Sharp SHARP POS SOFTWARE V4 (serv.man68) Driver / Update ▷ View online
sign on to a different till with different server and try to open the table. You are
prompted for which split to open. The second split (table 1.1) opens ok but if you
try to open the first split it says “Table 1 is open at Till 1”. Now fixed
prompted for which split to open. The second split (table 1.1) opens ok but if you
try to open the first split it says “Table 1 is open at Till 1”. Now fixed
64
Close session crash after master goes off line, now fixed
63
Garbled screen when voiding using left enabled server, fixed
62
If you open a table on one till then perform an item split and then sign off. Then
sign on to a different till with different server and try to open the table. You are
prompted for which split to open. The second split (table 1.1) opens ok but if you
try to open the first split it says “Table 1 is open at Till 1”. Now fixed
sign on to a different till with different server and try to open the table. You are
prompted for which split to open. The second split (table 1.1) opens ok but if you
try to open the first split it says “Table 1 is open at Till 1”. Now fixed
61
Active Tables were sometimes slow updating table status.
Fixed
Fixed
60
Refund display stayed on after selling refund item. It was not active however
unless next item was a child item
unless next item was a child item
59
pressing Enter on Qwerty keyboard when Done caused endless loop
58
Deposit operation selector greyed out Deposit button
57
Interval drinks: consolidated receipt combined items that were pre-ordered with
immediate items.Now fixed
immediate items.Now fixed
56
Manual-entry markdowns were disappearing from cash reports, now fixed
31/03/10
55
Feature Added
Micros Sales Groups
It is now possible to use tax fields 1-4 as Micros sales total groups 5-8 instead of
tax fields.
Micros Sales Groups
It is now possible to use tax fields 1-4 as Micros sales total groups 5-8 instead of
tax fields.
54
Feature Added
Surplus amount removed from drawer breakdown
It is now possible to remove the Surplus amount from the ‘Drawer Breakdown’
section of the ‘Close session’ and ‘House Cash’ reports.
It is now possible to remove the Surplus amount from the ‘Drawer Breakdown’
section of the ‘Close session’ and ‘House Cash’ reports.
53
Feature Added
Cashrsp items with zero price
To allow the CASHRSP file to include items with zero price a new setting can be
added to the C:\VPro\data\Tillxxx\S2001.ini file on each machine (where xxx is
the terminal number).
CASHRSPONZEROPRICE=1
Cashrsp items with zero price
To allow the CASHRSP file to include items with zero price a new setting can be
added to the C:\VPro\data\Tillxxx\S2001.ini file on each machine (where xxx is
the terminal number).
CASHRSPONZEROPRICE=1
52
Feature Added
GRAPHICAL LOGO ON BILL FOOTER
It is now possible to print the graphical logo on the Bill footer
GRAPHICAL LOGO ON BILL FOOTER
It is now possible to print the graphical logo on the Bill footer
51
Feature Added
CLOSE SESSION SERVER SALES REPORT SUPPRESSION
It is now possible to suppress the Server report from printing at Close session.
CLOSE SESSION SERVER SALES REPORT SUPPRESSION
It is now possible to suppress the Server report from printing at Close session.
50
Feature Added
NON
NON
– SHARP ‘CUSTOMER DISPLAY’ SUPPORT
It is now possible to use the POSLIGNE OCD 100 USB/Serial display with the
Sharp POS Software.
Sharp POS Software.
49
Feature Added
SALES BY SERVER REPORT OR SALES TRACKING
It is now possible to enable a product to appear on the server sales report. It is
also possible to configure the product to appear on the report under the following
criteria
SALES BY SERVER REPORT OR SALES TRACKING
It is now possible to enable a product to appear on the server sales report. It is
also possible to configure the product to appear on the report under the following
criteria
1. Assign the product to the first Server to sell an enabled item within a
transaction.
2. Assign the product to every Server to sell an enabled item within a
transaction.
3. Assign the product to the Server that finalises the transaction that
contains an enabled item within a transaction.
48
Feature Added
FLEXIBLE TEXT SCHEMES
It is now possible to change certain texts (on screen, in messages, or printed) to
be capable of modification through configuration (‘flexible texts’). The following
information describes the feature in general.
