DOWNLOAD Sharp R-82FBSTM (serv.man4) Service Manual ↓ Size: 1.53 MB | Pages: 69 in PDF or view online for FREE

8

Your oven comes pre-set in Energy Save Mode (see page 9 for details).

To operate the oven in Energy Save Mode:
1. Plug in the oven. Nothing will appear on the display at this time.

2. Open the door.

The display will flash:

Close the door.

3. Press the STOP/CLEAR button.

The display will show:

NOTES: In Energy Save Mode, if you do not operate the oven for 3 minutes or more (i.e. after

closing the door, pressing the STOP/CLEAR button, or at the end of cooking), you will
not be able to operate the oven until you open and close the oven door.

When new, the very first time the grills are used, smoke and odour will be given off.
To avoid this happening when food is being cooked, heat the grills without food for approx.
20 minutes. (Please refer to note on page 13.)

HIGH

x 1

100%

MEDIUM HIGH

x 2

70%

MEDIUM

x 3

50%

MEDIUM LOW

x 4

30%

(Defrost)

LOW

x 5

10%

(Defrost)

• Your oven has 5 power levels, as shown

opposite.

• To change the power level for cooking, enter

the cooking time and then press the POWER
LEVEL button.

Power level:
The microwave power level is varied by the
microwave energy switching on and off.
When using power levels other than 100% you
will be able to hear the microwave energy pulsing
on and off as the food cooks or defrosts. 

IMPORTANT: The microwave power level will
cook at 100% unless you press the POWER
LEVEL button to the desired setting.

Check the power level:
To check the microwave power level during
cooking, press the POWER LEVEL button. As
long as your finger is pressing the POWER
LEVEL button the power level will be displayed.
The oven continues to count down although the
display will show the power level.

R-82FBSTM Op Man  18/08/2004  09:01  Page 8

9

Your oven has an Energy Save Mode.
This facility saves electricity when the oven is not
in use.

• If the oven is not used, it will default to Energy

Save Mode after 3 minutes. The display is blank
and the oven cannot be operated.

• To operate the oven, open and then close the

door. “0” will be displayed and the oven is
ready to use.

To cancel Energy Save Mode, set the clock.
(Please refer to page 10.)

To cancel the clock, follow the procedure
opposite. (This will restart Energy Save Mode.)

Notes:
• If you unplug your oven at any stage you will

have to reset the clock to cancel Energy Save
Mode.

• If the clock has been set, cancelling Energy

Save Mode, then your oven has a safety feature
which prevents START/AUTO MINUTE
button from working if the oven has not been
in use for more than 3 minutes. Press the
STOP/CLEAR button or open and close the
door to re-use the oven.

1. Time of day appears on the display.

2. Press the CLOCK SET button once.

4. Press the START/AUTO MINUTE button.

The power will be off and the display will
show nothing.

3. Adjust the display to “0” by rotating the

TIME/WEIGHT knob.

R-82FBSTM Op Man  18/08/2004  09:01  Page 9

10

Your oven has a 12 hour and a 24 hour clock.

• To select the 12 hour clock, press the

CLOCK SET button once.
“12H” will appear on the display.

To set the time of day follow the instructions
opposite.

NOTES: 
• Press the STOP/CLEAR button if you make a

mistake during programming.

• To check the time of day during a cooking

process, press the CLOCK SET button and
the time of day will remain on the display as
long as you keep your finger on the button.
This does not affect the cooking process.

• If the clock is set, when cooking is complete,

the display will show the correct time of day.
If the clock has not been set, the display will
only show “.0” when cooking is complete.

• If the electrical power supply to your

microwave oven is interrupted, the display will
intermittently show “.0” after the power is
reinstated. If this occurs during cooking, the
programme will be erased. The time of day will
also be erased. 

• When you want to reset the time of day,

follow the opposite example again.

• To select the 24 hour clock, press the

CLOCK SET button twice.
“24H” will appear on the display.

1. Select the clock type required.

2. Enter the hours by turning the

TIME/WEIGHT knob.

3. Press the CLOCK SET button once.

4. Enter the minutes by turning the

TIME/WEIGHT knob.

5. To start the clock, press the CLOCK SET

button once.

R-82FBSTM Op Man  18/08/2004  09:01  Page 10

11

• Enter the cooking time and use microwave

power levels 10% to 100% to cook (refer to
page 8).

• Stir or turn the food, where possible, 2 - 3

times during cooking, if required.

• After cooking, cover the food and leave to

stand, if required.

• Refer to the cooking charts in the cookbook

section, pages 37 - 38.

Your oven enables you to cook and defrost food
using the automatic programmes, or to cook and
defrost food manually.
Automatic cooking and defrosting allows you to
cook and defrost using preset programmes
where the timings have been calculated for you,
e.g Auto Cook and Auto Defrost.

Manual cooking and defrosting allows you to
cook/defrost foods and weights which are not
included in the automatic programmes.
The following are examples of manual cooking
and defrosting.
For automatic cooking and defrosting refer to
pages 18 - 22.

Example:
To cook for 2 minutes 30 seconds on 70%
microwave power.

2. Enter the cooking time by turning the 

TIME/WEIGHT knob.

3. Input the power level by pressing the

POWER LEVEL button twice.

Starting the oven:
Close the door and press the
START/AUTO MINUTE
button.

Stopping the oven:
If you want to stop the oven
during cooking, press the
STOP/CLEAR button once or
open the oven door.
If you want to cancel the
cooking programme, press the
STOP/CLEAR button twice.

Opening and closing the door:
To open the oven door, pull the door opening
handle.

The display will count down

through the cooking time.

4. Press the START/AUTO MINUTE button

once to start cooking.

1. Select the cooking mode by turning the 

COOKING MODE knob to MICROWAVE.

R-82FBSTM Op Man  18/08/2004  09:01  Page 11