DOWNLOAD Sharp R-1900M (serv.man13) Service Manual ↓ Size: 209.07 KB | Pages: 2 in PDF or view online for FREE

<Single Stage Cooking> 
E.g. 3 mins at 100% power. 

E.g. 3 mins 30 secs at 60% power. 

 
 
  *The POWER LEVEL pad does not need to be pressed to select 100% power. 
**Refer to Microwave Power Level in Operation Manual page EN-10. 
<Multi-Stage Cooking> 
E.g. 1 min at 100% power, 2 mins at 70% power, 2 mins 30 secs at 100% power. 
 
 
*The POWER LEVEL pad does not need to be pressed to select 100% power at last stage. 
**Refer to Microwave Power Level in Operation Manual page EN-10. 
***Maximum 4 stages can be programmed. 
****If the cooking time is exceeded, error message, EE9 will be displayed. 
To clear it press the STOP/CLEAR pad and reduce the Total Cooking Time, power level. 
<Express Defrost> Refer to the Express Defrost Chart in the Operation Manual page EN-11. 
E.g. Defrost for 3 mins and 30 secs. 

 

CUSTOM SETTING (11 operations to customize your oven, Factory settings are in bold.) 

MANUAL COOKING 

MEMORY COOKING 

 

 

 

            (Auto Start OFF)         (Auto Start ON)     

<Dual Digit Input> 

 

 E.g. Cook with Memory 2  

 

 

 

 

<Single Digit Input>   

 

 

 

 E.g. Cook with Memory 2  

 

 

 

<Repeat Digit Input> 
 E.g. Cook with Memory 12  
<Cooking double/triple quantity with Memory> 
 E.g. Cook 2 servings with memory 2 (Repeat Digit input.)  
 E.g. Cook 3 servings with memory 2 (Single Digit input.)  
<Express Defrost with Memory> 
 E.g. Cook with memory 0 (Dual Digit Input.) 

  Dual Digit Input     Single Digit Input    Repeat Digit Input 

 
 
2. Selecting Auto Start Operation 
 

   Auto Start OFF         Auto Start ON 

 
 
3. Program Lock Setting 
 

        Lock OFF                 Lock ON      

 
 
4. Audible Signal Sound Volume Setting 
 

            High                     Medium 

                Mute 

 

 

 

     1 long beep      Repeat long beeps       4 short beeps     Repeat short beeps 

 
 
6. Memory Check: Use this function to check the programming for a certain memory. 
    

e.g. Memory 7 (Dual Digit Input.) 

 
 
7. Counter Check/Clear: Shows how many times each pad has been used, or reset the count to 0. 
                                      Total Usage      Memory (e.g.#6)    Manual Cooking   Express Defrost                                Reset 
 
 

*Regardless of Input Method selected, use Dual Digit Input Method to input memory number. 
8. Air Intake Filter Counter:  Shows how many hours the filter has been used, reset the count to 0, or change cleaning cycle. 
                         

Check 

Total count      Reset count   

 
 
     

 

 
 

*Factory setting for Cleaning cycle is 100 hours and can be changed to 1- 999 hours. 
9. Selecting Operation in case of Magnetron Failure 
                                     Stop operation    Allow operation of single magnetron 
 
 

10. Multiplication Factors for Double/Triple Quantity 
  

        Check multiplication    

             Set multiplication     

     

(e.g. double quantity memory 6)    (e.g. double quantity, memory 6 to 2.00) 

 
 

* 

Regardless of Input Method selected, use the Dual Digit Input Method to input memory number. 

**   Press the x2/x3 pad once for 2 servings, twice for 3 servings to check or set multiplication. 
***Factory settings are 1.80 for Double Qty. and 2.60 for Triple Qty. 
11. Express Defrost Setting 

Press CUSTOM SETTING pad twice within 2 seconds, and press number pads or desired pad to select options. Press the 
STOP/CLEAR pad to exit from the Custom Setting. 
*You will hear an audible signal the second time the CUSTOM SETTING pad is pressed to indicate that you have entered 
Custom Setting. 

+ 

or 

2 

1 

1 

1 

3 

1 

+ 

1 

3 

2 

3 

+ 

or 

+ 

 

1 

4 

2 

4 

+ 

or 

3 

4 

+ 

1 

2 

2 

2 

+ 

or 

+ 

1 

5 

2 

5 

+ 

or 

3 

5 

6 

7 

0 

+ + 

+ 

1 

9 

2 

9 

+ 

or 

+ 

4 

5 

+ 

7 

6 

0 

+ + 

or 

or 

+ 

or 

or or 

 

2 

8 

2 

8 

or 

+ 

5 

1 

0 

or 

or 

Check 

Cleaning cycle  Change cleaning cycle (e.g. 150 hours) 

or 

+ 

+ 

6 

0 

x2/x3 

0 

2 

6 

0 

x2/x3 

0 

2 

5 

→ 

→ 

Pause Timing             PL3 

A1                 B1             PL1            A2                 B2            PL2  

2 

3 

1 

3 

3 

0 

2 

4 

*Factory settings are A1=0.2 B1=20sec. PL1=40%, A2=0.13 B2=30sec. PL2=30%, Pause Timing=50% PL3=20%. 

