Sharp SHARP POS SOFTWARE V4 (serv.man275) Driver / Update ▷ View online
previously the closing of open tables at close session was not compulsory.
100
Feature Added
A requirement to lock the adjustment of a transaction after a bill has been printed
may be required. A new VPM setting to enable this has been added.
Note: New items can be added and voided after the Bill has been printed but
items prior to the Bill print will be locked
A requirement to lock the adjustment of a transaction after a bill has been printed
may be required. A new VPM setting to enable this has been added.
Note: New items can be added and voided after the Bill has been printed but
items prior to the Bill print will be locked
99
Feature Added
Using the new function 123 (Analysis Shift) it is now possible to change the
analysis category of a product, including the KP analysis field, this is useful when
a customer wants to have a Starter as a Main meal without having the need to
duplicate products. There are 9 analysis categories available.
Using the new function 123 (Analysis Shift) it is now possible to change the
analysis category of a product, including the KP analysis field, this is useful when
a customer wants to have a Starter as a Main meal without having the need to
duplicate products. There are 9 analysis categories available.
98
Feature Added
Previously the Bill header would only show the Top line or the ‘Full Name’ /
receipt header set in VPM
Previously the Bill header would only show the Top line or the ‘Full Name’ /
receipt header set in VPM
– System Configuration – General. It is now possible
to show the Full Name / Receipt header on the top of the Bill.
97
Feature Added
Currently the dummy dessert feature only works when sold as part of a
condiment chain, the dummy dessert can now be selected at any time out side of
a condiment, so that when the product is pressed in the receipt window it will
display the associated list, allowing the operator to select the required dessert.
Currently the dummy dessert feature only works when sold as part of a
condiment chain, the dummy dessert can now be selected at any time out side of
a condiment, so that when the product is pressed in the receipt window it will
display the associated list, allowing the operator to select the required dessert.
96
Feature Added
When using
When using
Mix and Match with ‘Apply promotion’ set as the action, the offer
may depend on the order of item entry, i.e. discount applied to
items at point where last bucket was triggered. Using the new setting below the
trigger will always be the dearest items matching bucket, rather than the first
items. This feature is not enabled by default and must be activated by adding the
following setting to the c:\vpro\data\till001\s2001.ini file
MMPromoPlus=1
items at point where last bucket was triggered. Using the new setting below the
trigger will always be the dearest items matching bucket, rather than the first
items. This feature is not enabled by default and must be activated by adding the
following setting to the c:\vpro\data\till001\s2001.ini file
MMPromoPlus=1
95
Feature Added
The Sharp POS free text feature uses a PLU with the free text flag enabled for
manual qwerty keyboard entry. Previously the PLU text and the manually entered
free text were both printed on the Kitchen Printer, and only the preset PLU
description was shown on the receipt window.
This feature has now
The Sharp POS free text feature uses a PLU with the free text flag enabled for
manual qwerty keyboard entry. Previously the PLU text and the manually entered
free text were both printed on the Kitchen Printer, and only the preset PLU
description was shown on the receipt window.
This feature has now
been enhanced and it’s now possible to show the manually
entered free text on the screen and a combination of both preset PLU description
and manually entered free text, or just the manually entered free text on the
Kitchen printer.
In addition to this the manually entered free text can be set to appear on the Bill
and Receipt.
and manually entered free text, or just the manually entered free text on the
Kitchen printer.
In addition to this the manually entered free text can be set to appear on the Bill
and Receipt.
94
Feature Added
To remove unused sections and reduce the amount of paper used it is now
possible, to configure the information that is included within the Close Session /
House cash reports and Period Cash reports.
To remove unused sections and reduce the amount of paper used it is now
possible, to configure the information that is included within the Close Session /
House cash reports and Period Cash reports.
93
Feature Added
It is now possible to show a second Sharp POS receipt window on an external
LCD display. In conjunction with 3
It is now possible to show a second Sharp POS receipt window on an external
LCD display. In conjunction with 3
rd
party software this can be used to run
scrolling images i.e. JPegs, bmp files.
92
KP consolidation - under some circumstances items could be counted twice.
