Sharp XE-A217 (serv.man4) Service Manual ▷ View online
XE-A207/A217/A307
MAINTENANCE, DISASSEMBLY AND ASSEMBLY
– 24 –
■
PRINTER I/F PWB REMOVAL
1) Remove the flat cable from the printer I/F PWB.
2) Remove the screw. Disengage the pawl, and remove the printer I/F
PWB.
■
SIO I/F PWB REMOVAL
1) Remove the flat cable from the SIO I/F PWB. Remove the screw,
and remove the option angle.
2) Remove the hex screw, and remove the SIO I/F PWB.
■
POWER UNIT REMOVAL
1) Remove the option angle.
3 Refer to page 24, “ SIO I/F PWB REMOVAL.”
2) Remove the screw, and remove the POP cover.
3) Disconnect the connector from the main PWB.
4) Remove the screw, and remove the power unit.
Flat cable
Printer I/F PWB
Screw
Pawl
Flat cable
Screw
Screw
Option angle
SIO I/F PWB
Hex screw
POP cover
Screw
Screw
Connector
Power unit
Screw
Screw
XE-A207/A217/A307
MAINTENANCE, DISASSEMBLY AND ASSEMBLY
– 25 –
4-5. DRAWER UNIT
■
DRAWER SOLENOID REMOVAL
1) Release the lock on the bottom surface of the drawer unit, and open
the drawer.
Caution:
• When the lock is released, the money case extends out. Be careful.
• If the drawer is locked with the drawer key, it will not open. Use the
drawer key to open the drawer.
2) Pull out the drawer, and lift it to remove from the drawer cabinet.
3) Remove the screw from the drawer cabinet, and remove the wire
holder.
4) Remove the screw, and remove the drawer bottom plate.
Caution: Be careful not to catch the connector of the drawer solenoid
harness by the hole in the drawer cabinet.
5) Remove the screw, and remove the drawer solenoid.
Caution: When assembling, be sure to engage the drawer solenoid
plunger with the lock.
Lock
Drawer
Drawer
Wire holder
Screw
Drawer bottom
plate
plate
Screw
Screw
Screw
Screw
Drawer solenoid
Screw
Plunger
Lock
XE-A207/A217/A307
HARDWARE DESCRIPTION
– 26 –
CHAPTER 5. HARDWARE DESCRIPTION
1. HARDWARE SPECIFICATION OUTLINE
Item
Specification
CPU
16bit MPU H8S/2373 (Manufacturer: RENESAS) *33MHz
PRINTER
XE-A207/A217: Line thermal printer 384 dots/ 58mm wide x1 pc
XE-A307: Line thermal printer 384 dots/ 58mm wide x2 pcs
XE-A307: Line thermal printer 384 dots/ 58mm wide x2 pcs
SRAM
4Mbit (Manufacturer: RENESAS)
ROM
For programs
16Mbit Flash-ROM (Manufacturer: MACRONIX)
For data
16Mbit Flash-ROM (Manufacturer: MACRONIX)
DISPLAY
Main
STN LCD 160x64 dots (Manufacturer: GOWORLD) Screen size
(V.A) 85.00mm (H) x 40.00mm (V)
(A.A) 81.585mm (H) x 36.785mm (V)
(A.A) 81.585mm (H) x 36.785mm (V)
Customer
7seg LED x 7 digits
7seg LED x 10 digits (For Singapore)
KEY
Normal KEY
XE-A207/A307: MAX 66
Flat KEY
XE-A217: MAX 119
Mode S/W
N/A
I/F
USB
N/A
SD
1slot
Drawer
1port
*
Standard Drawer to be connected
RS232
1port [D-Sub x1]
EFT
N/A
BUZZER
PIEZO BUZZER
POWER SUPPLY
POWER TRANS
BATTERY
Back Up
Size AA battery x 2pcs
(Recommended: Toshiba, Hitachi Maxell, Panasonic)
DRAWER
Standard
XE-A207/A217/A307
HARDWARE DESCRIPTION
– 27 –
2. BLOCK DIAGRAM
FROM 16Mbit
#CS0 space
(H'000000
#CS0 space
(H'000000
䌾H'1FFFFF)
PROM 8Mbit
#CS2 space
#CS2 space
(H'400000
䌾H'4FFFFF)
D15
䌾D0 (16bit width)
D15
䌾D0 (16bit width)
D15
䌾D8 (8bit width)
#CS4
#CS0
#CS2
#CS5
3toLINE DECORDERS
74HCT138 x2
74HCT138 x2
P63
䌾60 (4bit width)
KEY STROBE
(max 13bit width)
(max 13bit width)
SINK DRIVER
SIO 2
BUFFER
74LV125A
74LV125A
SD CARD
RS232 DRIVER
ICL3243ECA
ICL3243ECA
RS232
D-SUB9
D-SUB9
RAM 16KByte
ROM LESS
ROM LESS
P46
䌾P45
SINK DRIVER
DRAWER
33MHz
SIO 4
PRINTER UNIT
PRINTER UNIT
#RESET
#POFF
#IRQ15
#RES
SIO 0
32.768kHz
3.3VB
RTC
3.3VB
SRAM 4Mbit
#CS4 space
(H'800000
#CS4 space
(H'800000
䌾H'8FFFFF)
SIO 3
LCD DRIVER
FROM 16Mbit
#CS1 space
(H'200000
#CS1 space
(H'200000
䌾H'3FFFFF)
D15
䌾D0 (16bit width)
#CS1
KEY RETURN
(10bit width)
(10bit width)
D7
䌾D0 (16bit width)
MOTOR DRIVER
LV8711T
#CS6
SIO 1
DA
T
A
B
U
S
ADDRESS B
U
S
P6
䌾
36P0
P1
䌾
31P0
PG4
P82
8bit D F/F
74HCT374
#CS6 space
74HCT374
#CS6 space
#CS5 space
(H'C00000)
4P1
䌾
61P*
#IRQ14
3.3VB
#RESET
PH3
D6
䌾D0 (16bit width)
D7
䌾D0 (16bit width)
D5
䌾D0 (16bit width)
#CS2
6bit D F/F
74LV174A
#CS2 space
(H'400000)
74LV174A
#CS2 space
(H'400000)
P97
䌾P90
P47,P46
H8S/2373
8bit OCTAL BUFFERS
74LV244A x1
74LV244A x1
#CS5 space
(H'A00000)
XE-A307 only
XE-A307 only
Each kind sensor input
MOTOR
DRIVER
DRIVER
LV8711T
6bit D F/F
74LV174A
74LV174A
(H'A00000)
XE-A307 only
XE-A307 only
#CS5
Click on the first or last page to see other XE-A217 (serv.man4) service manuals if exist.