FLEXIBLE TEXT SCHEMES
It is now possible to change certain texts (on screen, in messages, or printed) to
be capable of modification through configuration (‘flexible texts’). The following
information describes the feature in general.
47
Feature Added
GUESTLINE RESLYNX PROMOTION SUPPORT
In order to utilise the discounts within with the Guestline Reslynx software the
following changes have been made to the way that Sharp POS calculates the
Subtotal Discounts.
The Subtotal discounts are now calculated by item allowing the .POS and
Cashrsp files to show the discount that has been applied to each item.
GUESTLINE RESLYNX PROMOTION SUPPORT
In order to utilise the discounts within with the Guestline Reslynx software the
following changes have been made to the way that Sharp POS calculates the
Subtotal Discounts.
The Subtotal discounts are now calculated by item allowing the .POS and
Cashrsp files to show the discount that has been applied to each item.
45
When closing Sharp POS Software using ALT F10 occasionally the application
locked with the ‘closing down’ on the screen. Now fixed
locked with the ‘closing down’ on the screen. Now fixed
44
If Beep is disabled in VPM
– Configure Till Configuration – Physical the beep
tone is removed, if a server signs on and selects a macro then the beep is
switched back on until sign off, now fixed.
switched back on until sign off, now fixed.
12/02/10
43
Feature Added
Sales by server report or sales tracking, It is now possible to enable a product to
appear on the server sales report. Its is also possible to configure the product to
appear on the report under the following criteria.
Sales by server report or sales tracking, It is now possible to enable a product to
appear on the server sales report. Its is also possible to configure the product to
appear on the report under the following criteria.
4. Assign the product to the 1
st
Server to sell an enabled item within a
transaction.
5. Assign the product to every Server to sell an enabled item within a
transaction.
6. Assign the product to the Server that finalises the transaction that contains an
enabled item within a transaction.
42
Feature Added
Sharp POS Software now supports multiple displays, e.g. on the 9900 the inbuilt
display (no printer config is needed) and an external POSLIGNE OCD 100 Usb
display 'OCD-100' (printer config).
Sharp POS Software now supports multiple displays, e.g. on the 9900 the inbuilt
display (no printer config is needed) and an external POSLIGNE OCD 100 Usb
display 'OCD-100' (printer config).
41
Feature Added
Non
Non
–Sharp Customer display integration, Using the new Printer.def included you
can also define a new display type 'OCD-100'. This is the POSLIGNE OCD 100
Usb display
Usb display
Feature Added
It is now possible to suppress the Server report from printing at Close session
using the following S2001.ini setting.
SESSIONSERVERREPORT=0
It is now possible to suppress the Server report from printing at Close session
using the following S2001.ini setting.
SESSIONSERVERREPORT=0
40
Feature Added
For Guestline Reslynx integration Subtotal Discounts are now calculated by item
allowing the .POS file to show the discount that has been applied to each item.
In VPM
For Guestline Reslynx integration Subtotal Discounts are now calculated by item
allowing the .POS file to show the discount that has been applied to each item.
In VPM
– External Interfaces CashRSP v9 and also Hotel(STD)vers=6 are
required.
To activate this special mode, use s2001.ini setting on each machine.
PROMOCALCBYITEM=1
The following setting works for discounts and surcharges; if you want discounts
only use the setting above.
PROMOCALCBYITEMDISCOUNT=1
To activate this special mode, use s2001.ini setting on each machine.
PROMOCALCBYITEM=1
The following setting works for discounts and surcharges; if you want discounts
only use the setting above.