+ 

Midway through the defrosting cycle, the CHECK indicator will light in the display and an audible 
signal will be heard unless signal volume has been set to Mute. You may open the door, turn food 
over and shield any warm portions.  Close the door and press the START pad to continue defrosting. 

 

3 

3 

0 

1 

8 

1 

8 

or 

+ 

0 

3 

0 

3 

3 

0 

6 

0 

1 

0 

0 

2 

0 

7 

3 

2 

0 

<Saving Time and Power level> 
Press the SET MEMORY pad twice within 2 seconds. 
Refer to HELPFUL TIPS 2 to enter memory numbers. 
 E.g. Set 1 minute at 70% power with memory 12 (Dual Digit Input.) 
 
 
 
*When memory is set in succession, repeat step ② to step ⑤ and the last step ⑥. Refer to Dual Digit Input in Operation Manual page EN-19.  
**Refer to <Single Stage Cooking> * and <Multi-Stage cooking> *~ **** in MANUAL COOKING. 
<Saving Express Defrost> 
 E.g. Set 30 minutes with memory 2. 

SAVING MEMORY 

3  0  0  0 

2 

1  2 

1  0  0 

7 

step ①     step ②         step ③        step ④   step ⑤  step ⑥ 

Check sequence:  The Express Defrost setting of each phase is shown until being pressed the MANUAL/REPEAT pad.   
 

 (STAGE1→ A1→   B1→ PL1→ STAGE2 → A2 → B2 → PL2 → STAGE 3  →Pause Timing  

 

→ PL3 is displayed.)  

Set sequence (A1=0.20 B1=20sec. PL1=40%, A2=0.13 B2=30sec. PL2=30%, Pause Timing=50%, PL3=20%) 
 

Re-cook in the previous manual cooking setting. 

E.g. 1 minute at 70% power for 1st stage and then continue to cook for 2 minutes at 50% power for 2nd stage. 

REPEAT COOKING 

 

Printed in Thailand 
TCADRA031WRRZ-K81 

 

HEPLFUL TIP 1 
When Auto Start ON has been selected, 
1. “0” should be displayed before entering memory number. 
     When “0” is not displayed, open the door and close to reset. 
2. The START pad does not need to be pressed. 
    Cooking will automatically start when the memory number is input. 
 
HELPFUL TIPS 2  
The Memory Input Method determines how to input memory numbers for Memory Cooking, Custom Setting and Saving Memories.   
Follow the notes below, and refer to HELPFUL TIPS and Memory cooking sections for details. 
1. Dual Digit Input: Must input two numbers to select a memory, even though the first number is 0. Memory programming is limited to 0-99 to  
  select a memory. 
2. Single Digit Input: Can only input one number to select a memory.  
  Memory programming is limited to 0-9 to select a memory. 
3. Repeat Digit Input: Input one, two, or three numbers to select a  memory.  
  Memory programming is limited to 0-29 to select a memory. 
4. Only when Repeat Digit Input/Auto Start ON, push number pads within  
  one second of the previous number. 
5. Regardless of input Method selected, Counter Check/Clear (Custom Setting 7) and Multiplication Factor for Double/Triple Quantity  
  (Custom Setting 10) use Dual Digit Input Method to input memory number. 

Memory 
Input Method 

Dual Digital Input 
Single Digital Input 
Repeat Digital Input 

Memory No 
   Examples 

 0 

2 

12 

22 

 
 

  0, 0 

0, 2 

1, 2 

2, 2 

 0 

2 

 

  0 

2 

2, 2 

2, 2, 2 

5. STOP/CLEAR pad 
  Press to stop oven operation, clear programming or exit from  
  Custom Setting Function. 
6. START pad 
  Press to start oven or set programs. 
7. Ten number pads 
  Press to enter times or memory numbers. 
8. EXPRESS DEFROST pad 
  Press to use Express Defrost function. 
9. SET MEMORY pad 
  Press to set memory programming. 

1. MANUAL/REPEAT pad 
  Press to enter cooking times, re-cook in the previous manual  
  cooking setting, change Express Defrost Factors, change   
  Multiplication Factors for double/triple quantity, change the  
  Air Intake Filter cleaning cycle, check Total manual cooking  
  usage, or move to next stage.  
2. POWER LEVEL pad 
  Press to enter power level. 
3. DOUBLE/TRIPLE QUANTITY pad 
  Press to cook double/triple quantities in Memory Cooking or 
  check/change the Multiplication Factor for each memory. 
4. CUSTOM SETTING pad 
  Press to check/change settings or counters. 

1

2

3

4

5

6

7

8

9

5

6