Sharp RZ-X650 (serv.man5) User Manual / Operation Manual ▷ View online
7
DISPLAY
Display angle
The display may be tilted for the best viewing angle. The angle can be adjusted within
140 degrees left/right and 45 degrees up/down as illustrated in the picture.
140 degrees left/right and 45 degrees up/down as illustrated in the picture.
Caution:
•
Do not pull the display beyond the maximum tilt angle nor apply excessive pressure to
the display.
•
Make sure to hold the body when pulling the display so that the terminal may not
move.
•
The LCD module built in this POS terminal is manufactured with highly precise
technology, however bright pixels or blank pixels may appear. Also an irregular color
and brightness may occur depending on the view angle. Please note that this type of
phenomena is common for LCDs and may not be a malfunction.
•
The backlight in the display is a consumable part.
•
When the LCD display can no longer be adjusted and becomes darker, you should
replace the LCD module. Consult your authorized SHARP dealer for further details.
8
BEFORE CALLING FOR SERVICE
The condition shown in the below left-hand column does not necessarily indicate
functional faults of the terminal. Please check the listed items at the right-hand column
“Checking” before calling for service.
functional faults of the terminal. Please check the listed items at the right-hand column
“Checking” before calling for service.
The following options are available for your POS terminal:
Do not try to install options yourself.
Do not try to install options yourself.
For details, contact your authorized SHARP dealer.
Condition
Checking
The power indicator is not lit.
• Is AC power available at the electrical outlet?
• Is the AC plug of the AC/DC adapter
connected to the electrical outlet?
• Is the AC power cord disconnected or
loosely connected to the AC/DC Adapter?
• Is the AC adapters DC power cable
connected to the DC inlet Jack of the POS
terminal?
terminal?
• Is the power switch of the terminal turned
“ON”?
LIST OF OPTIONS
1.
Magnetic card reader model RZ-X6MR1
2.
2 line rear customer display model RZ-X6DP1
3.
Remote drawer models ER-03DW/04DW/05DW/03DWB4/05DWB5
4.
The ER-48CC3 till is used for the ER-03DW/03DWB4
5.
The ER-48CC2 till is used for the ER-04DW
6.
The ER-58CC till is used for the ER-05DW/05DWB5
9
SPECIFICATIONS
* Specifications and appearance subject to change without notice for improvement.
Model
RZ-X650
External Dimensions
380(W) × 311(D) × 320(H) mm
Weight
6.65 kg
Power source
Official / nominal voltage and frequency
Power consumption
Operating: less than 60 W
Working temperature
5 to 35 °C
CPU
Intel Atom N270 1.6GHz
Hard Disk
2.5inch SATA 160GB
Memory
SODIMM 1GB
Display
Type: TFT Color LCD with backlight
Analog touch panel
Size: 381 mm (15inch) full screen
Resolution: 1024 × 768 dots
Control: XGA
Resolution: 1024 × 768 dots
Control: XGA
AC / DC Adapter
60W(12V/5A)
Accessories
AC Adaptor and AC cable
Click on the first or last page to see other RZ-X650 (serv.man5) service manuals if exist.