DOWNLOAD Sharp UP-3500 (serv.man34) Service Manual ↓ Size: 782.08 KB | Pages: 59 in PDF or view online for FREE

Model
UP-3500 (serv.man34)
Pages
59
Size
782.08 KB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
EPOS / UP3500 In-Line (IRC Network) Manual
File
up-3500-sm34.pdf
Date

Sharp UP-3500 (serv.man34) User Manual / Operation Manual ▷ View online

8
1) When the clerk signs on at a machine other than the one used in his or her previous operation:
In this case, the overlapped clerk data is sent from the master to the satellite (transfer of overlapped clerk
data).
2) When the clerk signs on at the same satellite as the one used in his or her previous operation:
In this case, no data transfer occurs between the master and the satellite but the data stored in the save file
of the satellite is called back. This permits quicker data look-up than above in 1).
In both cases, the overlapped clerk data is saved in the
master's overlapped clerk file as well as the satellite's
overlapped clerk data save file upon sign-off operation.
Whether the centralized clerk file system is used with or
without an overlapped clerk save file, the master's
overlapped clerk file can be accessed from any machine
in the IRC system.
• For selecting whether your system should have the overlapped clerk function or not, and whether
it should have overlapped clerk save files or not, consult your authorized SHARP dealer.
• To use the overlapped clerk function in the IRC system, the overlapped clerk function must be
enabled for all the master and satellite machines.
(2) Individual clerk file system
In this system, each clerk file is under the control of a satellite and you have to do programming for
clerks at each satellite. Even if a programmed clerk signs on at a satellite, a communication with the
master will not begin.
The overlapped clerk file in a satellite can only be accessed by the satellite itself. The data in the clerk
files at all satellites will be collected by the master each time a consolidated report is issued.
NOTE
Overlapped
clerk file
Overlapped
clerk save file
Overlapped
clerk file
1)
2)
Master
Satellite
Satellite
Overlapped
clerk file
Overlapped
clerk save file
Overlapped
clerk file
9
The sign-on operation is intended to assign a clerk to a machine (satellite/master) and enable him or her to
make registrations at the machine.
If a clerk successfully signs on at a machine, his or her clerk code appears on the LCD of the machine.
Sign-on procedure
(This procedure is the same as for clerk assignment at a standalone machine.)
Clerk assignment
• For the contactless clerk key system:
Set a corresponding clerk key to the clerk switch.
* The contactless clerk key is optional.
• For the clerk entry key system:
Touch a corresponding clerk entry key on the screen.
• For the WMF clerk key system (option):
Insert a corresponding WMF clerk key into the WMF clerk switch.
* The WMF clerk key is not a SHARP product.
• For the code entry system:
Enter a corresponding clerk code and touch the [CLK#] key.
• For the magnetic card reading system (option):
Swipe a corresponding clerk card through the magnetic card reader.
* The magnetic clerk card is optional.
If a secret code is programmed, the secret code entry window will pop up. Enter the secret code and touch
the [ENTER] key.
• The sign-on operation can be made only for one clerk at a time.
• Every clerk that is programmed for the system can sign on at any satellite. (Centralized clerk file system)
• A clerk, who has signed on at a machine using a contactless clerk key, can not sign on at any other
machine in the system until he or she signs off at the original machine. (Centralized clerk file system)
• If a clerk, who has signed on at a machine in the system using the clerk entry key system or
the code entry system, signs on at any other machine in the system, he or she is automatically
signed off at the original machine. (Centralized clerk file system)
• In case of trouble, the sign-on state can be cleared at the master. (Please consult your
authorized SHARP dealer for further details.)
Your POS terminal can provide the clerk + cashier system instead of current system (clerk only
system). If you want to change the system, please consult your authorized SHARP dealer.
Cashier assignment (Clerk + cashier system)
• For the cashier entry key system:
Touch a corresponding cashier key on the screen.
• For the code entry system:
Enter a corresponding cashier code and touch the [CSR#] key.
If a secret code is programmed, the secret code entry window will pop up. Enter the secret
code and touch the [ENTER] key.
NOTE
NOTE
5. Sign-on operation (clerk assignment) (REG mode/MGR mode)
10
A clerk sign-on report can be generated at the master. This report is used to know which clerks are currently
in sign-on state at which machines.
Report generation procedure
1. 
Enter the PGM2 mode from the mode selection window.
2.
Select “1 READING” from the displayed menu.
The READING window will appear.
3.
Touch the right-pointing arrow key down on the screen to display the rest of the menu for reading.
4. 
Select “45 INLINE CONFIG” from the displayed menu.
The INLINE READING window will appear.
5. 
Select “2 SIGN ON CLERK” from the displayed menu.
The PLEASE SELECT OUTPUT DEVICE. dialogue will appear.
6. 
Touch “1.DISPLAY” or “2.PRINT.”
• If a receipt/report printer is not set up for the master, “1.DISPLAY” is the only valid choice.
Clerk names, clerk codes and machine numbers of 
the machines at which the clerks are in sign-on state
Sample Print (master)
NOTE
6. Clerk sign-on report
11
The sign-off operation is intended to cancel the assignment of a clerk to a machine and terminate his or her
registration operation.
The sign-off operation at a machine (master or satellite) can be done only for the clerk who is in sign-on
state at the machine and not in the middle of a registration entry.
Sign-off procedure
• For the contactless clerk key system:
Remove the contactless clerk key.
* The contactless clerk key is optional.
• For the clerk entry key system:
Touch the same clerk entry key that you used to sign on.
• For the WMF clerk key system (option):
Pull out the WMF clerk key.
* The WMF clerk key is not a SHARP product.
• For the code entry system:
Touch the [CLK#] key.
• The sign-off operation can be made only for one clerk at a time.
• If a clerk signs on at a machine while another clerk has already signed on there using the clerk
entry key system or the code entry system, the preexisting clerk is automatically signed off
unless he or she is halfway through an item entry.
• If the sign-off operation for the contactless clerk key system is done while the corresponding
clerk is still in the middle of a registration entry, the transaction is finalized automatically.
Your POS terminal can provide the clerk + cashier system instead of current system (clerk only
system). If you want to change the system, please consult your authorized SHARP dealer.
Cashier sign-off procedure
• For the cashier entry key system:
Touch the same cashier entry key that you used to sign on.
• For the code entry system:
Touch the [CSR#] key.
NOTE
NOTE
7. Sign-off operation
(cancellation of clerk assignment) (REG mode/MGR mode)
Page of 59
Display

Click on the first or last page to see other UP-3500 (serv.man34) service manuals if exist.