Sharp ER-A771 (serv.man4) Service Manual ▷ View online
ER-A771VPM
SRV MODE PROGRAMMING (“IRC SETTING”)
5 – 1
CHAPTER 5. SRV MODE PROGRAMMING (“IRC SETTING”)
Before trying to perform inline setup, make sure to create (or delete) the
files required by the inline system using the following procedure: [SRV
files required by the inline system using the following procedure: [SRV
MODE] - [2 SETTING] - [10 FILE]. And then perform inline setup.
DISPLAY: SRV mode screen
Select "3 IRC SETTING" and press the ENTER key.
DISPLAY: IRC SETTING item selection screen
Select the item and press the ENTER key.
The item setting input screen is displayed.
1. [1 TERMINAL SETTING]
DISPLAY: Setting item select screen
Select the item to be changed and press the ENTER key.
The contents of setting are shown in the table below.
[1 SATELLITE]
DISPLAY: Setting screen
Select the item to be changed and press the ENTER key.
The setting content is described below.
When all the machine are set, press the [TL] key.
The [IRC SET UP] screen appears to start the setup.
DISPLAY:
~
~
DISPLAY TEXT
CONTENTS
SELECT ITEM
MRS
IP ADDRESS 1
IP ADDRESS 1
000~254
192
IP ADDRESS 2
IP ADDRESS 2
000~254
168
IP ADDRESS 3
IP ADDRESS 3
000~254
000
IP ADDRESS 4
IP ADDRESS 4
000~254
000
CLERK SYSTEM
Clerk system
CENTRALIZED
★
INDIVIDUAL
GLU SYSTEM
GLU system
CENTRALIZED
★
INDIVIDUAL
D-THRU SYSTEM
Drive thru system
CENTRALIZED
★
INDIVIDUAL
PLU STOCK SYSTEM
PLU stock system CENTRALIZED
★
INDIVIDUAL
PLU SAVE FILE
PLU save file
NOT
★
EXIST
OTHER SAVE FILE
Other save file
NOT
★
EXIST
BACKUP MASTER
B a c k u p m a s t e r
function
function
NOT
★
EXIST
IRC SET UP
1: SAVE FILE DELETE
2: OTHER FILE DELETE
3: SAVE FILE NON CREATE
4: OTHER FILE CREATE
2: OTHER FILE DELETE
3: SAVE FILE NON CREATE
4: OTHER FILE CREATE
ER-A771VPM
SRV MODE PROGRAMMING (“IRC SETTING”)
5 – 2
[2MASTER]
DISPLAY: Setting screen
Select the item to be changed and press the ENTER key.
The setting content is described below.
After setting as above, press the [TL] key to display the [MASTER LIST]
setting screen.
Set the terminal Nos. and machine Nos. of all machines (master/satel-
lite/backup master) that are included in the in-line system.
DISPLAY: Setting screen
Enter the terminal No. of inline system and press the ENTER key.
The setting content is described below.
DISPLAY: Setting screen
Enter the machine No. of inline system and press the ENTER key.
The setting content is described below.
When a machine is set, the screen changes to allow the setting of
another machine.
When all the machines are set, press the [TL] key.
The [IRC SET UP] screen appears to start the setup.
DISPLAY:
[3 BACK UP MASTER]
DISPLAY: Setting screen
Select the item to be changed and press the ENTER key.
DISPLAY TEXT
CONTENTS
SELECT ITEM
MRS
IP ADDRESS 1
IP ADDRESS 1
000~254
192
IP ADDRESS 2
IP ADDRESS 2
000~254
168
IP ADDRESS 3
IP ADDRESS 3
000~254
000
IP ADDRESS 4
IP ADDRESS 4
000~254
000
CLERK SYSTEM
Clerk system
CENTRALIZED
★
INDIVIDUAL
GLU SYSTEM
GLU system
CENTRALIZED
★
INDIVIDUAL
D-THRU SYSTEM
Drive thru system
CENTRALIZED
★
INDIVIDUAL
PLU STOCK SYSTEM
PLU stock system CENTRALIZED
★
INDIVIDUAL
PLU SAVE FILE
PLU save file
NOT
★
EXIST
OTHER SAVE FILE
Other save file
NOT
★
EXIST
BACKUP MASTER
B a c k u p m a s t e r
function
function
NOT
★
EXIST
DISPLAY TEXT
CONTENTS
SELECT ITEM
MRS
IP ADDRESS 4
IP ADDRESS 4
000~254
000
DISPLAY TEXT
CONTENTS
SELECT ITEM
MRS
MACHINE No.
Machine No.
0000000 ~
9999999
0000000
IRC SET UP
1: SAVE FILE DELETE
2: OTHER FILE DELETE
3: SAVE FILE NON CREATE
4: OTHER FILE CREATE
2: OTHER FILE DELETE
3: SAVE FILE NON CREATE
4: OTHER FILE CREATE
ER-A771VPM
SRV MODE PROGRAMMING (“IRC SETTING”)
5 – 3
The setting content is described below.
When all the machine are set, press the [TL] key.
The [IRC SET UP] screen appears to start the setup.
DISPLAY:
[4 STD. WITH IRC]
DISPLAY: Setting screen
Select the item to be changed and press the ENTER key.
The setting content is described below.
[5 STAND ALONE]
Used to restore to a stand alone machine.
DISPLAY TEXT
CONTENTS
SELECT ITEM
MRS
IP ADDRESS 1
IP ADDRESS 1
000~254
192
IP ADDRESS 2
IP ADDRESS 2
000~254
168
IP ADDRESS 3
IP ADDRESS 3
000~254
000
IP ADDRESS 4
IP ADDRESS 4
000~254
000
CLERK SYSTEM
Clerk system
CENTRALIZED
★
INDIVIDUAL
GLU SYSTEM
GLU system
CENTRALIZED
★
INDIVIDUAL
D-THRU SYSTEM
Drive thru system
CENTRALIZED
★
INDIVIDUAL
PLU STOCK SYSTEM
PLU stock system CENTRALIZED
★
INDIVIDUAL
PLU SAVE FILE
PLU save file
NOT
★
EXIST
OTHER SAVE FILE
Other save file
NOT
★
EXIST
BACKUP MASTER
B a c k u p m a s t e r
function
function
NOT
★
EXIST
IRC SET UP
1: SAVE FILE DELETE
2: OTHER FILE DELETE
3: SAVE FILE NON CREATE
4: OTHER FILE CREATE
2: OTHER FILE DELETE
3: SAVE FILE NON CREATE
4: OTHER FILE CREATE
ER-A771VPM
SRV MODE PROGRAMMING (“4 DOWN LOAD”)
6 – 1
CHAPTER 6. SRV MODE PROGRAMMING (“4 DOWN LOAD”)
After IRC SETUP, using this setting procedure, download the setting
data from the master.
data from the master.
DISPLAY: SRV mode screen
Select the "4 DOWN LOAD" and press the ENTER key.
DISPLAY: DOWN LOAD item selection screen
Select the item and press the ENTER key.
DISPLAY: DOWN LOAD METHOD item selection screen
Select the item and press the ENTER key.
[1ALL]
Download data from all the machines included in the master list.
[2 MACHINE SELECT]
Select the machine among the master list from which you want to down-
load data.
DISPLAY: MACHINE SELECT screen
Select the machine and press the ENTER key.
The downloading of data is started.
~
~
~
~
Click on the first or last page to see other ER-A771 (serv.man4) service manuals if exist.