Sharp RZ-X750 (serv.man3) Service Manual ▷ View online
35
System re-assembly
System assembly can be done by reversing disassembly procedure.
Replacing the Hard Disk Drive
Only 2.5 inch SATA type can be installed, hence the hard drive type should be checked
before purchase.
before purchase.
Make sure the system and peripherals are off.
1
Disconnect cables for the peripherals and DC power input jack from the system.
2
Remove the HDD plastic cover.
3
1
2
36
Remove the HDD as shown.
4
Install the new HDD as shown.
5
1
1
1
2
2
2
Attach the HDD plastic cover.
6
Assemble in the opposite way of disassembly and connect the peripheral cables &
DC power input jack.
DC power input jack.
7
37
Replacing the main memory
Make sure the system and peripherals are off.
1
Remove screws of the memory plastic cover, disassembly the memory plastic cover.
4
Remove the memory from the memory slot.
7
Remove screws of the metal cover and remove the metal cover.
5
Make sure that the eject clips on both sides of the socket are open.
6
Disconnect cables for the peripherals and DC power input jack from the system.
2
1
3
4
5
6
5
2
1
2
Remove screws from the stand.
3
38
Align the notches of the DIMM memory with the slot keys of the socket. This allows the
memory to be inserted. Gently push the memory into the slot until both eject clips rise
to the lock position.
memory to be inserted. Gently push the memory into the slot until both eject clips rise
to the lock position.
7
Assemble it in the opposite way of disassembly and connect the peripheral cables &
DC power input jack.
DC power input jack.
8
1
3
4
6
5
2
2
Click on the first or last page to see other RZ-X750 (serv.man3) service manuals if exist.