Sharp UP-3500 (serv.man21) Service Manual ▷ View online
Page 5 14
1.
Enhancement of PLU code to 6 digits.
With this version, it is possible to have a 6 digit PLU code. Because the UPC2E format for scanning
items does have 6 digits also, it has to be distinguished by a new SRV parameter (#990D +1) which
feature is active. If 6 digits for PLU code are enabled, UPC2E articles are not supported any more.
items does have 6 digits also, it has to be distinguished by a new SRV parameter (#990D +1) which
feature is active. If 6 digits for PLU code are enabled, UPC2E articles are not supported any more.
Support of
UPC2E or
6 digit PLU code
9902D Default
UPC2E
0
√
6 digit PLU code
1
Remark:
Whenever the system has to be set up for 6 digits PLU code, the SRV parameter has to be set right
after Master Reset accordingly. Do not make any PLU programming prior to the change of this SRV
parameter.
In order to realise this feature, entering of a 6 digits PLU code is possible,
even 6 digit PLU code mode is not active. This is by i.e. Direct Keys, PLU2MENU, Condiment and
Combo entries the case. If only 5 digits are available, but 6 digits have been entered, the ECR will
show an error message by leaving the programming.
Page 6 14
2.
First/Last PLU/EAN Sales report.
With this version, a First/Last PLU/EAN Sales report is available. To determine at what time the
PLU/EAN was sold the first and the last time, additional information have to be stored. For this, a
new file is introduced.
In \SRV Mode\2 SETTING\10 FILE\2 PLU/EAN\[PAGE 3]
A new selection exist, where it can be distinguished either to
create or to delete the file.
This file does not exist by default.
In an Inline System, creating this file at the Master is sufficient.
The T2LOG file must exist, at least at the Satellites.
To get the related reports, please see the following new Job Codes.
For a StandAlone System:
Reading= \2 X1/Z1 MODE\1 READING\20 PLU FIRST LAST SALES
Resetting= \2 X1/Z1 MODE\2 RESETTING\7 PLU FIRST LAST SALES
For an Inline System:
Reading= \2 X1/Z1 MODE\4 SYSTEM READING\20 PLU FIRST LAST SALES
Resetting= \2 X1/Z1 MODE\5 SYSTEM RESETTING\7 PLU FIRST LAST SALES
These reports can be taken at the Master only.
Remark:
The quantity in the First/Last PLU/EAN Sales report will be taken from the PLU/EAN Report. If the
PLU/EAN Z report has been taken prior to the PLU/EAN First/Last Sales report, the quantities in the
First/Last PLU/EAN Sales report will be 0.
Voids and Promotions including Free Item will be reported with their quantities in the PLU/EAN
report, they will be reported in the PLU/EAN first/Last Sales report as well.
Also Drink Dispenser, Scale and Orderman sales are recorded.
If a PLU has been deleted from the PLU Preset file, there will be printed no information on the
First/Last Sales report for this PLU anymore.
This PLU First/Last Sales report can not be included into a Stacked Report sequence.
In an Inline System, this report can be taken only at the Master.
PLU/EAN was sold the first and the last time, additional information have to be stored. For this, a
new file is introduced.
In \SRV Mode\2 SETTING\10 FILE\2 PLU/EAN\[PAGE 3]
A new selection exist, where it can be distinguished either to
create or to delete the file.
This file does not exist by default.
In an Inline System, creating this file at the Master is sufficient.
The T2LOG file must exist, at least at the Satellites.
To get the related reports, please see the following new Job Codes.
For a StandAlone System:
Reading= \2 X1/Z1 MODE\1 READING\20 PLU FIRST LAST SALES
Resetting= \2 X1/Z1 MODE\2 RESETTING\7 PLU FIRST LAST SALES
For an Inline System:
Reading= \2 X1/Z1 MODE\4 SYSTEM READING\20 PLU FIRST LAST SALES
Resetting= \2 X1/Z1 MODE\5 SYSTEM RESETTING\7 PLU FIRST LAST SALES
These reports can be taken at the Master only.
Remark:
The quantity in the First/Last PLU/EAN Sales report will be taken from the PLU/EAN Report. If the
PLU/EAN Z report has been taken prior to the PLU/EAN First/Last Sales report, the quantities in the
First/Last PLU/EAN Sales report will be 0.
Voids and Promotions including Free Item will be reported with their quantities in the PLU/EAN
report, they will be reported in the PLU/EAN first/Last Sales report as well.
Also Drink Dispenser, Scale and Orderman sales are recorded.
