Sharp R-642M (serv.man2) User Manual / Operation Manual ▷ View online
3
CONTROL PANEL
1. DIGITAL
DISPLAY.
2.
AUTO COOK / DEFROST key.
Use for programming the AUTO
COOK/DEFROST menus. This key also
functions as LESS/PLUS key.
Use for programming the AUTO
COOK/DEFROST menus. This key also
functions as LESS/PLUS key.
3.
MICRO/GRILL/DUAL key.
Press to select the desired mode.
Press to select the desired mode.
4.
STOP/CLEAR key.
Press once to stop a programme,
and/or twice to cancel a programme.
Press once to stop a programme,
and/or twice to cancel a programme.
5.
START/AUTO MINUTE key.
Press to start a programme. Press to
cook on 100P (HIGH) for 1 minute or
increase time during cooking in
multiples of 1 minute.
Press to start a programme. Press to
cook on 100P (HIGH) for 1 minute or
increase time during cooking in
multiples of 1 minute.
6.
TIME/WEIGHT keys.
Press to enter the cooking time, and
also the desired weight when using.
AUTO COOK/DEFROST.
Press to enter the cooking time, and
also the desired weight when using.
AUTO COOK/DEFROST.
7.
AUTO DEFROST menu.
8.
AUTO COOK menu.
1
2
3
8
5
4
6
7
R-642M OM & CB 29/6/99 11:16 am Page 3
4
INSTALLATION
IMPORTANT SAFETY INSTRUCTIONS
Oven Use:
• The oven is for domestic food preparation only.
• The oven is for domestic food preparation only.
Never operate when empty.
• Do not leave or store anything inside the oven
when not in use.
• Never attempt to use the oven with the door open.
It is important not to force or tamper with the door
safety latches. This may result in exposure to
microwave energy.
safety latches. This may result in exposure to
microwave energy.
• Never operate the oven with any object caught in
the door sealing surfaces, this again may cause
microwave leakage.
microwave leakage.
• Do not insert fingers or objects in the holes of the
door latches or air-vent openings as this may
damage the oven and cause an electric shock.
damage the oven and cause an electric shock.
• If water or food drops inside the air vent openings
switch off the oven immediately, unplug it and call a
Service Technician appointed by SHARP.
Service Technician appointed by SHARP.
• Never attempt to move the oven while it is
operating.
WARNING:
Only allow children to use the oven without supervision
when adequate instruction has been given so that the
child is able to use the oven in a safe way and
understands the hazards of improper use.
Pacemaker: If you have a heart pacemaker,
consult your doctor or the pacemaker manufacturer
prior to oven use.
when adequate instruction has been given so that the
child is able to use the oven in a safe way and
understands the hazards of improper use.
Pacemaker: If you have a heart pacemaker,
consult your doctor or the pacemaker manufacturer
prior to oven use.
WARNING!
Inspect the Oven:
Check the oven carefully for damage
before and regularly after installation.
Check the oven carefully for damage
before and regularly after installation.
• Make sure the door closes properly,
that it is not misaligned or warped.
• Check the hinges and door safety
latches are not broken or loose.
• Ensure the door seal and sealing
surfaces are not damaged.
• Inspect the oven interior and door for
dents.
Important:
If any damage is apparent, do not
operate the oven in any way. Contact
your dealer or an authorised Service
Technician appointed by SHARP.
Important:
If any damage is apparent, do not
operate the oven in any way. Contact
your dealer or an authorised Service
Technician appointed by SHARP.
1.Remove all packing materials including the feature
sticker. Do not remove the plastic film from the inside
of the oven window as this protects it from dirt.
of the oven window as this protects it from dirt.
2.Place oven on a secure, level surface, strong
enough to take the oven weight, plus the heaviest
item likely to be cooked in the oven.
item likely to be cooked in the oven.
3.Ensure there is a minimum free space above the
oven of 21 cm.
4.Do not place the oven where heat, moisture or high
humidity are generated, (for example, near or
above a conventional oven or kettle) or near
combustible materials (for example, curtains). Do
not block or obstruct air vent openings, as
obstructions may ignite due to the emission of hot
air. Do not place items on top of the oven.
above a conventional oven or kettle) or near
combustible materials (for example, curtains). Do
not block or obstruct air vent openings, as
obstructions may ignite due to the emission of hot
air. Do not place items on top of the oven.
5.Make sure the power supply cord is undamaged
(See Installation next page) and that it does not run
under the oven or over any hot or sharp surfaces.
under the oven or over any hot or sharp surfaces.
6.The socket must be readily accessible so that it can
be easily unplugged in an emergency.
7.Do not use the oven outdoors.
Fire: If food overheats, starts to smoke or
burn: Keep the oven door closed; turn the
oven off; switch off the power at the
socket and disconnect the plug from the
socket. Failure to follow this procedure
may result in fire and oven damage.
burn: Keep the oven door closed; turn the
oven off; switch off the power at the
socket and disconnect the plug from the
socket. Failure to follow this procedure
may result in fire and oven damage.
Liquids: Take care when microwaving
liquids and beverages. To prevent delayed
eruptive boiling of liquid and possible
scalding: Stir liquid prior to and during
heating/reheating, let liquid stand in the
oven at the end of cooking.
liquids and beverages. To prevent delayed
eruptive boiling of liquid and possible
scalding: Stir liquid prior to and during
heating/reheating, let liquid stand in the
oven at the end of cooking.
