Sharp Electronics (UK) Limited
Originator AMu Supervisor Approval Date / /
White – Carry out as required, Yellow – Carry out as required and whenever the unit comes in for service, Red – Carry out on all units
Month of Issue:
MICROWAVE TECHNICAL BULLETIN
Page 1 of 1
A new door frame has been introduced. This has allowed the following door assembly
design changes to be made.
1. Delete the glass stopper
2. Reduce the quantity of fixing screws
3. Reduce the number of clips holding the door to the door frame
Use the part numbers below for the new door frames.
When replacing the old door frame with the new one, the glass stopper together with
the hinge side middle screw connection, should be deleted from the assembly.
Door frame brown
Door frame white