Sharp VENTA PRO V3 (serv.man30) Driver / Update ▷ View online
220
When overtendering on a payment set as change occasionally the transaction
would not treat the overtender amount as change, now fixed
would not treat the overtender amount as change, now fixed
219
Refund display stayed on after selling refund item. It was not active however
unless next item was a child item
unless next item was a child item
218
When using the 86 feature, when it reaches zero it displays zero, but if you logoff
and then go back to that product it doesn‟t show any indication that there are
none left. Now fixed
and then go back to that product it doesn‟t show any indication that there are
none left. Now fixed
217
When refunding via post to room the .POS file was in correct, now fixed.
216
Manual-entry markdowns were disappearing from cash reports, now fixed
215
Hanging on Alt-F10 Exit, now fixed
26/03/10
Venta Pro V3.1.895 VPM V1.2.193
214
Feature Added
It is now possible to turn off the Fixed Exit key at the bottom of the all the screens
/ bottom function bar
Two new control functions can be used within a macro C60 (Turns the fixed exit
key off) and C61 (turns exit on) a use for this is as part of an open table/KP hold
macro detailed below
Table# and KP Hold C60 F2 C70
KP Go and Exit F71 C61 C10
/ bottom function bar
Two new control functions can be used within a macro C60 (Turns the fixed exit
key off) and C61 (turns exit on) a use for this is as part of an open table/KP hold
macro detailed below
Table# and KP Hold C60 F2 C70
KP Go and Exit F71 C61 C10
213
Fixed File folder browsing within VPM
– Systems Configuration – Fixed file
export caused application error, now fixed
212
PLU Search by description cause order printing to be stopped, now fixed
211
Product Search by description had problems with embedded apostrophes, now
fixed
fixed
11/02/10
Venta Pro V3.1.885 VPM V1.2.191
210
Venta Pro V3 now supports multiple displays, e.g. on the 9900 the inbuilt display
(no printer config is needed) and an external POSLIGNE OCD 100 Usb display
'OCD-100' (printer config).
(no printer config is needed) and an external POSLIGNE OCD 100 Usb display
'OCD-100' (printer config).
209
Feature Added
For Guestline Reslynx integration Subtotal Discounts are now calculated by item
allowing the .POS file to show the discount that has been applied to each item.
In VPM
For Guestline Reslynx integration Subtotal Discounts are now calculated by item
allowing the .POS file to show the discount that has been applied to each item.
In VPM
– External Interfaces CashRSP v9 and also Hotel(STD)vers=6 are
required.
To activate this special mode, use s2001.ini setting on each machine.
PROMOCALCBYITEM=1
The following setting works for discounts and surcharges; if you want discounts
only use the setting above.
PROMOCALCBYITEMDISCOUNT=1
PROMOCALCBYITEM=1
The following setting works for discounts and surcharges; if you want discounts
only use the setting above.
PROMOCALCBYITEMDISCOUNT=1
208
Feature Added
Micros. If 'Include Tax' not selected, it is now possible to use tax fields 1-4 for
sales totals groups 5-8
sales totals groups 5-8
207
Feature Added
It is now possible to print the graphical logo footer on the Bill if the logo2= 1c 70 2
0 is placed in the receipt printer section of the printer.def
It is now possible to print the graphical logo footer on the Bill if the logo2= 1c 70 2
0 is placed in the receipt printer section of the printer.def
206
When cancelling a credit card payment an authority prompt is displayed, if a
swipe card containing details of a server with the correct authority is swiped, it
does not do anything. If the server and password are entered manually it works
fine. Now fixed
swipe card containing details of a server with the correct authority is swiped, it
does not do anything. If the server and password are entered manually it works
fine. Now fixed
205
With 3 offer groups and 2 mix and match promotions. Both the mix and match
promotions are set to selling price by plu.
The promotions will work fine, the problem is that in VPM they both show the
same PLU within the Mix and Match Action, now fixed
promotions are set to selling price by plu.
The promotions will work fine, the problem is that in VPM they both show the
same PLU within the Mix and Match Action, now fixed
204
A transaction in Pay State on till could be opened from another till. Now fixed
203
This version will now allow a server timeout in the payment screen - provided no
part payments have been entered.
part payments have been entered.
