Sharp Electronics (UK) Limited CE Technical Support Group
Approval Date / / Reference TB-M9701036
White - Carry out as required Yellow - Carry out as required and whenever unit comes in for service Red - Carry out on all units
Month of Issue :
MICROWAVE TECHNICAL BULLETIN
Page 1 of 1
SYMPTOM When the oven is used on the convection function, it does not reach the correct
Note that if the unit under test is within the specified limit of 250 C +/- 15 C,
then no action is required.
Changes in component tolerances in the oven temperature sensing circuit.
Change the value of R62 to 2k4 ( was originally 2k7 ).
If this does not have the desired effect, then it is permissible to change the value of
R62 to any value between 2k and 2k7 dependent on the resultant temperature.