Now fixed
Now fixed
91
Product Information feature crashed. Now fixed
90
Micros - prevent non-numeric or oversized fields:
Micros.fmt82d(), CMicros::PostAccount()
Note money fields were filled with * before if too big - now it's '0'
Numeric fields are replaced by 0; text fields truncated.
Micros.fmt82d(), CMicros::PostAccount()
Note money fields were filled with * before if too big - now it's '0'
Numeric fields are replaced by 0; text fields truncated.
89
When pressing PRINT BILL on an empty transaction (to print previous bill) there
could be a pre-load or create transaction errors when first item entered. Now
fixed
could be a pre-load or create transaction errors when first item entered. Now
fixed
88
Texts in loyalty part of receipt no longer from s98sys.txt, this is now available in
VPM
VPM
– Text schemes.
87
Error correct on first item in table tran didn't correctly reopen a new transaction.
Now fixed
Now fixed
86
After OKing a zero total after subtotal, 'create pr-load error' could occur.
Now fixed
Now fixed
85
Big payment change screen - sometimes exits immediately.
Possibly caused by mechanical microswitch bounce. Software now double
checks.
Possibly caused by mechanical microswitch bounce. Software now double
checks.
13/08/10
Sharp POS V4.1.425 VPM V2.1.0.197
84
Feature Added
A new Mix and match action called ‘Set selling price by PLU(2)’ has been
introduced.
Example
On a Monday night Starters and mains when sold together are £15.00 if triggered
by selling another product set at £15. All these items are set as non
discountable, later in the transaction a subtotal food discount of 10% may be
applied, to stop this being applied to the mix and match items the set selling price
should use ‘Set selling price by plu2’
A new Mix and match action called ‘Set selling price by PLU(2)’ has been
introduced.
Example
On a Monday night Starters and mains when sold together are £15.00 if triggered
by selling another product set at £15. All these items are set as non
discountable, later in the transaction a subtotal food discount of 10% may be
applied, to stop this being applied to the mix and match items the set selling price
should use ‘Set selling price by plu2’
83
Feature Added
The receipt header can now be set to show on the bill header
The receipt header can now be set to show on the bill header
82
Feature Added
New printer.def printer types TM-T88-KPA, T88-2-KPA and TM-210-KPA
sections for saving paper on the KP by using medium sized font.
New printer.def printer types TM-T88-KPA, T88-2-KPA and TM-210-KPA
sections for saving paper on the KP by using medium sized font.
81
Feature Added
Commidea Ocius II has a new option to choose tran no. as source for the bill ref
Commidea Ocius II has a new option to choose tran no. as source for the bill ref
80
Feature Added
Printing PLU/EAN on receipt
Printing PLU/EAN on receipt
79
New settings relating to whether subsequent discounts in a transaction are
applied to other promos or not have been added
applied to other promos or not have been added
There is a setting in VPM
– Configure – System Configuration – More – Legacy
Mode, this defaults to enabled and will work as it does now.
With this setting unchecked then a combination of the 2 settings within
promotions can be used
With this setting unchecked then a combination of the 2 settings within
promotions can be used
Apply to other promos (this allows this promotion to be able to be applied to other
promotions)
promotions)
Discountable (this allows this promotion to be discountable)
78
Feature Added
Commidea
Commidea
– Ocius Bill Manager
77
Feature Added
Commidea - Ocius direct connection
Commidea - Ocius direct connection
76
Feature Added
Disabling the bottom bar exit key
Disabling the bottom bar exit key
75
Feature Added Front end server cash drawer assignment
74
Feature Added Print to Kitchen Printer via table only
73
Feature Added Time & attendance updates
72
Feature Added
86 item countdown zero stock enhancement
86 item countdown zero stock enhancement
71
Feature Added
PLU group number included in hotel posting file .pos
PLU group number included in hotel posting file .pos
70
Feature Added
VPM Batch Entry now allows 13 digit
VPM Batch Entry now allows 13 digit
PLU’s
69
Feature Added
The dummy dessert feature now applies to products that are not sold as part of a
condiment.
The dummy dessert feature now applies to products that are not sold as part of a
condiment.
