DOWNLOAD Sharp R-21ATP Service Manual ↓ Size: 952.34 KB | Pages: 40 in PDF or view online for FREE

Model
R-21ATP
Pages
40
Size
952.34 KB
Type
PDF
Document
Service Manual
Brand
Device
Home Appliance / Microwave Oven
File
r-21atp.pdf
Date

Sharp R-21ATP Service Manual ▷ View online

R-21ATP
39
  SERVICE MANUAL
SHARP CORPORATION
S5305R21ATPKP
COMMERCIAL
MICROWAVE OVEN
MODEL
R-21ATP
In interests of user-safety the oven should be restored to its
original condition and only parts identical to those specified
should be used.
TABLE OF CONTENTS
Page
SERVICING ................................................................................................................. INSIDE FRONT COVER
CAUTION, MICROWAVE RADIATION .............................................................................................................  1
WARNING .......................................................................................................................................................... 1
PRODUCT SPECIFICATIONS .........................................................................................................................  2
GENERAL INFORMATION ................................................................................................................................ 2
APPEARANCE VIEW .......................................................................................................................................  3
OPERATION SEQUENCE ................................................................................................................................  4
FUNCTION OF IMPORTANT COMPONENTS ................................................................................................   5
TROUBLESHOOTING GUIDE .......................................................................................................................... 6
TEST PROCEDURE .........................................................................................................................................  7
TOUCH CONTROL PANEL ASSEMBLY ........................................................................................................ 13
COMPONENT REPLACEMENT AND ADJUSTMENT PROCEDURE ...........................................................  20
MICROWAVE MEASUREMENT ....................................................................................................................  27
WIRING DIAGRAM .........................................................................................................................................  28
PICTORIAL DIAGRAM ...................................................................................................................................  29
CONTROL PANEL CIRCUIT ........................................................................................................................... 30
PRINTED WIRING BOARD ............................................................................................................................. 31
PARTS LIST ...................................................................................................................................................  32
1000W/ R-21ATP
DEF
ON
NO. X2 CHECK
40
R-21ATP
SERVICING
 WARNING TO SERVICE PERSONNEL
Microwave ovens contain circuitry capable of producing very high voltage and current. Contact with following
parts will result in electrocution.
High voltage capacitor, High voltage transformer, Magnetron, High voltage rectifier, High voltage fuse, High
voltage harness.
REMEMBER TO CHECK 3D
1) Disconnect the supply.
2) Door opened, and wedged open.
3) Discharge high voltage capacitor.
WARNING: AGAINST THE CHARGE OF THE HIGH-VOLTAGE CAPACITOR.
The high-voltage capacitor remains charged about 60 seconds after the oven has been switched off. Wait
for 60 seconds and then short-circuit the connection of the high-voltage capacitor (that is, of the connecting
lead of the high-voltage rectifier) against the chassis using a screwdriver with an insulated handle.
Sharp recommend that wherever possible fault-finding is carried out with the supply disconnected. In some
cases, it may be necessary to connect the supply with the cover removed to carry out fault investigation in the
circuitry. In such cases, the high voltage circuit should be disabled as described below to reduce the hazards:-
Carry out 3D checks (see above)
Disconnect the supply leads from the high voltage transformer, making a note of the polarity. Insulate the
connectors, ensuring they are positioned away from the transformer and fastened there.
Connect any relevant test equipment e.g. voltmeter.
Reconnect the oven to the supply, then close the door.
Note the results of the test, taking care to keep clear of the operational oven.
Carry out 3D checks (see above).
Reconnect the leads to the transformer. Take care to observe correct polarity.
Carry out 4R checks (see below).
Microwave ovens should not be used without load. To test for the presence of microwave energy within a
cavity, place a cup of cold water on the ceramic shelf, close the door and set the microwave timer for one (1)
minute, set the power level to HIGH (100%) and push the start key. When the one (1) minute has elapsed
