DOWNLOAD Sharp UP-5900 (serv.man7) Service Manual ↓ Size: 2.26 MB | Pages: 19 in PDF or view online for FREE

Model
UP-5900 (serv.man7)
Pages
19
Size
2.26 MB
Type
PDF
Document
Service Manual
Brand
Device
EPOS / UP5900 Option Manual
File
up-5900-sm7.pdf
Date

Sharp UP-5900 (serv.man7) Service Manual ▷ View online

INSTALLATION MANUAL
CODE : 00Z
q
CONTENTS
Parts marked with "
!
" are important for maintaining the safety of the set. Be sure to replace these parts with specified
ones for maintaining the safety and performance of the set.
SHARP CORPORATION
UP5900VIME
POS TERMINAL
 MODEL
UP-5900
      
1.
Removing the Rear display filter  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1
2.
Replacing the Rear display filter  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1
3.
Removing the Top cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1
4.
Replacing the Top cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1
5.
Remove the power supply unit and AC cord . . . . . . . . . . . . . . . . . . . . . .  2
6.
Replacing the power supply unit and AC cord . . . . . . . . . . . . . . . . . . . . .  2
7.
Remove the LCD unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
8.
Replacing the LCD unit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4
9.
Replacing the FDD unit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5
10. Removing the FDD unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6
11. Extention RAM module, Memory Module: DIMM . . . . . . . . . . . . . . . . . . .  6
12. MCR UNIT: UP-E12MR2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7
13. Rear display UP-I20DP  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7
14. Pole display: UP-P20DP  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7
15. Drawer unit: ER-03DW/04DW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9
16. COM1, COM2 and COM3/5 Connector . . . . . . . . . . . . . . . . . . . . . . . . .  10
17. Built-in printer: UP-T80BP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11
18. KEY PAD: UP-C30PK  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  15
("V/VK" version)
UP-5900VI   
BATTERY DISPOSAL
Contains Nickel Metal Hydride Battery. Must be Disposed of Properly.
Contact Local Environmental Officials for Disposal Instructions.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS.
AVOID: SHORT-CIRCUITING THE BATTERY TERMINALS.
KEEP THE BATTERY AWAY FROM FIRE. 
*
 WHEN DISPOSING THE BATTERY, FOLLOW THE LOCAL 
RULES AND REGULATIONS. 
“BATTERY DISPOSAL”
THIS PRODUCT CONTAINS NICKEL-METAL HYDRIDE BATTERY.
THIS BATTERY MUST BE DISPOSED OF PROPERLY.
REMOVE THE BATTERY FROM THE PRODUCT AND CONTACT FEDERAL OR 
STATE ENVIRONMENTAL AGENCIES FOR INFORMATION ON RECYCLING AND 
DISPOSAL OPTIONS.
“TRAITEMENT DES ACCUMULATEUR USAGÉS”
CE PRODUIT CONTIENT UN ACCUMULATEUR À NICKEL MÉTAL HYDRIDE.
CET ACCUMULATEUR USAGÉ DOIT ÊTRE TRAITÉ CORRECTEMENT.
ENLEVEZ L’ ACCUMULATEUR DU PRODUIT ET PRENEZ CONTACT AVEC VOTRE 
AGENCE ENVIRONNEMENTALE LOCALE POUR DES INFORMATIONS SUR LES 
MÉTHODES DE RECYCLAGE ET DE TRAITEMENT.
UP-5900VI
Removing the Rear display filter
– 1 –
1. Removing the Rear display filter
1) Remove the two Screws 
1
.
2) Remove the Rear display filter 
2
.
2. Replacing the Rear display filter
Install the Rear display filter in the reverse order of removing.
3. Removing the Top cabinet
1) Remove the Screw 
1
.
2) Remove the Side cabinet 
2
.
3) Remove the Screw 
3
.
4) Remove the Printer lid 
4
.
5) Remove the two Screws 
5
.
6) Remove the Top cabinet 
6
.
a) Release the latches 
a
b
 and 
c
 in that order. Slide the upper
cabinet to the right and release the latch on the right.
b) Lift the top cabinet and put it straight in the direction of arrow A.
( Be careful not to pull the cable between the LCD I/F PWB-Key
pad PWB of the top cabinet and the MAIN PWB of the Bottom
cabinet.)
c) Pull and remove the following cables between the LCD I/F PWB
of the top cabinet and the MAIN PWB of the Bottom cabinet.
• LCD Cable 
7
 : MAIN PWB-LCD unit : CN31
• Touch panel cable 
8
 : MAIN PWB-Touch panel PWB : CN34
• Key pad cable 
9
 : MAIN PWB : CN23
*
Key pad : UP-C30PK is optional.
4. Replacing the Top cabinet
Install the top cabinet in the reverse order of removing. Before installing,
make sure that each connector is connected securely.
 Precautions
•  Before installation, be sure to turn off the power.
• Use gloves to protect your hands from being cut by the angle and
the chassis.
• Connect all the cables securely. When connecting or disconnecting
the cables, be careful not to apply stress to the cables. (It may
cause disconnection.)
•  Ground the human body to prevent against troubles and dust adhe-
sion to the LCD by static electricity. When assembling the LCD, use
a discharge blower to prevent against dust intrusion.
•  Be careful of the high voltage of the inverter PWB transformer.
•  Place the top cabinet with LCD panel side down, Please use a clean
dust free clothe to protect the touch panel and LCD area.
1
2
A
4
7
8
3
5
5
6
1
2
a
b
c
9
UP-5900VI
Removing the power supply unit and AC cord
– 2 –
5. Removing the power supply unit 
and AC cord
1) Remove the two screws 
1
.
2) Remove the AC cord cover 
2
.
3) Remove the three screws 
3
.
4) Remove the bottom plate 
4
.
5) Remove the screw 
5
 and cable holder 
6
.
6) Remove the power supply unit and AC cord.
a) Remove the screw 
7
 and the earth wire 
8
.
b) Remove the four screws 
9
.
c)
Remove the power supply cover 
F
.
d) Remove the power supply cable 
G
.
e) Use a minus screwdriver 
A
 to looser the AC cord fixing screws
(2 pcs.) of the power supply unit.
f)
Remove the three screws 
H
.
6. Replacing the power supply unit 
and AC cord
Install the in the power supply unit and AC cord in the reverse order of
removing.
Before installing, make sure that each connector is connected securely.
3
4
6
5
1
2
*
When connecting the AC cord to the power supply unit in assembly,
tighten with the torque of 3 kg/cm 
m
1 kg/cm.
A
7
10
11
12
12
9
9
9
8
Page of 19
Display

Sharp UP-5900 (serv.man7) Service Manual ▷ Download

  • DOWNLOAD Sharp UP-5900 (serv.man7) Service Manual ↓ Size: 2.26 MB | Pages: 19 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sharp UP-5900 (serv.man7) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp UP-5900 (serv.man7) EPOS. Information contained in Sharp UP-5900 (serv.man7) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.