Sharp SHARP POS SOFTWARE V4 (serv.man44) Driver / Update ▷ View online
(previously printed whole voided line, and new line with quantity decremented).
494
NBAL with TableTill and no autorelease doesn't clear current transaction. Now
fixed
fixed
493
POS Ready 7 / Windows 7 problem with shared file access
http://blogs.msdn.com/b/winsdk/archive/2009/07/10/file-exists-access-
getfileattributes-findfirstfile-findnextfile-stat-behavior-over-smb-2-0.aspx
NOTE: the latest SharpPOS setup for RZ-X730/655 now adds DWORD value
SMB2=0 to
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\
Parameters
turning off SMB2
See also
http://blogs.msdn.com/b/winsdk/archive/2009/07/10/file-exists-access-
getfileattributes-findfirstfile-findnextfile-stat-behavior-over-smb-2-0.aspx
NOTE: the latest SharpPOS setup for RZ-X730/655 now adds DWORD value
SMB2=0 to
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\
Parameters
turning off SMB2
See also
https://technet.microsoft.com/en-
us/library/ff686200%28v=ws.10%29.aspx
492
VPM Data transfer wizard didn't output Table Areas. Now fixed
491
RCTPRECUTFEED= and BILLPRECUTFEED= Max values increased from 20 to
200
200
490
Customer entry in VPM did not limit the number of digits in Customer Number (for
User ID mode). Now fixed.
User ID mode). Now fixed.
489
New Diagnostics selection in Manager Utility Menu(2) on Master. Only
Transaction Number check (Slaves send next tran number to Master)
Diagnostics checks whether there are transaction history entries with same or
higher numbers. Prints report. Offers repair, either by changing the next tran
number to 1 greater than the highest in tranHistory (for that till), or by deleting
entries in Tran History.
Transaction Number check (Slaves send next tran number to Master)
Diagnostics checks whether there are transaction history entries with same or
higher numbers. Prints report. Offers repair, either by changing the next tran
number to 1 greater than the highest in tranHistory (for that till), or by deleting
entries in Tran History.
488
VPM Batch product adds: Slaves not being updated. Now fixed
487
Floorview status - truncate texts (15 chars on line)
486
numeric prefix to F131 (customer) didn't work. Now fixed
485
Customer balance report slow. Now improved
484
Realtime backup RTBU was causing memory leak when not enabled. Now fixed
483
Timeout for Micros-Fidelio was not working. The use the S2001.ini setting
MFTMO=30
from master only
MFTMO=30
from master only
482
Noticeboard required slave to have access to 'C' as a share on master till. If not
available it takes over a minute for W7 to report this to the program, causing
SharpPOS to freeze. Now fixed. Noticeboard message file path now only
requires the share 'VPro'.
available it takes over a minute for W7 to report this to the program, causing
SharpPOS to freeze. Now fixed. Noticeboard message file path now only
requires the share 'VPro'.
481
NoticeBoard GDI memory leak. Now fixed
480
Temporary customer names (fast food)
– now don't delete at SOD if table is still
active.
479
Com Port 3 would not work with any other peripherals except customer display.
Now fixed
Now fixed
15/08/14
Sharp POS V4.1.1565 VPM V2.1.0.384
478
Features Added
INTERVAL DRINKS
INTERVAL DRINKS
– DUPLICATE TICKETS.
LOYALTY RECEIPT ‘REDEMPTION VALUE’ TEXT, EDITABLE IN TEXT
SCHEMES.
MANUAL GLOBAL PRICE SHIFT.
PERIOD PRODUCT REPORTS
SCHEMES.
MANUAL GLOBAL PRICE SHIFT.
PERIOD PRODUCT REPORTS
– ZERO NOW OPTION.
TIME AND ATTENDANCE PASSWORD PROMPT REMOVAL.
SHARPPOS BILLBOARD.
AUTOMATIC SESSIONS.
SECONDARY CASHRSP PATH.
DEPOSITS AND ZERO RATED VAT BAND ITEMS IN REPORTS.
SHOW LAST PAID ORDER OPTION.
ITEMS AFTER SUBTOTAL PROMOTION.
PRINTING OF LOYALTY INFO LINES ON THE RECEIPT.
KP PROFILE ENHANCEMENT TABLE NUMBER FONT SIZE.
FULL PRODUCT OPTION FOR MODIFIERS.
LOYALTY PAYMENT METHODS.
