Sharp UP-X200 (serv.man16) Driver / Update ▷ View online
9
g) Online data stored under the HD2 /Preset/ Sales folder is no longer extracted to the RAM memory area at booting.
h) Preset “Online data” is written to RAM and HD2/ Preset folder in order to avoid loss of new preset data in the case of a Power Failure.
10. Initial key entry before (Customer or Employee key) MCR card reading is skipped if it is set accordingly at the “Setting.ini file”.
11. The meaning of the Terminal/ Bill setting “Zero priced” PLU’s printed on Bill: Yes/No” is changed to “ Zero turnover” PLU’s printed on Bill.
h) Preset “Online data” is written to RAM and HD2/ Preset folder in order to avoid loss of new preset data in the case of a Power Failure.
10. Initial key entry before (Customer or Employee key) MCR card reading is skipped if it is set accordingly at the “Setting.ini file”.
11. The meaning of the Terminal/ Bill setting “Zero priced” PLU’s printed on Bill: Yes/No” is changed to “ Zero turnover” PLU’s printed on Bill.
The following items 1 to 7 are resolved problems
1. The following entry caused double update (except at Clerks turnover) and also created 2 times a closed transaction.
Operation/ Reason: Insert a Clerk key and just press the [modifier key] without any item entry causes that a previous transaction is again
finalised and updated.
Condition: Modifier PLU is set to be operated before the actual PLU entry
(Revenue Centre / Function/ Modifier key entry : Before original PLU)
and “Real Clerk key” is set to auto finalise upon removal.
2. Previously the setting at -- (Key Programming/Area Layout/Room Properties
Default price level for room) was overwritten after changes were done at
-- Floor Management/Change Section Plan
3. In case for a Guest name was entered to an open transaction and it was next merged to a GLU, the Guest name was not shown in “Open
table list.
Now also in the case the Guest name is transferred to the GLU.
4. In a POS-Server system configuration with scale connection, the scale was only working at the POS-server but not at a Client terminal.
Now it is working correctly at any terminal.
Note: Compulsory scale items can not be registered at a terminal were no scale is connected
5. At UP-X200 KP programming by room previously did not work at version 1.5.0.6. In version 1.5.0.8 and version 1.6.0.8 this has been
corrected.
6. At PMS file base file name and file format of POST file is modified at version 1.5.0.8 and version 1.6.0.8
7. The Back Office Sales report: Void/Refund/Return sales previously reported no data. This bug has been corrected since version 1.5.0.7 and
version 1.6.0.8
1. The following entry caused double update (except at Clerks turnover) and also created 2 times a closed transaction.
Operation/ Reason: Insert a Clerk key and just press the [modifier key] without any item entry causes that a previous transaction is again
finalised and updated.
Condition: Modifier PLU is set to be operated before the actual PLU entry
(Revenue Centre / Function/ Modifier key entry : Before original PLU)
and “Real Clerk key” is set to auto finalise upon removal.
2. Previously the setting at -- (Key Programming/Area Layout/Room Properties
Default price level for room) was overwritten after changes were done at
-- Floor Management/Change Section Plan
3. In case for a Guest name was entered to an open transaction and it was next merged to a GLU, the Guest name was not shown in “Open
table list.
Now also in the case the Guest name is transferred to the GLU.
4. In a POS-Server system configuration with scale connection, the scale was only working at the POS-server but not at a Client terminal.
Now it is working correctly at any terminal.
Note: Compulsory scale items can not be registered at a terminal were no scale is connected
5. At UP-X200 KP programming by room previously did not work at version 1.5.0.6. In version 1.5.0.8 and version 1.6.0.8 this has been
corrected.
6. At PMS file base file name and file format of POST file is modified at version 1.5.0.8 and version 1.6.0.8
7. The Back Office Sales report: Void/Refund/Return sales previously reported no data. This bug has been corrected since version 1.5.0.7 and
version 1.6.0.8
X300
V1.5.0.8
X200
V1.1.0.5
V1.5.0.8
X200
V1.1.0.5
[Compatibility]
The data is compatible with 1.5.0.6 previous version.
The data is not compatable with any 1.4.x.x versions.
Please refer to instructions of 1.5.0.4 below regarding data convert
[OS versions]
The following OS versions should be used.
The data is compatible with 1.5.0.6 previous version.
The data is not compatable with any 1.4.x.x versions.
Please refer to instructions of 1.5.0.4 below regarding data convert
[OS versions]
The following OS versions should be used.