If a PLU has been deleted from the PLU Preset file, there will be printed no information on the
First/Last Sales report for this PLU anymore.
This PLU First/Last Sales report can not be included into a Stacked Report sequence.
In an Inline System, this report can be taken only at the Master.
Page 7 14
3.
Increase number of GLU keys for Table layout and table status.
Since version V1.40, 99 GLU keys for the table layout and table status feature are available.
For some market environment the numbers of available GLU keys are not sufficient.
With this version, up to 250 GLU keys are available and
can also be placed to a free decidable screen with available properties such as key size, like current
spec.
Please refer to:
\SRV MODE\2 SETTING\7 FREE KEY LAYOUT\2 SETTING or
\PGM2 MODE\2 SETTING\2 DIRECT KEY\[SCREEN]\1 SETTING
For some market environment the numbers of available GLU keys are not sufficient.
With this version, up to 250 GLU keys are available and
can also be placed to a free decidable screen with available properties such as key size, like current
spec.
Please refer to:
\SRV MODE\2 SETTING\7 FREE KEY LAYOUT\2 SETTING or
\PGM2 MODE\2 SETTING\2 DIRECT KEY\[SCREEN]\1 SETTING
4.
Registration Screen show GLU order status colour.
In order to make the GLU order status also visible in the Registration Screen, change of the
background colour of the Table# in the Header Bar is now realized. To change or not to change the
back colour is definable by a new SRV parameter, #990B. If the parameter is set to YES, the back
colour will be changed after the finalisation of a GLU transaction. The back colour will be the same
than the colour of the GLU key (Bill print, NBAL, Reserved …).
background colour of the Table# in the Header Bar is now realized. To change or not to change the
back colour is definable by a new SRV parameter, #990B. If the parameter is set to YES, the back
colour will be changed after the finalisation of a GLU transaction. The back colour will be the same
than the colour of the GLU key (Bill print, NBAL, Reserved …).
GLU status in
Registration Screen
9902B
Default
No
0
√
Yes
1
The example shows the GLU# with a different back colour.
Remark:
In case \PGM2 MODE\2 SETTING\10 OPTIONAL\3 FUNCTION SELECT2\CLEAR GLU# DISP is set to
YES, there will be no update of the GLU status colour in the Header Bar after finalisation of the
GLU.
Page 8 14
5.
GLU key status colour after Payment & Bill.
Since V1.40 the table layout and table status function is supported. In relation to this function,
there is a feature of showing the status after Bill print.
In the previous version, table status works as follows:
When ever, after the finalisation of a GLU even with NBAL, FINAL or Media key, a Bill has been
printed, the colour of the GLU key changed to the “GLU KEY COL BILL”. In case a reorder has been
made to this GLU, the GLU key colour changed back to the colour of the highest order status.
How the machine treated the GLU key Bill status has been modified with this version. Different
possibilities are available and can be set by a new SRV parameter.
there is a feature of showing the status after Bill print.
In the previous version, table status works as follows:
When ever, after the finalisation of a GLU even with NBAL, FINAL or Media key, a Bill has been
printed, the colour of the GLU key changed to the “GLU KEY COL BILL”. In case a reorder has been
made to this GLU, the GLU key colour changed back to the colour of the highest order status.
How the machine treated the GLU key Bill status has been modified with this version. Different
possibilities are available and can be set by a new SRV parameter.
Checking of SCM(2) amount
(only if 907A=0 or 4)
GLU key status
after Media & Bill
9912A Default
Setting 1
0
√
Setting 2
1
against individual Clerk
totalizer
Setting 3
2
Setting 1
4
Setting 2
5
against
CA/CHK ID totalizer
Setting 3
6
Description of the different modes:
This table will give an overview about the different GLU key status in relation to an entry sequence.
Entry sequence
Setting 1
Setting 2
Setting 3
Order
Order Status
Order Status
Order Status
NBAL/FINAL
Order Status
Order Status
Order Status
BILL
Bill Status
Bill Status
Bill Status
Reorder
Order Status
Bill Status
Order Status
NBAL/FINAL
Order Status
Bill Status
Order Status
BILL
Bill Status
Bill Status
Bill Status
Reorder
Order Status
Bill Status
Order Status
MEDIA
Default
Default
Default
BILL
Bill Status
Default
Default
RESET BILL STATUS Default
Default
Default
Condition:
For every status, i.e. PLU GROUP, GLU KEY COL DEF and GLU KEY COL BILL, a different colour
must be set, because the status will be differentiate by the colour.
Click on the first or last page to see other UP-3500 (serv.man21) service manuals if exist.