VOID RECEIPT PRINT OUTS.
KPM MODE OPTIONS.
CASHRSP V20.
SERVER Z-REPORT.
STAR TSP800 WIDE PRINTER SUPPORT IN PRINTER.DEF.
DIRECT LOYALTY CARD SWIPE.
FREE-TEXT ENTRY WITHOUT CAPS LOCK.
CUSTOMER ACCOUNT REPORT NUMBER PRINT OPTIONS.
ANALYSIS CATEGORY SHIFT ENHANCEMENT.
SHARPPOS SYSTEM SHUTDOWN OR EXIT TO OS OPTION .
PLU EDIT DEPT AUTHORITY LEVEL.
ACTIVE TABLE DISPLAY LIST TABLE TRANSFER OPTIONS.
PRINT CUSTOMER INFO OPTIONS FOR BILL AND RECEIPT.
PRINT CUSTOMER INFO OPTIONS FOR KP.
BOOKING MANAGER
SHARPPOS BILLBOARD.
AUTOMATIC SESSIONS.
SECONDARY CASHRSP PATH.
DEPOSITS AND ZERO RATED VAT BAND ITEMS IN REPORTS.
SHOW LAST PAID ORDER OPTION.
ITEMS AFTER SUBTOTAL PROMOTION.
PRINTING OF LOYALTY INFO LINES ON THE RECEIPT.
KP PROFILE ENHANCEMENT TABLE NUMBER FONT SIZE.
FULL PRODUCT OPTION FOR MODIFIERS.
LOYALTY PAYMENT METHODS.
VOID RECEIPT PRINT OUTS.
KPM MODE OPTIONS.
CASHRSP V20.
SERVER Z-REPORT.
STAR TSP800 WIDE PRINTER SUPPORT IN PRINTER.DEF.
DIRECT LOYALTY CARD SWIPE.
FREE-TEXT ENTRY WITHOUT CAPS LOCK.
CUSTOMER ACCOUNT REPORT NUMBER PRINT OPTIONS.
ANALYSIS CATEGORY SHIFT ENHANCEMENT.
SHARPPOS SYSTEM SHUTDOWN OR EXIT TO OS OPTION .
PLU EDIT DEPT AUTHORITY LEVEL.
ACTIVE TABLE DISPLAY LIST TABLE TRANSFER OPTIONS.
PRINT CUSTOMER INFO OPTIONS FOR BILL AND RECEIPT.
PRINT CUSTOMER INFO OPTIONS FOR KP.
BOOKING MANAGER
– ENHANCED.
TABLE AREAS.
CANCELLING A LOYALTY CARD FROM A TRANSACTION.
QUANTITY DOWN ENHANCEMENT.
CASHRSP V21.
DEFERRED SUBTOTAL PROMOTIONS.
CANCELLING A LOYALTY CARD FROM A TRANSACTION.
QUANTITY DOWN ENHANCEMENT.
CASHRSP V21.
DEFERRED SUBTOTAL PROMOTIONS.
477
A manual entry promo could cause a crash if transaction contains a follow-on
item.
item.
476
KP when redirected didn't print header.
475
Floor View removed (greyed out) option 'Join...'
474
When re-directing a KP managed on another till, printing on the destination KP
sometimes stopped. Now fixed
sometimes stopped. Now fixed
473
VPM Configure Printers - bug when switching between 2 IP printers - the
displayed IP address didn't change. Now fixed
displayed IP address didn't change. Now fixed
472
VPM Till Config/Physical tab moved to Till Config(2)
471
CASHRSP omitted $ITEM lines if the PLU wasn't found. Now always includes
470
VPM Configure PLU Modifiers - 'Multiplier' didn't permit direct entry of decimal
Point. Now fixed
Point. Now fixed
469
Include the folders Data\Qlocal/QMaster in backups
468
Loyalty log new type 'enhanced' (3). VPM Config/External Interfaces/Loyalty
Adds product/promo descriptions
Adds product/promo descriptions
467
Table No. in macro didn't work (always opened table 2!). Now fixed
466
BillBoard could crash if rapid switches between states (logged on/off/payment).
Now fixed
Now fixed
465
Deferred promos being re-deferred after exit from payment. Unprinted KP
flags were restored, so printed again. Now fixed
flags were restored, so printed again. Now fixed
464
Transaction history problems loading from old versions (pre 4.1.135*, 6.2.2014).
now fixed.
now fixed.
