DOWNLOAD Sharp XE-A217 (serv.man4) Service Manual ↓ Size: 6.82 MB | Pages: 44 in PDF or view online for FREE

XE-A207/A217/A307

MASTER RESET

– 14 –

This programming is chiefly performed when the ECR is shipped, installed, or serviced.

Master resetting clears the entire memory and resumes initial values.

Initial values of language can be selected one from following 5 kinds.

• 1 English

• 2 German

• 3 French

• 4 Spanish

• 5 Swedish

Master resetting can be accomplished by using the following “Proce-
dure 1” or “Procedure 2”.

■

1) Unplug the AC cord from the wall outlet.

2) Remove 2 dry batteries and wait for 1 minute.

3) Plug in the AC cord to the wall outlet.

4) Language selection menu is displayed. Push the corresponding

number key.

5) Set current date/time and push [TL/NS] key.

6) Set tax rate and push [TL/NS] key.

7) Set mode pass code and push [TL/NS] key.

8) Set manager pass code and push [TL/NS] key.

9) Set logo message and push [TL/NS] key.

10) REG mode screen is displayed.

11) Insert 2 dry batteries.

■

1) Unplug the AC cord from the wall outlet.

2) Push [receipt paper feed] key and [CL] key.

3) Plug in the AC cord to the wall outlet during the depression of above

2 keys.

4) Language selection menu is displayed. Push the corresponding

number key.

5) Set current date/time and push [TL/NS] key.

XE-A207/A217/A307

MASTER RESET

– 15 –

6) Set tax rate and push [TL/NS] key.

7) Set mode pass code and push [TL/NS] key.

8) Set manager pass code and push [TL/NS] key.

9) Set logo message and push [TL/NS] key.

10) REG mode screen is displayed.

Program resetting resumes the initial program without clearing memory.

This operation must be performed with batteries loaded.

1) Unplug the AC cord from the wall outlet.

2) Push [receipt paper feed] key and [0] key.

3) Plug in the AC cord to the wall outlet during the depression of above

2 keys.

4) MODE menu screen is displayed.

XE-A207/A217/A307

MAINTENANCE, DISASSEMBLY AND ASSEMBLY

– 16 –

This register is provided with the following consumable parts:

Caution:

•  Use the roll paper recommended by us only.

If other roll paper is used, paper clog or other trouble may occur.

Paper quality: High-quality heat-sensitive paper

Paper width: 57.5±0.5mm

Outer diameter: 81mm (Max.)

Paper thickness: 0.06 - 0.08mm

Paper weight: 52.3 - 64.0g/m

2

 (44 - 55kg/1,000 sheets/788 x 1,091mm)

•  Do not unpack roll paper until being used.

• Use enough care to handle roll paper. It is recommended top keep roll paper at normal temperature (20°C) and normal humidity (60%) in a dark

place. When attaching printed material to the note, etc, attach it to a margin (non-printed area) with paste.

•  Avoid storing under the following conditions, or discoloration of paper and printed characters may occur.

 - Place at high humidity (temperature above 40°C, humidity above 80%)
 - Dusty place

 - Place with direct sunlight

 - Place at high temperature of 60°C or above (Near a stove , a heater, or heat source such as lighted cigarette, or inside an automobile)

•  Avoid the following actions, or discoloration on the paper surface or printed characters may occur.

 - Scratching the paper surface with your nail, pencils, or other metal, or dropping or crashing roll paper to damage the surface.

 - Letting roll paper be in contact with rail or water or touching with a wet hand.

•  Avoid contact with the following items, plasticizing agent, organic solvent, and leather items, or discoloration on the paper surface or printed charac-

ters may occur.
- Highlighter pen, marker pen, mending tape, cellophane tape, adhesive agent, stamps, vermilion ink-pad, diazo copy (blue print), or rubber eraser.

- Bond, thinner, alcohol, benzene, hair dressing, oil, hand cream, vinyl chloride plastic file/bag/wrap, leather items

Part Name

Part Number

Outer Diameter

Remark

Roll paper

RL140T (5 rolls/pack)

70mm

Paper quality: Thermal paper

Paper width: 57.5±0.5mm

RL130T (5 rolls/pack)

80mm

Roll paper (High-storage type)

RL141T (5 rolls/pack)

70mm

RL131T (5 rolls/pack)

80mm

XE-A207/A217/A307

MAINTENANCE, DISASSEMBLY AND ASSEMBLY

– 17 –

When roll paper is nearly exhausted, red indication appears. Replace roll paper in such a case.

Caution: When roll paper is not installed to the printer or it is exhausted, the error message of “There is no roll paper. Set roll paper and press

[CLEAR].” is displayed and the operation is disabled.

In such a case, set roller paper and press [CLEAR] to clear the error. 

(The printer error code, “============” is printed.)

■

1) Remove the printer cover.

2) If recording paper is used, remove recording paper.

Press [Paper Feed] to feed recording paper by several lines, and cut
off the roll paper, and remove the winding shaft from the bearing.

Remove the roll paper holding guide from the winding shaft, and

remove recording paper.

Caution: Do not pull roll paper without press [Paper Feed]. It may dam-

age the printer head.

3) Lift the printer arm.

4) Remove the remaining roll paper.

■

3 Refer to page 12, "(10)INSTALLING A PAPER ROLL (XE-A207W/B,

XE-A217W/B)."

3 Refer to page 13, "(11)INSTALLING A PAPER ROLL (XE-A307)."

Roll paper holding guide

Winding 
shaft

Cut off

Bearing

Roll paper 
holding guide

Press this section in the arrow 
direction to remove the winding 
shaft holder.

Printer arm