DOWNLOAD Sharp R-872M (serv.man9) Service Manual ↓ Size: 2.33 MB | Pages: 68 in PDF or view online for FREE

Model
R-872M (serv.man9)
Pages
68
Size
2.33 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Home Appliance / Microwave Oven
File
r-872m-sm9.pdf
Date

Sharp R-872M (serv.man9) User Manual / Operation Manual ▷ View online

Inspect the Oven:
Check the oven carefully for damage
before and regularly after installation.
• Make sure the door closes properly,
that it is not  misaligned or warped.
• Check the hinges and door safety
latches are not broken or loose.
• If the door or door seals are
damaged, the oven must not be
operated until it has been repaired by a
competent person.
• Inspect the oven interior and door for
dents.
Important:  
If any damage is apparent, do not
operate the oven in any way.  Contact
your dealer or an authorised Service
Technician appointed by SHARP. 
4
INSTALLATION
IMPORTANT SAFETY INSTRUCTIONS
Oven Use:
• The oven is for domestic food preparation only.
Never operate when empty, except as directed in the
operation manual (see page 12).  
• Do not leave or store anything inside the oven when
not in use.
• Never attempt to use the oven with the door open. It
is important not to force or tamper with the door
safety latches. This may result in exposure to
microwave energy.
• Never operate the oven with any object caught in the
door sealing surfaces, this again may cause
microwave leakage.
• Do not insert fingers or objects in the holes of the door
latches or air-vent openings as this may damage the
oven and cause an electric shock.     
• If water or food drops inside the air vent openings
switch off the oven immediately, unplug it and call a
Service Technician appointed by SHARP.  
• Never attempt to move the oven while it is operating.
• Do not hold the lower grill heater up other than for
cleaning.
WARNING: Only allow children to use the
oven without supervision when adequate
instructions have been given so that the child
is able to use the oven in a safe way and
understands the hazards of improper use. Do
not allow anyone to play with the oven, or
lean or swing on the oven door.
Pacemaker: 
If you have a heart pacemaker,
consult your doctor or the pacemaker manufacturer
prior to oven use.
1.Remove all packing materials including the feature
sticker. Do not remove the plastic film from the inside
of the oven window as this protects it from dirt.
2.Place oven on a secure, level surface, strong enough
to take the oven weight, plus the heaviest item likely
to be cooked in the oven.
3.Do not place the oven where heat, moisture or high
humidity are generated, (for example, near or above
a  conventional oven) or near combustible materials
(for example, curtains). Do not block or obstruct air
vent openings, as obstructions may ignite due to the
emission of hot air.
5. Ensure there is a minimum
of free space above the
oven of 20cm.
4.Make sure the power supply
cord is undamaged (See Installation next page) and
that it does not run under the oven or over any hot or
sharp surfaces. 
5.The socket must be readily accessible so that it can
be easily unplugged in an emergency.
Fire:  If smoke is observed, switch off or
unplug the appliance and keep the door
closed in order to stifle any flames
Liquids: Microwave heating of beverages
can result in delayed eruptive boiling,
therefore care has to be taken when
handling the container; stir liquid prior to
and during heating/reheating, let liquid
stand in the oven at the end of heating.
WARNING:
IMPORTANT: PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
20cm
R- 872M Op Man/Ck Bk  28/6/99  11:18 am  Page 4
5
INSTALLATION (Continued)
6. The oven door may become hot during cooking. 
Place or mount the oven so that the bottom of the
oven is 85cm or more above the floor.
7. Do not use the oven outdoors.
BUILDING-IN-KIT
An installation frame is available which enables the
microwave oven to be integrated within a kitchen unit.
The microwave oven is not designed to be built above
or near a conventional oven.
SHARP recommend the use of the build in kit, 
EBR-4700, available from your SHARP dealer. Only
the use of this frame will guarantee the quality and
safety of the oven. When building, follow installation
instructions supplied carefully. 
IMPORTANT ELECTRICAL CONNECTION
• Do not allow water to come into contact with the
power supply cord or plug.
• Insert the plug properly into the socket as the plug
may otherwise overheat and catch fire.
• Do not connect other appliances to the same socket
using an adaptor plug as it may cause the house
wiring to overheat and catch fire.
• If the plug or socket is loose or the power supply
