DOWNLOAD Sharp UP-X200 (serv.man9) Service Manual ↓ Size: 1.01 MB | Pages: 49 in PDF or view online for FREE

Model
UP-X200 (serv.man9)
Pages
49
Size
1.01 MB
Type
PDF
Document
Service Manual
Brand
Device
EPOS / Service Manual
File
up-x200-sm9.pdf
Date

Sharp UP-X200 (serv.man9) Service Manual ▷ View online

CODE : 00Z
q
SERVICE MANUAL
CONTENTS
Parts marked with "
!
" are important for maintaining the safety of the set. Be sure to replace these parts with the
specified replacement parts for maintaining the safety and performance of the set.
SHARP CORPORATION
UPX200/SME
Mobile Terminal
MODEL
UP-X200
Cradle charger
: UP-B01CH
Battery Charger
: UP-P01CH
Rechargeable battery: EA-BL08
CHAPTER 1. SPECIFICATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
CHAPTER 2. OUTLINE OF HARDWARE  . . . . . . . . . . . . . . . . . . . . . 2
CHAPTER 3. BOOT LOADER  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
CHAPTER 4. WINDOWS CE IMAGE . . . . . . . . . . . . . . . . . . . . . . . . . 5
CHAPTER 5. POWER MANAGEMENT  . . . . . . . . . . . . . . . . . . . . . . . 6
CHAPTER 6. REFERENCE DOCUMENTS  . . . . . . . . . . . . . . . . . . . . 7
CHAPTER 7. SYSTEM BLOCK DIAGRAM. . . . . . . . . . . . . . . . . . . . . 8
CHAPTER 8. I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
CHAPTER 9. KEY MATRIX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
CHAPTER 10. DIAGNOSTIC PROGRAM  . . . . . . . . . . . . . . . . . . . . . 17 
CHAPTER 11. DISASSEMBLY AND REASSENBLY   . . . . . . . . . . . . 28
CHAPTER 12. CIRCUIT DIAGRAM AND PWB LAYOUT. . . . . . . . . . 30
CHAPTER 13. CHARGING THE BATTERY
(RELATED OPTIONS)  . . . . . . . . . . . . . . . . . . . . . . . . 47
UP-X200
"BATTERY DISPOSAL"
CONTAINS LITHIUM-ION BATTERY AND MUST BE DISPOSED OF PROPERLY.
REMOVE THE BATTERY FROM THE PRODUCT AND CONTACT 
FEDERAL OR STATE ENVIRONMENTAL AGENCIES FOR INFORMATION 
ON RECYCLING AND DISPOSAL OPTIONS.
Caution : Danger of explosion if battery is incorrenctly replaced. Replace only with the 
same or equivalent type recommended by the manufacturer. Discard used batteries 
according to the manufacturer's instructions.
Attention  : Il y a danger d'explosion s'il y a remplacement incorrect de la batterie. 
Remplacer uniquement avec une batterie du même type ou d'un type recommandé par 
le constructeur. Mettre au rébut les batteries usagées conformément aux instructions du 
fabricant.
Caution about Battery
UP-X200
SPECIFICATION
– 1 –
CHAPTER 1. SPECIFICATION
1-1. PHYSICAL CHARACTERISTICS
1-2. SPECIFICATIONS
MOBILE TERMINAL UP-X200
*
Specifications and appearance subject to change without notice.
CRADLE CHARGER UP-B01CH
BATTERY CHARGER UP-P01CH
1-3. SOFTWARE
1-4. OPTIONS
 Front view
USB 1.1 port
(provides a connection
 with external
 peripherals.)
Display
(touch panel)
Power on/off key
Numeric keys
(0 - 9)
Enter key
Cursor keys
(right/left/up/
down arrow)
Side trigger key
Center trigger key
Clear key
Decimal point key
Earphone/
microphone jack
Buzzer
Charge indicator
Wireless LAN Card
 Rear view
Lock for the battery
compartment lid
Battery compartment lid
Microphone
Speaker
Stylus
RESET Switch
DO NOT insert any objects 
unless instructed to do.
Depression of the RESET
Switch may damage or
delete data.
Eyelets for connecting a strap
Dimensions
Approximately 77 (W) x 187 (D) x 25 (H) mm
Approximately 3.0 (W) x 7.4 (D) x 0.98 (H) in.
Weight
Approximately 340 g / 12.0 oz.
Power source
Operating battery: "EA-BL08" 3.7 V (DC) lithium-ion  batteries 
Memory back-up battery: 3.0 V (DC) (Built-in)
Power consumption
Operating: 2.6 W
Battery life
Approximately 9 hours
When you operate at a 1 transaction per minute interval.
A Transaction is defined as 5 item registration, 
finalization and data transmission.
Working
temperature
5 to 35 °C/41 to 95 °F
Display
4" Semi-transparent CGS color LCD with backlighting
480 x 640/240 x 320 dots (selectable)
Accessories
