the display. When the
operation of the oven is finished, “.0” will
reappear on the display instead of the time of day.

7. If you set the clock, energy save mode does not

work.

There are two setting modes: 12 hour clock and 24 hour clock.

1. Choose the 24 hour clock by

pressing the INFO/CLOCK
button 3 times.

2. Set the hours. Rotate the TIME/

WEIGHT dial clockwise until the
correct hour is displayed.

3. Change from hours to

minutes by pressing the
INFO/CLOCK button once.

4. Set the minutes. Rotate the TIME/

WEIGHT dial clockwise until the
correct minutes are displayed.

5. Press the INFO/CLOCK

button once to start the clock.

NOTES: 
1. You can rotate the TIME/WEIGHT dial clockwise

or counter clockwise.

2. Press the STOP button if you make a mistake

during programming.

3. If the oven is in cooking mode and you wish to

know the time of day, touch the INFO/CLOCK
button. As long as your finger is touching the
button, the time of day will be displayed.

4. If the electrical power supply to your microwave

oven is interrupted, plug in the oven again, then
open and close the door. The display will show:

1. To set the 12 hour clock, press

the INFO/CLOCK button
twice, as shown:

To set the 24 hour clock to 23:35: 

2. To set the 24 hour clock, press

the INFO/CLOCK button 3
times, as shown:

R-875+885 English  29/05/2002  08:53  Page 9