(timer at zero) carefully check that the water is now hot.
AFTER REPAIR REMEMBER TO CHECK 4R
1) Reconnect all leads removed from components during testing.
2) Replace the outer case (cabinet).
3) Reconnect the supply.
4) Run the oven. Check all functions.
When all service work is completed and the oven is fully assembled, the microwave power output should be
checked and microwave leakage test should be carried out.
IMPORTANT: If the oven becomes inoperative because of a blown fuse M10A Fuse, check the monitored 1st.
interlock switch and monitor switch before replacing the fuse M10A.
WARNING: WIRING / RE-WIRING
Before carrying out any work; carry out 3D checks.
1) Disconnect the power supply.
2) Open the door and wedge open.
3) Discharge the high voltage capacitor.
RE-WIRING
1) Wires must not touch:
a) High voltage parts:
b) Parts that become hot.
c) Sharp edges
d) Movable parts
2) Positive lock connectors are fitted correctly.
3) Wires are connected correctly as per pictorial dia-
gram.
4) Now wire leads are trapped by the outer wrap.
R-21ATP
1
TEST PROCEDURE
SERVICING AND
TROUBLESHOOTING CHART
FUNCTION OF IMPORTANT
COMPONENTS
OPERATING SEQUENCE
APPEARANCE VIEW
PRODUCT SPECIFICATIONS
WIRING DIAGRAM
PARTS LIST
MICROWAVE MEASUREMENT
CONTROL PANEL ASSEMBLY
COMPONENT REPLACEMENT
 AND ADJUSTMENT PROCEDURE
SERVICE MANUAL
COMMERCIAL
MICROWAVE OVEN
  R-21ATP
GENERAL IMPORTANT INFORMATION
This Manual has been prepared to provide Sharp Corp. Service
engineers with Operation and Service Information.
It is recommended that service engineers carefully study the
entire text of this manual, so they will be qualified to render
satisfactory customer service.
CAUTION
MICROWAVE RADIATION
DO NOT BECOME EXPOSED TO RADIATION FROM THE
MICROWAVE GENERATOR OR OTHER PARTS CONDUCTING
MICROWAVE ENERGY.
Service engineers should not be exposed to the microwave energy
which may radiate from the magnetron or other microwave gener-
ating devices if it is improperly used or connected. All input and
output microwave connections, waveguides, flanges and gaskets
must be secured. Never operate the device without a microwave
energy absorbing load attached. Never look into an open
waveguide or antenna while the device is energized.
SHARP CORPORATION
OSAKA, JAPAN
WARNING
Never operate the oven until the following points are ensured.
(A) The door is tightly closed.
(B) The door brackets and hinges are not defective.
(C) The door packing is not damaged.
(D) The door is not deformed or warped.
(E) There is not any other visible damage with the oven.
Servicing and repair work must be carried out only by trained
service engineers.
All the parts marked "*" on parts list are used at voltages more than
250V.
Removal of the outer wrap gives access to potentials above 250V.
All the parts marked "
" on parts list may cause undue microwave
exposure, by themselves, or when they are damaged, loosened
or removed.
2
R-21ATP
PRODUCT DESCRIPTION
SPECIFICATION
ITEM
DESCRIPTION
Power Requirements
230 - 240 Volts
50 Hertz
Single phase, 3 wire earthed
Power Output
1000 W nominal of RF microwave energy (measured by method of IEC 705)
Operating frequency 2450 MHz
Case Dimensions
Width
520 mm
Height
309 mm including foot
Depth
406 mm
Cooking Cavity Dimensions
Width
351 mm
Height
211 mm
Depth
372 mm
Control Complement
Touch Control System
Timer (0 - 99 minutes and 99 seconds)
Microwave Power for Variable Cooking
 Repetition Rate;
P-HI ........................................... Full power throughout the cooking time
P-90 ............................................................. approx. 90% of Full Power
P-80 ............................................................. approx. 80% of Full Power
P-70 ............................................................. approx. 70% of Full Power
P-60 ............................................................. approx. 60% of Full Power
P-50 ............................................................. approx. 50% of Full Power
P-40 ............................................................. approx. 40% of Full Power
P-30 ............................................................. approx. 30% of Full Power
P-20 ............................................................. approx. 20% of Full Power
P-10 ............................................................. approx. 10% of Full Power
P-0 ............................................. No power throughout the cooking time
DOUBLE QUANTITY pad
EXPRESS DEFROST pad
Number pads
SELECT TIME pad
STOP/CLEAR pad
SELECT POWER pad
START pad
SET pad
CHECK pad
SIGNAL pad
Set Weight
Approx. 18 kgGENERAL INFORMATION
WARNING
THIS APPLIANCE MUST BE EARTHED
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE:
GREEN-AND-YELLOW
: EARTH
BLUE
: NEUTRAL
BROWN
: LIVE
Page of 40
Display

Sharp R-21ATP Service Manual ▷ Download

  • DOWNLOAD Sharp R-21ATP Service Manual ↓ Size: 952.34 KB | Pages: 40 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sharp R-21ATP in PDF for free, which will help you to disassemble, recover, fix and repair Sharp R-21ATP Microwave Oven. Information contained in Sharp R-21ATP Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.