202
When pressing Exit in the payment screen, after a part payment used to just
reverse the payment and exit. You now have to confirm this is what you want to
do.
reverse the payment and exit. You now have to confirm this is what you want to
do.
15/10/09
Venta Pro V3.1.866 VPM V1.2.189
201
Feature Added
To allow CASHRSP items with 0 price to be included in the cashrsp the new
setting can be added to the s2001.ini file
CASHRSPONZEROPRICE=1
To allow CASHRSP items with 0 price to be included in the cashrsp the new
setting can be added to the s2001.ini file
CASHRSPONZEROPRICE=1
200
Improvements within the communication process when eft files are being
deleted. Using Yespay and Commidea Ocius
deleted. Using Yespay and Commidea Ocius
199
If you Open table 1 from the active tables list on the handheld and then select the
manual status change 'Main Course' then send the order it changes the table
status to main course on both the till and the handheld. If you log off the hand
held and back on the table status on both HHT and Till changes back to unused.
Now fixed
manual status change 'Main Course' then send the order it changes the table
status to main course on both the till and the handheld. If you log off the hand
held and back on the table status on both HHT and Till changes back to unused.
Now fixed
198
When manually changing the status of a table on the handheld it says no product
is associated with PLU 100000003. Now fixed
is associated with PLU 100000003. Now fixed
197
When using Priority kitchen printing the follow-on items were not being shown as
priority items on the KP. Fixed
priority items on the KP. Fixed
196
When performing a mix and match promotion „cheapest item free‟ an extra free
item is shown on the screen to denote that an item has been deducted, but this
item was also being sent through to the cashrsp file and affecting the stock.
Fixed
item is shown on the screen to denote that an item has been deducted, but this
item was also being sent through to the cashrsp file and affecting the stock.
Fixed
195
When converting an old S98 program the Preset PLUs in S98 were not being
converted to PLU nos. in Data Transfer Wizard. fixed
converted to PLU nos. in Data Transfer Wizard. fixed
194
If a sale of a single item was split by 3, and it's the only item in a dept,
when totalled the quantity becomes incorrect on the Dept report. Fixed
when totalled the quantity becomes incorrect on the Dept report. Fixed
193
Micros - part payments with non-hotel payments were always sending the full
sales total as amount. Now fixed
sales total as amount. Now fixed
192
The authority level set against Function 40 is now used to control the following
popup message. 'This transaction has a payment pending do you want to
continue'
popup message. 'This transaction has a payment pending do you want to
continue'
191
When paying for interval drinks using EFT Ocius the tickets are not printed. Fixed
190
When using the Slip printer for Receipts. If Printing or viewing transaction‟s from
within the transaction history no information was being displayed or printed. Now
fixed
within the transaction history no information was being displayed or printed. Now
fixed
22/07/09
Venta Pro V3.1.841 VPM V1.2.189
180
Close Session „EFT Log‟ reports now available. New setting USEEFTLOG=1
must be added to the S2001.ini file on all tills. If the setting EFTOCIUSWAIT=1 is
used then the EFT Logs are not available for printing at Close Session.
must be added to the S2001.ini file on all tills. If the setting EFTOCIUSWAIT=1 is
used then the EFT Logs are not available for printing at Close Session.
179
If an item has been Voided that has already been sent to the KP, everytime the
table is opened a VOID is printed out in the Kitchen. Now fixed
table is opened a VOID is printed out in the Kitchen. Now fixed
178
Condiments: a 'to follow' item when replacing during dummy dessert feature a
product set as „Extra‟ was being ignored.
product set as „Extra‟ was being ignored.
177
EFT completions were not posting cash postings to Innsite/Micros. Fixed
176
In KP consolidation, follow-on items were not being kept with their parent. Fixed
175
When a transaction is finalised on a till the revenue was being assigned to the till
were the table was opened. Now fixed. The revenue is now assigned to the till
were the transaction is paid off.
were the table was opened. Now fixed. The revenue is now assigned to the till
were the transaction is paid off.