68
Fix for the KP hold and Go when using disabling the exit key, the new macro for
Opening a table should be as follows whether Covers are used or not.
Opening a table should be as follows whether Covers are used or not.
C60 F70 F2 F70
Note: when using covers nothing should normally come after an F2 in a macro,
as it will be lost.
as it will be lost.
67
When using mix and match promotions with Set Selling and the set selling price
is greater that the total price of the items in the buckets SharpPOS ignored the
offer. Now fixed.
is greater that the total price of the items in the buckets SharpPOS ignored the
offer. Now fixed.
66
Refunds are counted as -ve quantity for dept/group report
65
If you open a table on one till then perform an item split and then sign off. Then
sign on to a different till with different server and try to open the table. You are
prompted for which split to open. The second split (table 1.1) opens ok but if you
try to open the
sign on to a different till with different server and try to open the table. You are
prompted for which split to open. The second split (table 1.1) opens ok but if you
try to open the
first split it says “Table 1 is open at Till 1”. Now fixed
64
Close session crash after master goes off line, now fixed
63
Garbled screen when voiding using left enabled server, fixed
62
If you open a table on one till then perform an item split and then sign off. Then
sign on to a different till with different server and try to open the table. You are
prompted for which split to open. The second split (table 1.1) opens ok but if you
try to open the first split it says “Table 1 is open at Till 1”. Now fixed
sign on to a different till with different server and try to open the table. You are
prompted for which split to open. The second split (table 1.1) opens ok but if you
try to open the first split it says “Table 1 is open at Till 1”. Now fixed
61
Active Tables were sometimes slow updating table status.
Fixed
Fixed
60
Refund display stayed on after selling refund item. It was not active however
unless next item was a child item
59
pressing Enter on Qwerty keyboard when Done caused endless loop
58
Deposit operation selector greyed out Deposit button
57
Interval drinks: consolidated receipt combined items that were pre-ordered with
immediate items.Now fixed
immediate items.Now fixed
56
Manual-entry markdowns were disappearing from cash reports, now fixed
31/03/10
55
Feature Added
Micros Sales Groups
It is now possible to use tax fields 1-4 as Micros sales total groups 5-8 instead of
tax fields.
Micros Sales Groups
It is now possible to use tax fields 1-4 as Micros sales total groups 5-8 instead of
tax fields.
54
Feature Added
Surplus amount removed from drawer breakdown
It is now possible to r
It is now possible to r
emove the Surplus amount from the ‘Drawer Breakdown’
section of the ‘Close session’ and ‘House Cash’ reports.
53
Feature Added
Cashrsp items with zero price
To allow the CASHRSP file to include items with zero price a new setting can be
added to the C:\VPro\data\Tillxxx\S2001.ini file on each machine (where xxx is
the terminal number).
CASHRSPONZEROPRICE=1
Cashrsp items with zero price
To allow the CASHRSP file to include items with zero price a new setting can be
added to the C:\VPro\data\Tillxxx\S2001.ini file on each machine (where xxx is
the terminal number).
CASHRSPONZEROPRICE=1
52
Feature Added
GRAPHICAL LOGO ON BILL FOOTER
It is now possible to print the graphical logo on the Bill footer
GRAPHICAL LOGO ON BILL FOOTER
It is now possible to print the graphical logo on the Bill footer
51
Feature Added
CLOSE SESSION SERVER SALES REPORT SUPPRESSION
It is now possible to suppress the Server report from printing at Close session.
CLOSE SESSION SERVER SALES REPORT SUPPRESSION
It is now possible to suppress the Server report from printing at Close session.
50
Feature Added
NON
NON
– SHARP ‘CUSTOMER DISPLAY’ SUPPORT
It is now possible to use the POSLIGNE OCD 100 USB/Serial display with the
Sharp POS Software.
Sharp POS Software.
49
Feature Added
SALES BY SERVER REPORT OR SALES TRACKING
It is now possible to enable a product to appear on the server sales report. It is
SALES BY SERVER REPORT OR SALES TRACKING
It is now possible to enable a product to appear on the server sales report. It is
Click on the first or last page to see other SHARP POS SOFTWARE V4 (serv.man275) service manuals if exist.