Sharp DOS HOSPITALITY (serv.man50) Service Manual / Technical Bulletin ▷ View online
CHANGE CARRIED OUT IN THE SHAPE OF THE BOTTOM
CAB AND MEASURE TO ALLEVIATE PROBLEMS OF
CAB AND MEASURE TO ALLEVIATE PROBLEMS OF
VIBRATIONS OF THE BATTERY.
1.Model Name:
UP-5700
2.General:
<1> Change carried out in the shape of the bottom cab. (Please refer to page 3/5).
A change has been carried out in the shape of the bottom cab. This change has
been carried out so that the rotation angle of the AT cover is increased. This action
been carried out so that the rotation angle of the AT cover is increased. This action
has been carried out as a measure to prevent problems of damage to either the
AT cover of the bottom cab when excess pressure is applied to the AT cover in
a downward direction when opening the AT cover. With the larger rotation angle
AT cover of the bottom cab when excess pressure is applied to the AT cover in
a downward direction when opening the AT cover. With the larger rotation angle
of the AT cover, damage will not occur to either the AT cover or the bottom cab,
even if excess pressure is applied in a downward direction. In addition, the
change in shape of the bottom cab has improved the level difference between
even if excess pressure is applied in a downward direction. In addition, the
change in shape of the bottom cab has improved the level difference between
the clerk cover and the bottom cab. It has also improved the outward appearance
of the unit.
of the unit.
•
Effective time: From the 1st lot of 1998 April production.
<2> Measure to alleviate problems of vibrations of the battery.
There was a possibility of damage occurring to the battery due to vibrations which
occurred during shipping of the product, caused by a gap between the bottom cab
occurred during shipping of the product, caused by a gap between the bottom cab
and the battery. As a measure to alleviate this problem, the following action has
been carried out.
been carried out.
[1]Temporary action (Please refer to page 4/5).
The addition of a cushion between the bottom cab and the battery has been
carried out. This change has been carried out as a measure to eliminate the
carried out. This change has been carried out as a measure to eliminate the
looseness between the battery and the bottom cab. The added cushion has
been attached to the bottom cab.
been attached to the bottom cab.
•
Effective time:
UP-5700: From the 1st lot of 1998 April production to the 35th lot of 1998 July
UP-5700: From the 1st lot of 1998 April production to the 35th lot of 1998 July
production. (SER. No. 88052017 to 88052357)
1/5
ELECTRONIC CASH REGISTER
TECHNICAL BULLETIN
Date :
Model :
Ref :
Colour
Code :
11 th January 1999
UP5700
UP5700-002
White
Sharp Electronics (UK) Ltd, Technical Support Group
Originators Initials_____________ Supervisors Initials_____________ Approval Date____________
[2]Permanent action (Please refer to page 5/5).
The addition of a rib has been carried out to the battery receiving section of the
bottom cab. This action has been carried out as a measure to eliminate the gap
between the battery and the bottom cab.
bottom cab. This action has been carried out as a measure to eliminate the gap
between the battery and the bottom cab.
•
Effective time:
UP-5700: From the 36th lot of 1998 July production.
UP-5700: From the 36th lot of 1998 July production.
(from SER. No. 88052367)
3.Action:
Change carried out in the shape of the bottom cab.
This change has been carried out as a margin improvement measure, and therefore no
action is necessary in the markets.
Measure to alleviate problems of vibrations of the battery.
The cushion used in the temporary action described above has been added as a
measure to alleviate problems of vibrations during shipping, and therefore no service
action is necessary in the markets. Furthermore, this part has not been established as a
service part. The permanent action is a change that has been carried out as a measure
action is necessary in the markets. Furthermore, this part has not been established as a
service part. The permanent action is a change that has been carried out as a measure
to improve operationability, and therefore no action is necessary in the markets.
4.Parts action:
Ref.
No.
Model
name
Version
P/G No.
Current parts
New parts
Parts name
Effec-
tive
time
Inter-
change-
ability
Note
Parts code
Parts code
Price
rank
UP-5700
All
2 -44
GCABA7860BHZA
GCABA7860BHZB
BW
Bottom cab
’98/4
3
<Interchange>
1. Interchangeable.
4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
5. Interchangeable if replaced with same types of
related parts in use.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
6. Others.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
2/5
!
<1> Changed BOTTOM CAB
[1] Changed AT cover
New
A-section is cut away
No level difference
or
or
Level difference
- built up 0.5 mm
- built up 0.5 mm
Old
[2] Clerk cover level difference
New
Approx. 30
°
Approx. 80
°
Old
3/5
<2> Measure to alleviate problems of vibrations of the battery.
[1] Temporary measure
Added battery cushion
Battery cable
Battery
Battery cover
Arrow
Battery cushion
4/5
Display
