DOWNLOAD Sharp UP-X200 (serv.man26) Service Manual ↓ Size: 24.35 KB | Pages: 4 in PDF or view online for FREE

Model
UP-X200 (serv.man26)
Pages
4 Few pages! See other manuals at the bottom of the first or last page.
Size
24.35 KB
Type
PDF
Document
Driver / Update
Brand
Device
EPOS / X300 X200 Revision History upto Version 1.5.0.4 and X200 version 1.1.0.2(details enhancements and resolved issues)
File
up-x200-sm26.pdf
Date

Sharp UP-X200 (serv.man26) Driver / Update ▷ View online

UP-X 300/200 Version History                           
Version
Specification/Resolved Issue
X300 
V1.5.0.4  
X200 
V1.1.0.2
[Compatibility]
The data is not compatible with any previous version.
Please make a CSV backup of your previous data. Convert the CSV data by the “CSV 
convert tool” on a PC and then “Restore” the new CSV file to your terminal or system. 
(Please refer to separate documentation see EPOS TECH WEB) 
   
Do not install the new Version with “keep current data” or copy and paste CDB file from 
any older version. 
[OS versions]
The following OS versions should be used. If not already updated please do so at this 
timing:
  
UP-X200 OS version 1.23
UP-X300 OS version 1.07
The following items 1 to 6 are specification changes or additions 
1. The reporting of UP-X300 is improved :
a) B.O. reports and F.E. reports are accessible via F.E. macro keys
b) Programming of report issue/not issue for EOD (EOS) is improved.                                     
(At B.O./ Report format/End of Day/End of Period the setting of: "Issue/Not issue“ is 
highlighted and is therefore directly visible).
c) By the X300_Mainwindow.ini file the access for EOD at F.E. can be limited to only  Daily, or 
remain selectable  (as previous version) 
d) The PLU report only reports the price levels which are actually used.Zero skip (if preset) is 
applied to each individual PLU price level.
2. Improvement of price level specification is realized :
a) Selection of price level shift is valid per item/ per transaction or stay down. 
b) Price level selection by clerk. 
c) Default Price level by room
d) Default Price level selection by terminal.
3. Improvements of printer related issues:
a) Manually activate/de-activate alternative printers.
b) Possibility to delete stored error printing job (Administrator password)
For this entry the Administrator password must be changed to numeric code.(Currently as 
default it is changed to: 12345678 )
c) New additional KP assignment are realized:
   KP device assignment valid for a room
   KP device assignment valid for a terminal
4. The Customer file specification are enhanced :
a) The transfer of table data to the Customer file is realised.
(Also individual items can be transferred by the BS function).
b) For charge payments each VAT totalizer is stored in the customer file.
c) Print a complete customer’s bill via the F.E. application software. 
d) Customers Bills for a range of customer can also be issued.
5. Condiment PLU tables can be assigned to a Price level:
For each Condiment table a price level can be assigned, which is applied to all linked 
6. The width of “scroll bar’s” at UP-X300 can be changed:
By “X300_StartUPMain2.ini” file setting it is now possible to change the width of the scroll bar. 
Caution: Above change is only effective after the terminal is twice rebooted.
The changed width is applied to the registration window; BS screen; all pop up screens and to 
all BackOffice screens with scroll bars. 
The following items 7 to 12 are resolved issues:
7. Previously the “Taxable amount totalizer” was not updated in case a transaction was 
automatically finalized by removal of a Clerk key.
 
8. In case the “PLU Auto delete function” was executed at EOD it was previously still possible 
to register the deleted PLU at the Terminal (Front End application)
9. Send Print data was previously lost under the condition that the paper near-end check was 
set as "Yes" and the printer was switched off.
  
