DOWNLOAD Sharp XE-A217 (serv.man4) Service Manual ↓ Size: 6.82 MB | Pages: 44 in PDF or view online for FREE

XE-A207/A217/A307

SPECIFICATIONS

– 8 –

Receipt paper feed key

Journal paper feed key

Function menu key

Auto menu key

Paid out key

Percent 1 key

Void key

Refund key

Help key

Discount key

Multiplication key

Decimal point key

Clear key

Numeric key

Price lookup/EAN key

Department code entry key

Department shift key

Clerk code entry key

Department 1-40 key

Cursor (up/down arrow) key

Mode key

Escape/Cancel key

Credit 1 key

Electronic journal view key

Foreign currency exchange key

Check 1 key

Payment menu key

Non-add code/Time display/Subtotal key

Total/No sale key

XE-A207/A217/A307

SPECIFICATIONS

– 9 –

When the printed text is getting dark or faint, paper dust may be stuck to
the print head, sensor and/or roller.

Clean them as follows:

Caution:

•  Never touch the print head with a tool or anything hard as it may dam-

age the head.

•  The paper cutter is mounted on the printer cover. Be careful not to cut

yourself.

1) Select the OFF mode.

2) Remove the printer cover.

3) Life up the printer roll arm.

4) Remove the paper roll.

5) Clean the print head with a cotton swab or soft rag moistened with

ethyl alcohol or isopropyl alcohol.

Clean the roller in the same manner.

6) Reset the paper roll correctly.

Part number

LTPC235 (S

II)

Type

1 sheet thermal (58mm paper) 
Roll paper drop in

Printing system

Line thermal

Number of digits

30 digits/line

Print speed

Approx. 15 lines / sec

Character size

3.0(H)mm x 1.25(W)mm

Printer cover key

No

Cutter type

Manual Cutter

Paper end sensor

•  Near end sensor : No 

•  End sensor : Yes

Paper width

58mm x 80

φ

MCBF

5 million lines

Printer roll arm

Print head

Roller

Type

SK-420 base (New)

Size

355(W) x 420(D) x 125(H) mm

Color

White: XE-A207W/XE-A217W, XE-A307
Black: XE-A207B/XE-A217B

Money case type

Removable type

Coin case type

Removable type

Compartment

5B/8C

Lock system

Front lock

Bell

No

Open sensor

No

Drawer separation No

Method of fixation

Fixed

Name

Parts code

Price rank

Description

Thermal roll paper TPAPR6656RC05

BA

5 ROLLS/PACK

420mm

355mm

125mm

XE-A207/A217/A307

SPECIFICATIONS

– 10 –

•  Water proof key cover (For XE-A207W/A207B, XE-A307): 

GCOVB2769BHZZ

Size

2GB,4GB, 8GB, 16GB, 32GB 
(SDHC memory card)

Recommended 
maker

•  San Disk (4GB-32GB):

SDSDB-4096-J95, SDSDH-OO8G-J95, 

SDSDX3-O16G-J31A, SDSDB-O32G-J95A

• Panasonic (2GB-4GB): 

RP-SDP02GE1K , RP-SDN02GE1A, 

RP-SDQ04GE1K, RP-SDN04GE1A

Sort

Text

Data/List

SD card 
formatting

FORMATTING

When the SD card is not formatted
yet, take the formatting operation.

Folder

S E L E C T
FOLDER

The programmed code is used the
file folder structure. Up to 8 digits
code can be programmed.

C R E AT E
FOLDER

The master folder can be created
for the data file.

Data saving

SALES DATA

Sales data

EJ DATA

Electronic journal data

IND. PROGRAM

Select the individual programming
data:
DEPARTMENT, PLU, GRAPHIC 
LOGO

ALL PROGRAM

All programming data

ALL RAM DATA

All RAM data

Data loading

IND. PROGRAM

Select the individual programming
data:

DEPARTMENT, PLU, GRAPHIC 
LOGO

ALL PROGRAM

All programming data

ALL RAM DATA

All RAM data

XE-A207/A217/A307

INSTALL

– 11 –

■

For the cash register to operate properly, you must initialize it before programming for the first time.

Follow this procedure.

1) Remove the register from its packing carton.

2) Insert the plug into the AC outlet.

Caution:

•  This operation must be performed without batteries loaded.

• Never install the batteries into the cash register before initializing it. Before you start operating the cash register, you must first initialize it, then

install two new alkaline batteries LR6 (“AA” size) on the register. Otherwise, distorted memory contents and malfunction of the cash register will

occur.

•  Never install the resister in saline areas (e.g.:close to the sea).

Installing the resister in such locations could cause component failure with the corrosion.

1) Display the “Language Selection” after turning on the power.

2) Press the numeric key for the number of your language.

After selecting the language, the register is initialized.

According to the displayed instruction, perform the setting.

1) Display the “DATE/TIME setting”.

2) Enter the date in 6 digits. For example, enter “050611” for June 5,

2011.

3) Press the [ 

4 ] key to select the time setting.

4) Enter the time in 4 digits. For example, enter “1430” for 2:30pm.

5) Press the [TL/NS] key to set the date and time.

1) Select the tax number (1 to 4) to set the tax rate.

2) Enter the tax rate in 7 digits (leading zeros may be omitted). For

example, press the [ 7 ] key to set 7%.

3) To set the second and later tax rates, press the [ 

4 ] key.

4) Press the [TL/NS] key to set the tax rate.

VAT is included in the entered price, and the tax amount is calculated

when tendered according to the VAT rate programmed.
By default, VAT1 is assigned to all items.

The HELP function instructs you how to assign VAT to department. After

pressing the [ 7 ] key, press the [HELP] key to access the HELP.

1) Select the mode to set the pass code using the [ 

2 ] or [ 4 ] keys.

2) Enter the code in 4 digits using the numeric keys.

3) Press the [TL/NS] key to set the mode pass code. 

If no pass code is set, press the [TL/NS] key.

1) Enter the code in 4 digits using the numeric keys.

2) Press the [TL/NS] key to set the manager pass code. 

If no pass code is set, press the [TL/NS] key.

1) To change the default logo text, press the [(DEL)] key to delete the

texts in each line. 
Enter the text using the character keys to print on the receipt.

2) Press the [TL/NS] key to set the receipt logo.

There are two ways for programming text; using character keys on the

keyboard or entering character codes with numeric keys on the key-
board.

You can enter characters according to the small figures printed in the

lower position of the numeric keys.
3 Refer to page 4 “5-1. KEYBOARD LAYOUT”. (XE-A207W/A207B)
3 Refer to page 7  “7-1. KEYBOARD LAYOUT”. (XE-A307)
For example to enter “A”, press the [ 8 ] key. To enter “B”, press the [ 8 ]
key twice.

There are two ways for programming text; using character keys (on the
programming key sheet) or entering character codes with numeric keys

on the keyboard.

To enter numerals, letters and symbols, simply press the corresponding
character on the programming key sheet.

Note: The HELP function instructs you how to set the logo message.

After entering “13”, press the [HELP] key to access the HELP.