DOWNLOAD Sharp OPTIONS (serv.man17) Service Manual ↓ Size: 103.87 KB | Pages: 4 in PDF or view online for FREE

Model
OPTIONS (serv.man17)
Pages
4 Few pages! See other manuals at the bottom of the first or last page.
Size
103.87 KB
Type
PDF
Document
Driver / Update
Brand
Device
EPOS / Logo Utility Manual
File
options-sm17.pdf
Date

Sharp OPTIONS (serv.man17) Driver / Update ▷ View online

OPERATION MANUAL
CODE: 00ZER01PULOGO
LOGO UTILITY
MODEL 
ER-01PU
General Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1
Software Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1
Image Creation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1
Logo Download . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1
Appendix A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2
CONTENTS
SHARP ELECTRONICS (UK) LTD
1. GENERAL INFORMATION
The ER01PU Thermal Receipt Journal printer has the facility
to print a Logo stamp. This document shows with the help of
utility software how to create and send a Logo to the printer
unit.
The Logo is stored in Flash EPROM which means once the
logo has been loaded into the ER01PU it is fixed even if the
power is removed or the printer is Master Reset.
The logo images can be produced using a number of win-
dows drawing packages and saved in a .BMP format. This
image is then with the help of the utility converted and sent to
the printer. To print this stamp logo in an application the ESC
sequence {ESC o} or Hex {1b} {6f}  is used. This is automat-
ically done on the ERA750 by setting 912D, but on the
ERA850/880 the ESC sequence should be added to the
"CUT" command string in the PRINTER.DEF file.
e.g
cut= 1b 6f 1b 69
2. SOFTWARE INSTALLATION
After receiving the file ER01PU.EXE create a directory e.g
C:\01PULOG and copy this file into it, then type ER01PU, the
files required for utility installation will be created.
The utility software is for Windows 3.1 so after creating the
files as above load Windows. After loading, either create a
new program group or open an existing group e.g Applica-
tions, the from the Windows Program Manager, select File,
New, then select Program Item. Then select the file LOGO-
CONV.EXE from the directory that has been created earlier
e.g C:\01PULOG
This will create an Icon in the selected Program Group which
can now be executed.
3. IMAGE CREATION
Using a suitable Windows graphics package, Paintbrush is
adequate, create an image that has the following dimensions
Pels/Pixel
360 x 130
Centimeteres
9.53 x 3.43
Inches
3.75 x 1.35
The image should be saved as a BMP file (Black & White)
A blank logo has been provided with the utility called
BLANK.BMP, this can be used to size up a Logo correctly.
4. LOGO DOWNLOAD
After the image has been prepared it can be loaded into the
Utility Software and downloaded to the ER01PU. The opera-
tion should be carried out as follows.
1. Execute the Logo Utility by double clicking the icon in the
selected Program Group. The following screen will show :-
2. Click on the File box to select the logo image you wish to
download, the following screen will appear :-
Select the file that is required.
3. After selecting the file and pressing OK, the following will
be displayed :-
4. Ensure that the ER01PU is connected to the serial port of
your computer using the cable shown in Appendix A. Then
select Convert & Send, the following will display :-
1
ER01PU Logo Creation Utility
5. Then select Send or cancel to choose another image, if
selecting Send the following will be displayed :-
6. Check to see that the Dip-Switches on the ER01PU are as
shown noting which Baud rate is set. Switches 6,7 & 8 on the
ER01PU.
6,7 & 8 all off is 38400 baud
After pressing OK the following is displayed :-
7. The only changes that can be made are Port and Baud
Rate. Make sure these correspond to the Port on your PC
and the speed setting at the ER01PU.
IMPORTANT
If any changes are made to the Dip Switch settings on the
ER01PU, a Printer Master Reset must be carried out, this is
done by depressing both the Journal and Receipt Feed but-
tons and powering on.
When this has been done press OK and the following will be
displayed :-
As the utility begins to download to the printer the % will
increase.
The image will now be downloaded to the printer.
Appendix A
The connection cable for PC connectuion is the same as
connection to the ECR, as follows :-
5
5
SG
SG
2
3
3
2
SD
RD
SD
RD
ECR / PC side (9 pin Female)
ER01PU (9 pin Female)
4
6
6
4
DTR
DSR
DTR
DSR
ER01PU Logo Creation Utility
2
 
1997 BY SHARP ELECTRONICS (UK) LTD
All rights reserved.
Printed in United Kingdom
SHARP ELECTRONICS (UK) LTD
Information Systems Group
Sharp House
Newton Heath, Manchester M40 5BE,
United Kingdom
Display

Sharp OPTIONS (serv.man17) Driver / Update ▷ Download

  • DOWNLOAD Sharp OPTIONS (serv.man17) Service Manual ↓ Size: 103.87 KB | Pages: 4 in PDF or view online for FREE
  • Here you can View online or download the Driver / Update for the Sharp OPTIONS (serv.man17) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp OPTIONS (serv.man17) EPOS. Information contained in Sharp OPTIONS (serv.man17) Driver / Update (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.