463
PLU Shift 'S' indicator wasn't being switched off when Shift turned off. Now fixed
462
PLU Shift - now can use PLU Edit if shifted PLU doesn't exist
461
PLU Shift - didn't display correct price. Now fixed
460
Loyalty error messages sometimes show blank. Now fixed
459
With 'Direct Price Entry' set, use of the QTY function did not reset to 1 after use.
Now fixed
Now fixed
458
XM Macro didn't work on 2nd utility page. Now fixed
457
PRICE_0_USEDEFAULT (27-1-11) took price of default price band but didn't
store changed price band with item. Now fixed
store changed price band with item. Now fixed
456
List buttons containing a payment method fetched the incorrect default text
(option "default text only". Now fixed
(option "default text only". Now fixed
455
MM MixMatch: 'give cheapest free' didn't work if the offer included a zero-priced
item Zero-priced items were being skipped (so as not to be the chosen free item).
Now fixed
item Zero-priced items were being skipped (so as not to be the chosen free item).
Now fixed
454
Table with deposit as prepay - subtotal - crash/restart
Then after restart table opens in payment screen (prepayment has become a
payment), and you can't exit from it. Now fixed
Then after restart table opens in payment screen (prepayment has become a
payment), and you can't exit from it. Now fixed
453
Active table display didn't show customer names
452
MM MixMatch: Give Cheapest free didn't work with buckets containing 'Depts
(same PLU). Now fixed
(same PLU). Now fixed
451
With EFTOCIUSFIXEDWAIT and EFT Ocius, payments were being added twice
to transaction. Now fixed
to transaction. Now fixed
450
Billboard wasn't switching slide folders when necessary between states. Now
fixed
fixed
449
Picking a line from receipt window only worked up to line #255
This affects voiding; sell again; moving a seat; product info; quantity change; split
by item. Now fixed
This affects voiding; sell again; moving a seat; product info; quantity change; split
by item. Now fixed
448
BlueRunner now processes multiple promo codes
447
BlueRunner TX logging wasn't working
446
Non-default EOD export paths (non-ftp) were not being used!
445
Big Payment screen adjusted for amounts >= 1000.00
444
The setting (17-10-12) RCTBILL_DESCWITHFREETEXT=1
to print item description with freetext had been excluded for INFO type items.
Restriction removed.
to print item description with freetext had been excluded for INFO type items.
Restriction removed.
443
Function 8 Freetran now called "Table Release
’
442
Obsolete and dead function 37 ('Preset Server') removed
441
MixMatch problems with set selling price
440
Crash on seat ordering. Now fixed
439
To remove 0 quantity wastage sales in reports, clearing now deletes the entries
rather than setting the values to 0.
rather than setting the values to 0.
438
Bill should print item real quantity (qtyr) rather than original quantity (qty0) [as on
receipt]; showed wrong when merging split transactions and consolidating. Now
fixed
receipt]; showed wrong when merging split transactions and consolidating. Now
fixed
437
Period2 wastage totals not being cleared. Now fixed
436
Screen mode switch /s5 for 1280x800. Now included
435
Sometimes a mixmatch MM wouldn't trip (if MM was edited from earlier versions)
- trip value was still being tested although inaccessible. Now fixed
- trip value was still being tested although inaccessible. Now fixed
434
Voiding or unvoiding an item stores the (un)voiders server number as the item's
server.
server.
433
Promos were not storing server no. in promo item. Now fixed
432
When splitting: source item line is greyed out when split (or quantity = 0 in
quantity mode)
quantity mode)
431
Without auto table release, transactions were not being released from their
current till at log off. Now fixed
current till at log off. Now fixed
430
When redirecting a KP any pending spool files are moved to the new kp.
429
Deposit amount is now stored within display item in the receipt window.
428
Loyalty Realtime - if request inaccessible, after error message there was a 2nd
blank message. Now fixed
blank message. Now fixed
Sharp POS V4.1.1199 VPM V2.1.0.349
17/10/13
427
427
Feature Added
Using the following S2001.ini setting HOTELVOUCHERS=2
The standard hotel interface will now print 2 Hotel vouchers
Using the following S2001.ini setting HOTELVOUCHERS=2
The standard hotel interface will now print 2 Hotel vouchers
426
Feature Added
Text 'Cash given in change' is now editable in VPM
– Configure - text schemes
Click on the first or last page to see other SHARP POS SOFTWARE V4 (serv.man44) service manuals if exist.