DOWNLOAD Sharp DOS HOSPITALITY (serv.man5) Service Manual ↓ Size: 81.49 KB | Pages: 9 in PDF or view online for FREE

This Manual supersedes the information contained within the UP5700 Version 4 Upgrade Manual. The
information contained in this manual shows the use program & configuration of the Waitermate Terminal,
in conjunction with the UP5300/5700

The Waitermate is a Hand-Held RF (Radio Frequency) order entry terminal. Its interfacing to the
UP5700 allows remote ordering to the UP5700 system. The interface has been developed so that all
programming of the Waitermate Terminal is done from a specified machine on the POS System. The
program that is created for the Waitermate is identical to that on the POS Terminal. The Products and
lists from the POS are used to create the files needed for the Waitermate. NO pricing is held on the
Waitermate, only Lists and products.

As the Waitermate is not as sophisticated as the POS Terminal certain restrictions have to be adhered
to when programming the POS. The restrictions listed below should be noted in order to create resilient
operation.

Restriction
Number

Restriction

Comment

1.

NO Link Lists

To overcome this set the products within a list
to another list

2.

NO Condiment PLU

=

s

Use Standard Lists with 0.00 priced items.
Product duplication may be necessary

3.

Products must only be linked to ONE List

Use Multiple Products

4.

Top Level Trading Screen is limited to One
Screen (i.e. 30 Buttons). Screens 2 - 5
cannot be used.

5.

Lists are limited to One Page of a Maximum
of 30 items Page 2 cannot be used

6.

Only 4 Methods of Payment are used on
the Waitermate Payment types 1,2,3,& 4 on
the POS

If less than 4 are needed on the Waitermate set
nothing in types 2,3,4 on the POS and only 1
will appear

7.

Only Two lines of text from the Button Text
should be used

8.

Maximum Recommended Products is 500

9.

Control Characters should not be used

Text for PLU’s and on Screens should not
contain control characters. (i.e. !\/”-()*,. etc)

10.

No Split Tables can Accessed

When using splits of any kind, only the parent
table can be accessed at the Waitermate. (i.e.
Table 1, 1.1, 1.2 are open, only table 1 can be
accessed at the Waitermate)

As the Waitermate uses Disk Space the machine that controls the Waitermate System MUST have
memory Board Fitted  (UPP02MB) if it is a Flash/Ram Terminal. If it is a Hard Disk POS the memory
is not required. It is recommended that if the installation is not a Standalone that the Waitermate Control
POS is a slave. In order to avoid unnecessary use of Disk space
the files required to Run the Waitermate system are contained in a special upgrade, this allows these files
only to be loaded when necessary. Contained in the Waitermate release is the Batch files
WMFLASH.BAT and WMHDD.BAT these files will upgrade any version 4 system to Waitermate.

N.B Using this upgrade on Version 3 POS Software will NOT work. The Waitermate Upgrades will
be carried on our Technical Web Site as are the Application Upgrades.

After Upgrading /Installing a Version 4 System select the machine to be the Waitermate Control POS
and then connect it to a PC using an APLD Cable. Then using WMFLASH.BAT for Flash/Ram POS
and WMHDD.BAT for Hard Disk POS follow the Instructions on the PC screen. When this has been
completed the POS is ready for Waitermate Connection. It is only necessary to carry this out at the
Control POS.

In order to set the Control POS carry out the following after Version 4 Upgrade.

1.

Copy the Waitermate Installation file WAITMnn.EXE into a New folder on the PC and Execute
it, then connect the PC to the POS using the APLD cable and enter WMFLASH of WMHDD
on the PC and follow the On-Screen Instructions.

2.

After completion re-start the POS and follow the Instructions below.