IMPORTANT: PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
R-642M OM & CB 29/6/99 11:16 am Page 4
5
INSTALLATION
WARNING:
It is hazardous for anyone other than a
competant person to carry out any service
or repair operation which involves the
removal of a cover which gives protection
against exposure to microwave energy.
competant person to carry out any service
or repair operation which involves the
removal of a cover which gives protection
against exposure to microwave energy.
BUILDING-IN-KIT.
This oven is not designed to be built into a kitchen unit.
IMPORTANT! ELECTRICAL CONNECTION.
• Do not allow water to come into contact with the
This oven is not designed to be built into a kitchen unit.
IMPORTANT! ELECTRICAL CONNECTION.
• Do not allow water to come into contact with the
power supply cord or plug.
• Insert the plug properly into the socket as the plug
may otherwise overheat and catch fire.
• Do not connect other appliances to the same socket
using an adaptor plug as it may cause the house
wiring to overheat and catch fire.
wiring to overheat and catch fire.
• If the plug or socket is loose or the power supply
cord is damaged, it must be replaced with a
special cord. The exchange must be made by an
authorised SHARP service agent. Contact your
dealer or a Service Technician appointed by
SHARP.
A defective plug, power supply cord or socket may
overheat and catch fire during operation or cause
an electrical shock.
special cord. The exchange must be made by an
authorised SHARP service agent. Contact your
dealer or a Service Technician appointed by
SHARP.
A defective plug, power supply cord or socket may
overheat and catch fire during operation or cause
an electrical shock.
• When removing the plug from the socket always
grip the plug, never the mains lead as this may
damage the power supply cord and the
connections inside the plug.
damage the power supply cord and the
connections inside the plug.
• The product is fitted with a re-wireable plug. Should
it not be suitable for the socket outlet in your home,
remove the plug and fit an appropriate type,
observing the wiring code given in “To replace the
mains plug” on page 36.
remove the plug and fit an appropriate type,
observing the wiring code given in “To replace the
mains plug” on page 36.
If you wish to remove or replace the plug supplied,
ensure the plug is removed properly and not cut off.
When replacing the plug please ensure that you use a
BSI or ASTA approved plug to BS1363, this should be
fitted with a brown coloured 13 amp fuse approved
by BSI or ASTA to BS1362. If you have any doubt
about electrical connection seek the help of a
qualified electrician.
ensure the plug is removed properly and not cut off.
When replacing the plug please ensure that you use a
BSI or ASTA approved plug to BS1363, this should be
fitted with a brown coloured 13 amp fuse approved
by BSI or ASTA to BS1362. If you have any doubt
about electrical connection seek the help of a
qualified electrician.
WARNING
THIS APPLIANCE MUST BE EARTHED
To wire an appropriate plug, follow the wiring code
given in “To replace the mains plug” on page 36.
To wire an appropriate plug, follow the wiring code
given in “To replace the mains plug” on page 36.
BEFORE OPERATION
Plug in the oven.
1. The oven display will flash:
2. Touch the STOP/CLEAR key the display will
1. The oven display will flash:
2. Touch the STOP/CLEAR key the display will
show:
To set the clock, see page 6.
Use of the STOP/CLEAR key.
Use the STOP/CLEAR key to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, touch twice.
Use the STOP/CLEAR key to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, touch twice.
1.
2.
STIR
TURN
KG / %
GRILL
MICRO COOK
STIR
TURN
KG / %
GRILL
MICRO COOK
Heat the oven using GRILL mode without food for
20 minutes. See note on page 9.
20 minutes. See note on page 9.
R-642M OM & CB 29/6/99 11:16 am Page 5
SETTING THE CLOCK
6
x1
x5
x9
Your oven is fitted with a clock which can be set to the time of day.
There are two setting modes: 12 hour clock and 24 hour clock.
There are two setting modes: 12 hour clock and 24 hour clock.
To set the 12 hour clock, hold the
MICRO/GRILL/DUAL key for three seconds.
“12H” will appear on the display.
MICRO/GRILL/DUAL key for three seconds.
“12H” will appear on the display.
To set the 24 hour clock, press the
MICRO/GRILL/DUAL key once more after step 1, in
the example below. “24H” will appear in the display.
MICRO/GRILL/DUAL key once more after step 1, in
the example below. “24H” will appear in the display.
Example:
To set the 24 hour clock to 22:59 :
To set the 24 hour clock to 22:59 :
x2
x2
3. Press the 10 min
key twice and the 1
min key twice to
enter the hours.
min key twice to
enter the hours.
1. Press the MICRO/GRILL/
DUAL key and hold for
three seconds.
three seconds.
4. Press the
MICRO/GRILL/
DUAL key once.
DUAL key once.
Check the display.
6. Press the MICRO/GRILL/
DUAL key once to start
the clock.
the clock.
5. Press the 10 min key 5
times and the 1 min
key 9 times to enter
the minutes.
key 9 times to enter
the minutes.
STIR
TURN
KG / %
GRILL
MICRO COOK
x1 for three secs
x1
x1
x1 for three secs
2. Select the 24 hour clock.
x1
R-642M OM & CB 29/6/99 11:16 am Page 6
Click on the first or last page to see other R-642M (serv.man2) service manuals if exist.