DOWNLOAD Sharp R-798M (serv.man3) Service Manual ↓ Size: 955.47 KB | Pages: 69 in PDF or view online for FREE

Model
R-798M (serv.man3)
Pages
69
Size
955.47 KB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Home Appliance / Microwave Oven
File
r-798m-sm3.pdf
Date

Sharp R-798M (serv.man3) User Manual / Operation Manual ▷ View online

7
BEFORE OPERATION
Your oven comes pre-set in Energy Save Mode (see page 8 for details).
To operate the oven in Energy Save Mode:
1. 
Plug in the oven. Nothing will appear on the display at this time.
2. Open the door.
The display will flash:
3. Close the door.
The display will show:
NOTES: In Energy Save Mode, if you do not operate the oven for 3 minutes or more (i.e. after
closing the door, pressing the STOP/CLEAR key, or at the end of cooking), you will not be
able to operate the oven until you open and close the oven door.
When new, the very first time the grills are used, smoke and odour will be given off.
To avoid this happening when food is being cooked, heat the grills without food for approx.
20 minutes. (Please refer to note on page 12.)
MICROWAVE POWER LEVELS
Power Level
Press the
Percentage
MICRO
POWER key
HIGH
x 1
100%
MEDIUM HIGH
x 2
70%
MEDIUM
x 3
50%
MEDIUM LOW
x 4
30%
(Defrost)
LOW
x 5
10%
(Defrost)
• Your oven has 5 power levels, as shown
opposite.
• To change the power level for cooking, enter
the cooking time and then press the MICRO
POWER 
key.
Power level:
The microwave power level is varied by the
microwave energy switching on and off.
When using power levels other than 100% you
will be able to hear the microwave energy pulsing
on and off as the food cooks or defrosts. 
IMPORTANT: The microwave power level will
cook at 100% unless you press the MICRO
POWER 
key to the desired setting.
Check the power level:
To check the microwave power level during
cooking, press the MICRO POWER key. As
long as your finger is pressing the MICRO
POWER 
key the power level will be displayed.
The oven continues to count down although the
display will show the power level.
MICRO POWER
KEY
R-798M Operation Manual  23/06/2004  15:19  Page 7
8
ENERGY SAVE MODE
Your oven has an Energy Save Mode.
This facility saves electricity when the oven is not
in use.
• If the oven is not used, it will default to Energy
Save Mode after 3 minutes. The display is blank
and the oven cannot be operated.
• To operate the oven, open and then close the
door. “0” will be displayed and the oven is
ready to use.
To cancel Energy Save Mode, set the clock.
(Please refer to page 9.)
To cancel the clock, follow the procedure
opposite. (This will restart Energy Save Mode.)
Notes:
• If you unplug your oven at any stage you will
have to reset the clock to cancel Energy Save
Mode.
• If the clock has been set, cancelling Energy
Save Mode, then your oven has a safety feature
which prevents START/AUTO MINUTE
key from working if the oven has not been in
use for more than 3 minutes. Press the
STOP/CLEAR key or open and close the
door to re-use the oven.
1. Time of day appears on the display.
2. Press the KITCHEN TIMER/CLOCK
SET key 3 times.
3. Press the START/AUTO MINUTE key.
The power will be off and the display will
show nothing.
x3
x1
R-798M Operation Manual  23/06/2004  15:19  Page 8
9
SETTING THE CLOCK
Your oven has a 12 hour clock.
• To select the 12 hour clock, press the
KITCHEN TIMER/CLOCK SET key twice.
To set the time of day follow the instructions
opposite.
1. Select the clock.
2. Enter the hours by pressing the TIME keys.
3. Press the KITCHEN TIMER/CLOCK SET
key once.
x2
4. Enter the minutes by pressing the TIME keys.
5. To start the clock, press the KITCHEN
TIMER/CLOCK SET key once.
NOTES: 
• Press the STOP/CLEAR key if you make a
mistake during programming.
• If you press any of the TIME keys too many
times, continue to press the key until the
desired time re-appears.
• To check the time of day during a cooking
process, press the KITCHEN
TIMER/CLOCK SET 
key and the time of
day will remain on the display as long as you
keep your finger on the key. This does not
affect the cooking process.
• If the clock is set, when cooking is complete,
the display will show the correct time of day.
If the clock has not been set, the display will
only show “.0” when cooking is complete.
• If the electrical power supply to your
microwave oven is interrupted, the display will
intermittently show “.0” after the power is
reinstated. If this occurs during cooking, the
programme will be erased. The time of day will
also be erased. 
• When you want to reset the time of day,
follow the opposite example again.
x2
x1
x1
R-798M Operation Manual  23/06/2004  15:19  Page 9
10
HOW TO OPERATE YOUR OVEN
MANUAL COOKING
• Enter the cooking time and use microwave
power levels 10% to 100% to cook (refer to
page 7).
• Stir or turn the food, where possible, 2 - 3
times during cooking, if required.
• After cooking, cover the food and leave to
stand, if required.
• Refer to the cooking charts in the cookbook
section, pages 34 - 41.
Your oven enables you to cook and defrost food
using the automatic programmes, or to cook and
defrost food manually.
Automatic cooking and defrosting allows you to
cook and defrost using preset programmes
where the timings have been calculated for you,
e.g Auto Cook and Express Defrost.
Manual cooking and defrosting allows you to
cook/defrost foods and weights which are not
included in the automatic programmes.
The following are examples of manual cooking
and defrosting.
For automatic cooking and defrosting refer to
pages 16 - 19.
Example:
To cook for 2 minutes 30 seconds on 70%
microwave power.
1. Enter the cooking time by pressing the 
1 MIN. key twice, then the 10 SEC. key
three times.
2. Input the power level by pressing the MICRO
POWER key twice.
x2
x2
x3
Starting the oven:
Close the door and press
the START/AUTO
MINUTE 
key.
Stopping the oven:
If you want to stop the oven
during cooking, press the
STOP/CLEAR key once
or open the oven door.
If you want to cancel the
cooking programme, press
the STOP/CLEAR key
twice.
Opening and closing the door:
To open the oven door, pull the door opening
handle.
The display will count down
through the cooking time.
3. Press the START/AUTO MINUTE key
once to start cooking.
x1
R-798M Operation Manual  23/06/2004  15:19  Page 10
Page of 69
Display

Click on the first or last page to see other R-798M (serv.man3) service manuals if exist.