10
If not already updated please do so at this timing:
UP-X200 OS version 1.23
UP-X300 OS version 1.07
UP-X200 OS version 1.23
UP-X300 OS version 1.07
The following items 1 to 4 are resolved problems
1. Scale compulsory item can be registered at the terminal which isn't connected scale.
Note: It is modified in such a way that compulsory scale items cannot be registered at
terminals to which a scale is not connected.
2. KP programming by room doesn't work at UP-X200.
3. At clerk report the closed check amount is not correct.
4. At PMS file base file name and file format of POST file are mofified.
1. Scale compulsory item can be registered at the terminal which isn't connected scale.
Note: It is modified in such a way that compulsory scale items cannot be registered at
terminals to which a scale is not connected.
2. KP programming by room doesn't work at UP-X200.
3. At clerk report the closed check amount is not correct.
4. At PMS file base file name and file format of POST file are mofified.
X300
V1.5.0.6
X200
V1.1.0.4
V1.5.0.6
X200
V1.1.0.4
[Compatibility]
The data is compatible with 1.5.0.4 previous version.
The data is not compatable with any 1.4.x.x versions.
Please refer to instructions of 1.5.0.4 below regarding data convert
At customer bill delete the RA amount was reversed and added to the total charge amount.
If at the “POS device programming” for Kitchen printers “KP recapitulation: YES” was selected and the same Link PLU is registered multiple
times the Qty. of tied PLU for KP printing was previously not correct.
When Kitchen printer was re-directed by printer re-direct selection to a Report printer the UP-X200 terminal exited to Windows CE screen.
When Terminal 1 KP is set to "Disable" and Terminal 2 KP is set to “Enable”.
Open a GLU at Terminal 1 and register an item the item is not printed, OK,however if the same GLU is opened at Terminal 2 and register an
another KP item, the item entered at Terminal 1 is printed.
The data is not compatable with any 1.4.x.x versions.
Please refer to instructions of 1.5.0.4 below regarding data convert
At customer bill delete the RA amount was reversed and added to the total charge amount.
If at the “POS device programming” for Kitchen printers “KP recapitulation: YES” was selected and the same Link PLU is registered multiple
times the Qty. of tied PLU for KP printing was previously not correct.
When Kitchen printer was re-directed by printer re-direct selection to a Report printer the UP-X200 terminal exited to Windows CE screen.
When Terminal 1 KP is set to "Disable" and Terminal 2 KP is set to “Enable”.
Open a GLU at Terminal 1 and register an item the item is not printed, OK,however if the same GLU is opened at Terminal 2 and register an
another KP item, the item entered at Terminal 1 is printed.
X300
V1.5.0.4
X200
V1.1.0.4
V1.5.0.4
X200
V1.1.0.4
[Compatibility]
The data is not compatible with any previous version.
Please make a CSV backup of your previous data. Convert the CSV data by the “CSV convert tool” on a PC and then “Restore”
the new CSV file to your terminal or system. (Please refer to separate documentation see EPOS TECH WEB)
Please make a CSV backup of your previous data. Convert the CSV data by the “CSV convert tool” on a PC and then “Restore”
the new CSV file to your terminal or system. (Please refer to separate documentation see EPOS TECH WEB)
Do not install the new Version with “keep current data” or copy and paste CDB file from any older version.
11
[OS versions]
The following OS versions should be used. If not already updated please do so at this timing:
The following OS versions should be used. If not already updated please do so at this timing:
UP-X200 OS version 1.23
UP-X300 OS version 1.07
The following items 1 to 6 are specification changes or additions
1. The reporting of UP-X300 is improved :
a) B.O. reports and F.E. reports are accessible via F.E. macro keys
b) Programming of report issue/not issue for EOD (EOS) is improved. (At
B.O./ Report format/End of Day/End of Period the setting of: "Issue/Not issue“ is highlighted and is therefore directly visible).
c) By the X300_Mainwindow.ini file the access for EOD at F.E. can be limited to only Daily, or remain selectable (as previous version)
d) The PLU report only reports the price levels which are actually used.Zero skip (if preset) is applied to each individual PLU price level.
