Sharp ER-A750 (serv.man5) Service Manual ▷ View online
CHAPTER 4. SRV MODE
PROGRAMMING
DISPLAY: SRV mode screen
Select “2 SETTING” and press the ENTER key.
↓
DISPLAY: Setting item selection screen
Select the desired item and press the ENTER key.
↓
The item setting input screen is displayed.
1. [1 DEVICE ASSIGN]
DISPLAY: Setting item select screen
Select [1 DEVICE ASSIGN] and press the ENTER key.
↓
DISPLAY: DEVICE ASSIGN screen 1/2
↓
“PAGE DOWN” key
DISPLAY: DEVICE ASSIGN screen 2/2
↓
Select the item to be changed and press the ENTER key.
The setting content is described below.
The setting content is described below.
– 15 –
[1 DEVICE ASSIGN]
- [1 J PRINTER]
- [2 R PRINTER]
- [4 REPORT PRINTER]
- [5 KP#1]
- [6 KP#2]
- [7 KP#3]
- [8 KP#4]
- [9 KP#5]
- [10 KP#6]
- [11 KP#7]
- [12 KP#8]
- [13 KP#9]
- [2 R PRINTER]
- [4 REPORT PRINTER]
- [5 KP#1]
- [6 KP#2]
- [7 KP#3]
- [8 KP#4]
- [9 KP#5]
- [10 KP#6]
- [11 KP#7]
- [12 KP#8]
- [13 KP#9]
DISPLAY: Setting screen
DISPLAY TEXT
CONTENTS
SELECT ITEM
MRS
NOTE
TERMINAL#
Terminal number
000
∼
254
000
000:
Self terminal No.
This means local device.
This means local device.
1-254:
Except self terminal No.
This means re-routed device.
This means re-routed device.
Re-routing programming is only valid for printer.
CHANNEL#
Channel number
0
∼
7
0
0:
No RS-232 channel is assigned.
PRINTER NAME
Connected printer name
SHARP ER-01PU
★
SHARP ER-03/04RP
When this machine is used as a “report printer” of a bulky
data report such as PLU report, printing will be cut midway
automatically on the side of the ER-03/04RP when the
printing time reaches the time-out (about 30 sec). After that,
however, printing will be resumed automatically to complete
printing of the report.
data report such as PLU report, printing will be cut midway
automatically on the side of the ER-03/04RP when the
printing time reaches the time-out (about 30 sec). After that,
however, printing will be resumed automatically to complete
printing of the report.
EPSON TM-T80
EPSON TM-T85
EPSON TH-T300
AUTO CUTTER
Auto cutter function
No
★
Yes
PAPER SHEET
Paper sheet type setting
ONE SHEET
★
TWO OR MORE
– 16 –
[ 1 DEVICE ASSIGN ]
- [ 3 SLIP PRINTER]
DISPLAY: Setting screen
DISPLAY TEXT
CONTENTS
SELECT ITEM
MRS
NOTE
TERMINAL#
Terminal number
000
∼
254
000
000:
Self terminal No.
This means local device.
This means local device.
1-254:
Except self terminal No.
This means re-routed device.
This means re-routed device.
Re-routing programming is only valid for printer.
CHANNEL#
Channel number
0
∼
7
0
0:
No RS-232 channel is assigned.
PRINTER NAME
Connected printer name
EPSON TM-295
★
SHARP ER-FBP40
This printer is for SEEG only.
[1 DEVICE ASSIGN]
- [14 SCALE]
- [15 DRINK DISP.]
- [16 ONLINE]
- [15 DRINK DISP.]
- [16 ONLINE]
DISPLAY TEXT
CONTENTS
SELECT ITEM
MRS
NOTE
TERMINAL#
Terminal number
000
∼
254
000
000:
Self terminal No.
This means local device.
This means local device.
1-254:
Except self terminal No.
This means re-routed device.
This means re-routed device.
Re-routing programming is only valid for printer.
CHANNEL#
Channel number
0
∼
7
0
0:
No RS-232 channel is assigned.
– 17 –
2. [2 SYSTEM PRESET]
DISPLAY: Setting item select screen
Select “1 SYSTEM PRESET” and press the ENTER key.
↓
DISPLAY: SYSTEM RESET screen 1/3
↓
“PAGE DOWN” key
DISPLAY: SYSTEM RESET screen 2/3
↓
“PAGE DOWN” key
DISPLAY: SYSTEM PRESET screen 3/3
Select the job # to be changed and enter the value.
The content of each jog is described below.
[JOB #901]:MRS=0102
#901-A: Not used (Fixed at "0")
#901-B: Tax system
1. TAX system
901-B
Auto TAX 1~6
0
Auto VAT 1~6
1
★
Manual VAT 1~6
2
Manual VAT 1
3
Manual TAX 1~6
4
Auto VAT 1~3 and Auto TAX 4~6
5
#901-C: 1. Rounding system
1. Rounding system
901-C
Normal
0
★
SWEDEN
1
DENMARK
4
901-D:
1.TAB setting
1.TAB setting
901-D
0.0
1
0.00
2
★
0.000
3
[JOB#902] : MRS=0000
902-A:
1.In-line system
1.In-line system
902-A
No
0
★
Yes
1
902-B,C: Not used (Fixed at “00”)
902-D:
1.EFT terminal
2.Clerk key
1.EFT terminal
2.Clerk key
902-D
No
7 bit
0
★
8 bit
2
Yes
7 bit
4
8 bit
6
– 18 –
Click on the first or last page to see other ER-A750 (serv.man5) service manuals if exist.