DOWNLOAD Sharp RZ-X750 (serv.man4) Service Manual ↓ Size: 13.18 MB | Pages: 84 in PDF or view online for FREE

Model
RZ-X750 (serv.man4)
Pages
84
Size
13.18 MB
Type
PDF
Document
Service Manual
Brand
Device
EPOS / RZ-X750 Service Manual
File
rz-x750-sm4.pdf
Date

Sharp RZ-X750 (serv.man4) Service Manual ▷ View online

7
FEATURES
Product features
• 
 The product uses a high visibility (250cd/m
2
 luminance) LCD screen with a touch 
screen interface for input. 
• 
 The display may be tilted for the best viewing angle. The angle can be adjusted within 
140 degrees left/right and 45 degrees up/down .
• 
 The product has no fan and is noiseless by design.
• 
 Hard disk supports SMART (Self Monitoring, Analysis and Reporting Technology) 
function, realizes a stable system configuration through the backup of OS, disk, 
partition, and file data, and provides disaster restoration solution by using Drive Clone 
software. 
• 
 This product uses Microsoft POS Ready 2009 (or similar operating system) which is 
designed for POS system and KIOSK applications.
• 
 This product has the wake-on function based on Magic Packet™ technology for 
remote booting and control through LAN.
• 
 The Resume (wake) on LAN function of X750 has the following limitations:
If BIOS function [Resume on LAN] is set to "Enable" the system will wake from “Power 
Off” IF the normal Widows® shut down procedure is completed.
-  If RZ-X750 is turned off by unnatural means (other than the normal Widows® shut 
down procedure) the Resume on LAN will NOT “wake” the terminal.Examples of 
unnatural “Power Off” include:
- Press the power button to turn off
- External power loss to the terminal (unplugged, blackout, etc.)
• 
 To enable the Resume on LAN function in the event of power loss set BIOS function 
Power Management setting [Restore on AC Power Loss]” to “Power On” state.
• 
 With this setting, if power is lost, the unit will turn on when power is restored and will 
re-enable the [Resume on LAN] function.
• 
 This product provides Several ports (USB, Serial, Parallel, LAN, and etc.) for facilitating 
the use of various POS peripheral devices.
Note:
 The application software will determine the usage and availability of the interfaces.
 If the terminal is turned off by Pressing and the power button and a power loss then occurs 
the terminal will NOT start automatically.
8
Product overview
Front
Operation Display (Touch Panel) 
15 inch TFT-LCD screen with touch sensitive screen displays the operational status of 
the system and the system can be operated by touch screen.
1
Power Button 
Push the power button to turn terminal "ON" (AC connection required). 
Switch the terminal "OFF" by pushing shortly the power button which initiates 
shutdown of Windows.
2
HDD Indicator 
LED lights up during hard drive activity.
3
Power Indicator 
LED lights up when the system is "ON." 
4
LCD Brightness Control 
Adjusts the brightness of the screen. (increase / decrease)
5
Magnetic Stripe Reader (optional) 
For reading magnetic stripe cards.
6
2
1
4
3
5
6
9
Rear / IO Ports
1 2
3
4
1
6
8
9 10
11
12
5
7
Serial Port 1, 2, 3, 4
Connects serial devices such as a customer display, a barcode scanner, or a receipt 
printer that use serial interface to the serial ports. 
1
Note:
 Default voltage at Pin 9 of COM2 / COM3 is 5V.
USB Connectors 
You can connect peripherals such as scanners, printers and keyboard to the USB 
(Universal Serial Bus) connectors. USB peripherals are hot swappable enabling plug 
and play.
4
DC Inlet Jack (AC/DC adaptor) 
To supply power to the system, please connect here the supplied AC/DC power 
adaptor (24V/7.5A).
2
VGA Connector
Connects VGA cable from a 2nd monitor.
3
LAN Connector (RJ 45) 
Connect RJ-45 cable for 10/100/1000 Base Ethernet connection to this port.
5
10
Audio Jack   
An external amplified speaker may be connected to the jack for Audio output.
6
8
Cash Drawer Ports (2*3 pin Molex)
Optional Sharp cash drawers can be connected to cash drawer port.
7
Parallel Port  
Connects parallel devices such as a printer to the parallel port. 
DC Outlet Jack (DC 12V)
Can be used as 12V DC power for second monitor (optional LCD customer display 
model RZ-X6DP2).
10
9
Powered USB Port   
You can connect the peripheral device using 24V DC power. This connector 
incorporates a socket that allows compatibility of standard USB peripherals.
11
HDD Rear Cover  
Remove the cover to install or replace the HDD. Consult your authorized SHARP 
dealer for further details.
12
Memory Rear Cover   
Remove the cover to replace the memory. Consult your authorized SHARP dealer for 
further details.
Note:
 The four power pins (two ground and two voltage) provide a specific voltage (+24V DC at 
a maximum rating of 3.5 amps) at that port.
Note:
 Stand must be removed to open Memory Rear Cover.
Page of 84
Display

Click on the first or last page to see other RZ-X750 (serv.man4) service manuals if exist.