UP-X300 OS version 1.07
The following items 1 to 6 are specification changes or additions
1. The reporting of UP-X300 is improved :
a) B.O. reports and F.E. reports are accessible via F.E. macro keys
b) Programming of report issue/not issue for EOD (EOS) is improved. (At
B.O./ Report format/End of Day/End of Period the setting of: "Issue/Not issue“ is highlighted and is therefore directly visible).
c) By the X300_Mainwindow.ini file the access for EOD at F.E. can be limited to only Daily, or remain selectable (as previous version)
d) The PLU report only reports the price levels which are actually used.Zero skip (if preset) is applied to each individual PLU price level.
2. Improvement of price level specification is realized :
a) Selection of price level shift is valid per item/ per transaction or stay down.
b) Price level selection by clerk.
c) Default Price level by room
d) Default Price level selection by terminal.
a) Selection of price level shift is valid per item/ per transaction or stay down.
b) Price level selection by clerk.
c) Default Price level by room
d) Default Price level selection by terminal.
3. Improvements of printer related issues:
a) Manually activate/de-activate alternative printers.
b) Possibility to delete stored error printing job (Administrator password)
For this entry the Administrator password must be changed to numeric code.(Currently as default it is changed to: 12345678 )
c) New additional KP assignment are realized:
KP device assignment valid for a room
KP device assignment valid for a terminal
a) Manually activate/de-activate alternative printers.
b) Possibility to delete stored error printing job (Administrator password)
For this entry the Administrator password must be changed to numeric code.(Currently as default it is changed to: 12345678 )
c) New additional KP assignment are realized:
KP device assignment valid for a room
KP device assignment valid for a terminal
4. The Customer file specification are enhanced :
a) The transfer of table data to the Customer file is realised.
(Also individual items can be transferred by the BS function).
a) The transfer of table data to the Customer file is realised.
(Also individual items can be transferred by the BS function).
12
b) For charge payments each VAT totalizer is stored in the customer file.
c) Print a complete customer’s bill via the F.E. application software.
d) Customers Bills for a range of customer can also be issued.
c) Print a complete customer’s bill via the F.E. application software.
d) Customers Bills for a range of customer can also be issued.
5. Condiment PLU tables can be assigned to a Price level:
For each Condiment table a price level can be assigned, which is applied to all linked Condiment PLU’s.
For each Condiment table a price level can be assigned, which is applied to all linked Condiment PLU’s.
6. The width of “scroll bar’s” at UP-X300 can be changed:
By “X300_StartUPMain2.ini” file setting it is now possible to change the width of the scroll bar. (Original width = 20 / Default setting is now
=30)
Caution: Above change is only effective after the terminal is twice rebooted.
The changed width is applied to the registration window; BS screen; all pop up screens and to all BackOffice screens with scroll bars.
By “X300_StartUPMain2.ini” file setting it is now possible to change the width of the scroll bar. (Original width = 20 / Default setting is now
=30)
Caution: Above change is only effective after the terminal is twice rebooted.
The changed width is applied to the registration window; BS screen; all pop up screens and to all BackOffice screens with scroll bars.
The following items 7 to 12 are resolved issues:
7. Previously the “Taxable amount totalizer” was not updated in case a transaction was automatically finalized by removal of a Clerk key.
7. Previously the “Taxable amount totalizer” was not updated in case a transaction was automatically finalized by removal of a Clerk key.
8. In case the “PLU Auto delete function” was executed at EOD it was previously still possible to register the deleted PLU at the Terminal (Front
End application)
9. Send Print data was previously lost under the condition that the paper near-end check was set as "Yes" and the printer was switched off.
10. Modem connection was at the previous versions only working correctly at the UP-X300 COM port 1. Now it works correctly at all COM
ports.
End application)
9. Send Print data was previously lost under the condition that the paper near-end check was set as "Yes" and the printer was switched off.
10. Modem connection was at the previous versions only working correctly at the UP-X300 COM port 1. Now it works correctly at all COM
ports.
11. The initialization of a connected modem was previously not correctly performed. With Online activated at COM 2 or 3 a part of the
initialisation command was still send to COM1. In case a printer was connected to COM1 this sometimes resulted in a print of strange
character.
initialisation command was still send to COM1. In case a printer was connected to COM1 this sometimes resulted in a print of strange
character.
12. The ATCOM.INI can now be modified via the BackOffice programming:
/POS Device programming/ Device programming / Online
/POS Device programming/ Device programming / Online
Ensure the X300 OS is V1.07 and X200 OS is 1.23
X300
Version 1.4.11.1 is compatable with 1.4.7.0 and above, please do not select "keep current data" if upgrading from a version
Click on the first or last page to see other UP-X200 (serv.man16) service manuals if exist.