cord is damaged, it must be replaced with a
special cord. The exchange must be made by an
authorised SHARP service agent.
A defective plug, power supply cord or socket may
overheat and catch fire during operation or cause
an electrical shock.
• When removing the plug from the socket always
grip the plug, never the mains lead as this may
damage the power supply cord and the
connections inside the plug.
• The product is fitted with a re-wireable plug. Should
it not be suitable for the socket outlet in your home,
remove the plug and fit an appropriate type,
observing the wiring code on page 63.
If you wish to remove or replace the plug supplied,
ensure the plug is removed properly and not cut off.
When replacing the plug please ensure that you use a
BSI or ASTA approved plug to BS1363, this should be
fitted with a brown coloured 13 amp fuse approved
by BSI or ASTA to BS1362. If you have any doubt
about electrical connection seek the help of a
qualified electrician. 
WARNING - IMPORTANT NOTE
Please note both the Operation Manual and Cookery
Book supplied specify 900W (IEC 705) microwave
output power. This applies only when the oven is
operated on a 230-240V supply.
If your supply is less than 230-240V, it may be
necessary to increase the cooking time when
following the Operation Manual and Cookery Book
instructions.
THIS APPLIANCE MUST BE EARTHED
To wire an appropriate plug, follow the
wiring code on page 63.
WARNING:
BEFORE OPERATION
Your oven has an energy save mode.
1. Plug in the oven. Nothing will appear on the
display at this time.
2. Open the door. The display will flash the message
shown above.
3. Close the door. The display will show “  . 0”.
If you set the clcok, “energy save” mode will be off.
If you keep “energy save” mode, go to step 5.
4. Set the clock, refer to page 6.
5. Heat the oven using the upper and lower grills
without food for 20 minutes. (For operation, 
see NOTES on page 12).
STOP/CLEAR key
Use the STOP/CLEAR key to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, press twice.
STOP/
CLEAR
R- 872M Op Man/Ck Bk  28/6/99  11:19 am  Page 5
SETTING THE CLOCK
6
Your oven is fitted with a 12-hour clock. 
To set the time of day, follow the guidelines given in
the example below:
EXAMPLE:
To set the time of day, 12:35.
1. Press the AUTO
START/CLOCK key
once.
2. Enter the hours, by pressing
the 10 MIN key once and
the 1 MIN key twice.
Check the display.
4. Enter the time by pressing the
10 MIN key three times and
the 1 MIN key five times.
5. Press the AUTO
START/CLOCK key again to
set the clock.
3. Press the AUTO
START/ CLOCK key 
again.
x1
AUTO START
CLOCK
x1
AUTO START
CLOCK
x1
AUTO START
CLOCK
x1
x2
10min.
1min.
x3
x5
10min.
1min.
NOTES:
• If the oven is in cooking or timer mode and you wish to know the time of day, press the AUTO
START/CLOCK key. As long as your finger is pressing the key, the time of day will be displayed.
• If the electrical power supply to your microwave oven is interrupted, plug in the oven again, the open
and close the door. The display will show “.0”. If this occurs during cooking, the programme will be
erased. The time of day will also be erased.
• If the clock is set and cooking is complete, the display will return to show the correct time of day. If the clock
has not been set, the display will show “.0”.
R- 872M Op Man/Ck Bk  28/6/99  11:19 am  Page 6
7
ENERGY SAVE MODE
Your oven has an Energy Save Mode. This facility saves electricity when the oven is not in use.
When you have unpacked your oven and assembled the turntable correctly (please refer to pages 2 & 4)
plug the oven into your electricity supply. Open & close the door. “0” will appear on the display. The oven
is now ready for use.
The oven will default to Energy Save Mode after 2 minutes if not used. In Energy Save Mode the display is
blank and the oven cannot be operated.
To cancel Energy Save Mode:
i) Open & close the door. “0” will be displayed and the oven is ready for use.
ii) Set the clock. Please refer to “Setting the clock” on page 6. (To revert back to Energy Save Mode,
follow the procedure below).
Note: If you unplug your oven at any stage you will have to reset the clock to cancel Energy Save Mode.
To start Energy Save Mode when the clock is set.
1. Make sure 
the correct 
time appears 
on the display.
2. Press the AUTO
START/CLOCK
key twice.
3. Press the START/AUTO
MINUTE key. The 
power will be off and 
the display will show
nothing.
AUTO START
CLOCK
AUTO MINUTE
START
“PRESS START TO SET
ENERGY SAVE MODE”
will appear in the
display.
x2
x1
R- 872M Op Man/Ck Bk  28/6/99  11:19 am  Page 7
Page of 68
Display

Click on the first or last page to see other R-872M (serv.man9) service manuals if exist.