10. Modem connection was at the previous versions only working correctly at the UP-X300 
COM port 1. Now it works correctly  at all COM ports.
11. The initialization of a connected modem was previously not correctly performed. With 
Online activated at COM 2 or 3 a part of the initialisation command was still send to COM1.  In 
case a printer was connected to COM1 this sometimes resulted in a print of strange character.
12. The ATCOM.INI can now be modified via the BackOffice programming:
/POS Device programming/ Device programming / Online
Ensure the X300 OS is V1.07 and X200 OS is 1.23
Version 1.4.11.1 is compatable with 1.4.7.0 and above, please do not select "keep 
current data" if upgrading from a version older than 1.4.7.0, also do not copy and paste 
PRESET folder from versions older than 1.4.7.0
The following items 1 to 4 are specification changes or additions 
1. Employee Calculation Report has been added                                                     
Please note the report is only shown in B/O
2. Auto Shutdown and Reboot after EOD                                                       Dependent 
upon the setting within the configuration file the Terminal can be set to automatically 
shutdown and reboot after Manual EOD or Timed EOD is carried out, V1.4.11.1 is set to 
shutdown after manual EOD (added reliability/performance)  
3. Reboot button is added to the "Memory Warning" message screens
4. Partition Dismount at Manual Shutdown                                                             
Dependent upon the setting within the configuration file the HD2 partition will be dismounted 
at time of manual shutdown, to access HD2 at this point tap the screen 20 times. (added 
reliability/performance)
The following items 5 to 16 are resolved problems 
5. In case of bad wireless conditions buffered print jobs of x200 have often been issued twice, 
the message << reprint >> is now printed at top of receipts.
X300 
V1.4.11.1  
X200 
V1.0.10.0
6. Long time to recover from suspend mode has been reduced.
7. Under certain conditions (2 past voids after expand feature causes windows CE or froze 
error) resolved.
8. Sort groups now correctly printed.
9. After editing manually the GT3 at B/O the calculation for GT1 is now correct.
10. BS is now working correctly with zero priced condiments linked to PLU with prices 
11. Leading PLU and their linked PLU's are now printed at KP even when they assigned to 
different sort groups 
12. Auto table feature is now working correctly, when the Recall feature is carried out  
between Auto Table selection
13. Illegal characters no longer appear in the payment print line in cases where under bar (_) 
character in bold are used for descriptions
14. Deposits for customers are now stored in the customer file and therfore deposit refund 
can be carried out
15. In case the following two conditions are met the EOD was not correctly performed:- 1. 
The EOD report included the Clerk (Individual) and the Clerk report was set to issue all PLU   
2. EOD was executed more than two times without performing a "shutdown)
16. The length of a manually entered Backup/Restore filename is now limeted to the entry of 
13 characters maximum
[Compatibility]
Only the CSV data is compatible with that of previous versions.
Do not install the new Version with “keep current data” or copy and paste existing 
"PRESET FOLDER" from older versions to the new release version 1.4.7.0. 
Please use the Back Office/Data control function a “Backup” of the current CSV 
Data and “Restore” it after the installation of the OS and the application software. 
This procedure is necessary due to some changes of the memory management of 
the new OS version.
[OS versions]
UP-X200 should be updated to OS version 1.23
UP-X300 should be updated to OS version 1.07
[Software version]
After OS update use only UP-X300 V1.4.7.0 or higher, in combination with UP-X200 
version 1.0.6.0 or higher.
1.4.7.0
At an overlapped Clerk operation it possible again to void the first entered PLU.
It was previously not possible to operate  PLU/SUB and PLU name function in certain locally 
realised screen ( UK / Retail screen number 11)
The modifier and PLU search function is now working again, even so there is no “Item Key 
Area” in the screen of UP-X300
1.4.6.2
At the previous version, item count down function (86item function)  did not work in case the 
following programming was set as "No":
POS Programming / Function / Waste / Waste stock adjustment
Now the Count down (86item function) function works, regardless of the above setting.
KP printing stopped in case several KP printers were connected to one UPX300  and print data 
was send for each KP at the same timing.
In previous versions it was possible to change IP address of a terminal without performing 
MRS example change IP then select memory Initialise caused error.
The registration screen could go blank if items were registered and the next key pressed was 
CANCEL. This bug has been corrected.
1.4.0.0
After EOD error (Open Check exist) if the operator chooses “Force to execute End Of Day” the 
terminal sales data is not cleared. The Sales data is now cleared.
F.E Application Version number report can be issued
Rare bug in Later Dessert function after condiment entry sequence, is now fixed.
At ST Void the KP now indicate they are Void receipts.
Counting up of the Consecutive Number when Training Clerk is used.
Clerk “Sign Off” did not work at FINAL-key entry
Back up server print tasks sometimes stopped under condition of continue to operate with EJ 
or T-Log full
After the entry sequence of a condiment PLU the item area screen returns to the default 
registration screen. This can now be set in X300_MainWindow.ini
Set switch as '1' = After the entry sequence of a condiment PLU, screen returns to the last 
selected menu.
Set switch as '0' = After the entry sequence of a condiment PLU, screen returns to the default 
registration screen.
1.4.4.0
In BO send Message to clerk 1 is defined which includes for example 80 characters and save 
it. After restore, only the first 26 characters of the message will be displayed. Now modified.
 In case only time zone 1/2/5 are used (Time zone 3 and 4 are deleted) and the Item report ( 
PLU all item report) is included (issued) at EOD, the zero turnover of time zone3 and 4 are still 
reported. Now modified.
Illegal split number occurs at B.S. with Split Number entry and Remerge operation. 
Parameter setting under payment functions Charge/Credit
The parameter for "footer message on bill Yes/No" will not change to No after it has been 
previously set to Yes.  Now modified.
 At the EOD report programming, the display of quantity settings in filter programming is 
wrong. Now modified.
 When the Key area property of the item key area is set for "Key Type" page change method, 
some keys are not displayed on the item key area when menu key is used. Now modified.
Display

Sharp UP-X200 (serv.man26) Driver / Update ▷ Download

  • DOWNLOAD Sharp UP-X200 (serv.man26) Service Manual ↓ Size: 24.35 KB | Pages: 4 in PDF or view online for FREE
  • Here you can View online or download the Driver / Update for the Sharp UP-X200 (serv.man26) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp UP-X200 (serv.man26) EPOS. Information contained in Sharp UP-X200 (serv.man26) Driver / Update (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.