PROMOCALCBYITEMDISCOUNT=1
39
Feature Added
Micros. If 'Include Tax' not selected, it is now possible to use tax fields 1-4 for
sales totals groups 5-8
Micros. If 'Include Tax' not selected, it is now possible to use tax fields 1-4 for
sales totals groups 5-8
38
Feature Added
It is now possible to print the graphical logo footer on the Bill if the logo2= 1c 70 2
0 is placed in the receipt printer section of the printer.def
It is now possible to print the graphical logo footer on the Bill if the logo2= 1c 70 2
0 is placed in the receipt printer section of the printer.def
37
In VPM8 configure miscellaneous/more box didn't appear. Now fixed
36
When cancelling a credit card payment an authority prompt is displayed, if a
swipe card containing details of a server with the correct authority is swiped, it
does not do anything. If the server and password are entered manually it works
fine. Now fixed
swipe card containing details of a server with the correct authority is swiped, it
does not do anything. If the server and password are entered manually it works
fine. Now fixed
35
With 3 offer groups and 2 mix and match promotions. Both the mix and match
promotions are set to selling price by plu.
The promotions will work fine, the problem is that in VPM they both show the
promotions are set to selling price by plu.
The promotions will work fine, the problem is that in VPM they both show the
same PLU within the Mix and Match Action, now fixed
34
A transaction in Pay State on till could be opened from another till. Now fixed
33
This version will now allow a server timeout in the payment screen - provided no
part payments have been entered.
part payments have been entered.
32
When pressing Exit in the payment screen, after a part payment used to just
reverse the payment and exit. You now have to confirm this is what you want to
do.
reverse the payment and exit. You now have to confirm this is what you want to
do.
17/10/09
Sharp POS V4.1.242 VPM V2.1.0.168
31
Reworking of the way that the Sharp POS software communicates to the MSR
reader.
reader.
30
When using a large list with bottom function bar and messaging, the message is
sent and it can be seen flashing orange on the logged off screen on the bottom
bar but it can't be opened. It can also be seen flashing orange on the second
page of the bottom function bar within trading. If you use the View messages
button (function93) on the 1st page of the bottom bar within trading the message
can be read, but the orange button still shows even after 10 minutes. Now fixed
sent and it can be seen flashing orange on the logged off screen on the bottom
bar but it can't be opened. It can also be seen flashing orange on the second
page of the bottom function bar within trading. If you use the View messages
button (function93) on the 1st page of the bottom bar within trading the message
can be read, but the orange button still shows even after 10 minutes. Now fixed
14/10/09
Sharp POS V4.1.234 VPM V2.1.0.168
29
Feature Added
To allow CASHRSP items with 0 price to be included in the cashrsp the new
setting can be added to the s2001.ini file
CASHRSPONZEROPRICE=1
To allow CASHRSP items with 0 price to be included in the cashrsp the new
setting can be added to the s2001.ini file
CASHRSPONZEROPRICE=1
28
Improvements within the communication process when eft files are being
deleted. Using Yespay and Commidea Ocius
deleted. Using Yespay and Commidea Ocius
27
When using Priority kitchen printing the follow-on items were not being shown as
priority items on the KP. Fixed
priority items on the KP. Fixed
26
When performing a mix and match promoti
on ‘cheapest item free’ an extra free
item is shown on the screen to denote that an item has been deducted, but this
item was also being sent through to the cashrsp file and affecting the stock.
Fixed
item was also being sent through to the cashrsp file and affecting the stock.
Fixed
25
If you Open table 1 from the active tables list on the handheld and then select the
manual status change 'Main Course' then send the order it changes the table
status to main course on both the till and the handheld. If you log off the hand
held and back on the table status on both HHT and Till changes back to unused.
Now fixed
manual status change 'Main Course' then send the order it changes the table
status to main course on both the till and the handheld. If you log off the hand
held and back on the table status on both HHT and Till changes back to unused.
Now fixed
24
When manually changing the status of a table on the handheld it says no product
is associated with PLU 100000003. Now fixed
is associated with PLU 100000003. Now fixed
23
When using Reason codes for Voids under the following operation
Heineken
Heineken
Void then select the top Heineken
When reason codes are displayed, press the cross in the top right corner you get
the 'application error' send don't send. Fixed
Heineken
Heineken
Void then select the top Heineken
When reason codes are displayed, press the cross in the top right corner you get
the 'application error' send don't send. Fixed
22
If you sell a Condiment that also contains a promotion then void something from
Click on the first or last page to see other SHARP POS SOFTWARE V4 (serv.man68) service manuals if exist.