04/03/09
Venta Pro V3.1.812 VPM V1.2.189
174
Features Added
Receipt reprint from logged off screen
Allows a receipt for the last transaction performed on the till to be printed
Recalculation of subtotal promotion after previous item voids
After voiding an item after a subtotal promotion has been applied the subtotal
amount is now adjusted accordingly.
amount is now adjusted accordingly.
Hotcard file for Loyalty cards
It is now possible to disable a loyalty card or cards from being used within venta pro
by using a simple text file.
by using a simple text file.
Product Discountable „Flag‟ Override
It is now possible to apply a promotion to any product even if the product
discountable flag is not set.
discountable flag is not set.
Table access security
When opening and closing tables with ‘Auto table release’ set in VPM – Till
configuration Options. There is no record of the last server to open and add any
items to a table.
configuration Options. There is no record of the last server to open and add any
items to a table.
To overcome this the ‘Open tables’ report within Venta Main Menu –
Reports has now been enhanced to show the last Server to add items to a table.
173
Occasionally the top left button of a list would go black the button will return to
normal after re-entry to that list. Now Fixed
normal after re-entry to that list. Now Fixed
172
When taking a time and attendance report that contained more than 200 entries
the following message was displayed "To many registrations > 200 for this
server". Venta Pro has now been changed to show upto 1000 entries
the following message was displayed "To many registrations > 200 for this
server". Venta Pro has now been changed to show upto 1000 entries
171
Using the Innsite interface Venta Pro has been changed to show the posting
information from were the transaction is finalised. This is now the same as all
previous versions of Venta Pro and Venta / Dos
information from were the transaction is finalised. This is now the same as all
previous versions of Venta Pro and Venta / Dos
170
Printer Spooler hanging on slip prints. After 32767 spool records. Now Fixed
169
Server Sales report now shows correct sales figures when using a payment
method other than cash payment method 1.
method other than cash payment method 1.
168
When cash payments other than payment method number 1 are being used as
cash, after overtendering the overtender amount is no longer treated as (cash
given in change) it is just treated as normal change.
New payment method type option „Other‟ introduced. If using a payment method
other than payment method 1 to give the overtender amount as (Cash Given in
Change) ie for Credit card cashback. The „Other‟ option must be used.
cash, after overtendering the overtender amount is no longer treated as (cash
given in change) it is just treated as normal change.
New payment method type option „Other‟ introduced. If using a payment method
other than payment method 1 to give the overtender amount as (Cash Given in
Change) ie for Credit card cashback. The „Other‟ option must be used.
167
When setting products within VPM to be „Follow on product‟ occasionally allowed
order printers be configured, now it is not possible to edit the order printers for a
product set as „Follow On‟
order printers be configured, now it is not possible to edit the order printers for a
product set as „Follow On‟
166
When using the KPACCUTOTALQTY=1 and the NEWKP=3 Venta Pro could
close intermittently. Now fixed
close intermittently. Now fixed
Venta Pro V3.1.760 VPM V1.2.186
165
The following error 'Error 70 on 50 Tranmove 7.0' where 7.0 is the table number
that you are transferring to,
if you perform the following
Open table 1
Add Items
Then layaway
Split the table 2 ways
Then open the table from ADT (Even though it shows as unused)
When the split selection screen appears select 'Cancel'
You are left in the Bar screen
Add new items
now try and transfer these items to a table that is empty
select yes to to transfer the table
then the error message appears
Now fixed
that you are transferring to,
if you perform the following
Open table 1
Add Items
Then layaway
Split the table 2 ways
Then open the table from ADT (Even though it shows as unused)
When the split selection screen appears select 'Cancel'
You are left in the Bar screen
Add new items
now try and transfer these items to a table that is empty
select yes to to transfer the table
then the error message appears
Now fixed
164
After a bill split the Active table Display on the will now show the table as in use,
previously the active table display showed a table containing a split as unused.
previously the active table display showed a table containing a split as unused.
163
Slip Spooler causes Venta Pro to lockup after 30000+ spool jobs. Now fixed
03/12/08
162
Features Added
Active Server Display
Non-Add Department
Click on the first or last page to see other VENTA PRO V3 (serv.man30) service manuals if exist.