Sharp UP-3515 (serv.man5) Service Manual ▷ View online
Page 6 - 6
15.
Online function (Clerk ZReport) in relation to the ECR status.
16.
Leaving the Diagnostic mode may result in an error.
If the machine has been powered off and on again, the error ‘LACKING MEMORY’ may occur
when leaving the Diagnostic mode. At this version, this error will not be shown anymore.
when leaving the Diagnostic mode. At this version, this error will not be shown anymore.
17.
Stacked Reports.
A Stacked Report called at the Satellite shows a “strange” behaviour like no cut between the
individual reports or even not printed correctly at all. This is corrected.
individual reports or even not printed correctly at all. This is corrected.
Page 6 - 6
15.
Online function (Clerk ZReport) in relation to the ECR status.
16.
Leaving the Diagnostic mode may result in an error.
If the machine has been powered off and on again, the error ‘LACKING MEMORY’ may occur
when leaving the Diagnostic mode. At this version, this error will not be shown anymore.
when leaving the Diagnostic mode. At this version, this error will not be shown anymore.
17.
Stacked Reports.
A Stacked Report called at the Satellite shows a “strange” behaviour like no cut between the
individual reports or even not printed correctly at all. This is corrected.
individual reports or even not printed correctly at all. This is corrected.
Page 6 - 6
15.
Online function (Clerk ZReport) in relation to the ECR status.
16.
Leaving the Diagnostic mode may result in an error.
If the machine has been powered off and on again, the error ‘LACKING MEMORY’ may occur
when leaving the Diagnostic mode. At this version, this error will not be shown anymore.
when leaving the Diagnostic mode. At this version, this error will not be shown anymore.
17.
Stacked Reports.
A Stacked Report called at the Satellite shows a “strange” behaviour like no cut between the
individual reports or even not printed correctly at all. This is corrected.
individual reports or even not printed correctly at all. This is corrected.
Page 6 - 6
15.
Online function (Clerk ZReport) in relation to the ECR status.
16.
Leaving the Diagnostic mode may result in an error.
If the machine has been powered off and on again, the error ‘LACKING MEMORY’ may occur
when leaving the Diagnostic mode. At this version, this error will not be shown anymore.
when leaving the Diagnostic mode. At this version, this error will not be shown anymore.
17.
Stacked Reports.
A Stacked Report called at the Satellite shows a “strange” behaviour like no cut between the
individual reports or even not printed correctly at all. This is corrected.
individual reports or even not printed correctly at all. This is corrected.
Display