Rechargeable battery (EA-BL08) (2 pieces)
Stylus (inserted in the mobile terminal)
Wrist strap (1 piece)
Hardware operation manual (1 copy)
Dimensions
Approximately 83 (W) x 106 (D) x 106 (H) mm
Approximately 3.3 (W) x 4.2 (D) x 4.2 (H) in.
Weight
Approximately 157 g/5.5 oz.
Dimensions
Approximately 65 (W) x 80 (D) x 26.5 (H) mm
Approximately 2.6 (W) x 3.1 (D) x 1.0 (H) in.
Weight
Approximately 75 g/2.6 oz.
Item
Specification
Note
O/S
Provision
Windows CE.NET 4.2
Device
Drivers
POS drivers
Touch keyboard, 
USB memory,
Wireless LAN card, ten key 
pad,SD memory card etc.
provided by SHARP
Keyboard 
driver
USB keyboard
(US, UK, Germany, 
French,Spanish)
provided by SHARP
Additional   
device driver
Local purchased
System
software
Provisions
Internet Explorer 6.0
Java script 5.5
Word
CAB file installer
Software keyboard
.NETCompactFrameWork
Application
Mobile POS for Hospitality Provided separately
Item
Model Name
Specification
Battery charger
UP-B01CH
Cradle type battery charger
UP-P01CH
Battery charger for Rechargeable battery
Battery
EA-BL08 Rechargeable 
battery
Memory device
Local purchase
USB or SD memory
Key board
Local purchase
USB type (US, UK, Germany, French,Spanish)
Access point
Local purchase
IEEE802.11b
Recommendation: Symbol Technologies
UP-X200
Outline of Hardware
– 2 –
CHAPTER 2. OUTLINE OF HARDWARE
1-1. DEVICE CONFIGURATION
MAIN DEVICE
1-2. MEMORY MAP
Classification
Type
Model
Maker
Quantity
Remarks
Main System
CPU
PXA255
Intel
1
The device is a 400MHz product
SDRAM
HYB25L512160AC
INFINEON
2
Flash Memory
DiskOnChip
M-Systems
1
32-bit bus width
LH28F640BFHE
SHARP
1
16-bit bus width
RTC
RV5C348A
Ricoh
1
CF Buffer IC
S1L50752F26B
EPSON
1
Touch Panel Controller
WM9712L
WOLFSON
1
AC97 connection
Audio
Video System
LCDC
TC6393XB
Toshiba
1
LCD Unit
LS040V7D
SHARP
1
Timing Controller
TC200G04XB-0024 (Z)
SHARP (Toshiba)
1
Back Light Adjuster
M62332FP
Mitsubishi
1
12C connection
Liquid Crystal Display
Adjustment
I/O
CF Card Slot
Type
II
 x 1
1
S1L50752F26B is used as the Buffer IC
(For the built-in SS wireless LAN card only)
SD Card 
SDIO compatible X 1
1
CPU IF used.
Serial Port
Internal FUART
For debugging (Not used in the product)
Internal BUART
Not used.
Internal SUART
Not used.
USB
TC6393XB
Toshiba
1
LED
GPIO connection
3
2 LEDs are connected to GPIO (one of the LEDs is a red/
green two-color type) are soft controlled
Others
Main Battery
Two 3.7V 1700mA batteries can be installed.
Auxiliary Battery
For RTC backup (6 months)
For RAM backup (10 minutes)
Address Range
Resource Size
Application (Size: width)
Remarks
B000,0000-FFFF,FFFF
Reserved 1280MByte
-
AC00,0000-AFFF,FFFF
SDRAM bank3 64MByte
-
A800,0000-ABFF,FFFF
SDRAM bank2 64MByte
-
A400,0000-A7FF,FFFF
SDRAM bank1 64MByte
SDRAM (128MByte: 32bits wide)
A000,0000-A3FF,FFFF
SDRAM bank0 64MByte
4C00,0000-9FFF,FFFF
Reserved 1344MByte
-
4800,0000-4BFF,FFFF
Memory Mapped registers (Memory Control)
Internal
4400,0000-47FF,FFFF
Memory Mapped registers (LCD)
Internal
4000,0000-43FF,FFFF
Memory Mapped registers (Peripherals)
Internal
3000,0000-3FFF,FFFF
PCMCIA/CF Slot1
-
2000,0000-2FFF,FFFF
PCMCIA/CF Slot0
CF card
1800,0000-1FFF,FFFF
Reserved 128MByte
-
1400,0000-17FF,FFFF
CS5 64MByte
G/A for CF card I/F
1000,0000-13FF,FFFF
CS4 64MByte
LDCD & USB HOST
0C00,0000-0FFF,FFFF
CS3 64MByte
Application Flash Rom DiskOnChip (64MByte:16bits wide)
0800,0000-0BFF,FFFF
CS2 64MByte
G/A for I/O
0400,0000-07FF,FFFF
CS1 64MByte
-
0000,0000-03FF,FFFF
CS0 64MByte
Boot FlashROM (1Mbyte:16bits wide)
Page of 49
Display

Sharp UP-X200 (serv.man9) Service Manual ▷ Download

  • DOWNLOAD Sharp UP-X200 (serv.man9) Service Manual ↓ Size: 1.01 MB | Pages: 49 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sharp UP-X200 (serv.man9) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp UP-X200 (serv.man9) EPOS. Information contained in Sharp UP-X200 (serv.man9) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.