DOWNLOAD Sharp XE-A217 (serv.man4) Service Manual ↓ Size: 6.82 MB | Pages: 44 in PDF or view online for FREE

CODE : 00Z

CONTENTS

Parts marked with "

" are important for maintaining the safety of the set. Be sure to replace these parts with specified

ones for maintaining the safety and performance of the set.

This document has been published to be used
for after sales service only.
The contents are subject to change without notice.

XEA207SM2E

XE-A207W/B

XE-A217W/B

XE-A307

XE-A207/A217/A307   LEAD-FREE SOLDER

■  LEAD-FREE SOLDER

The PWB’ s of this model employs lead-free solder. The “LF” marks indicated on the PWB’s and the Service Manual mean “Lead-Free” solder. The

alphabet following the LF mark shows the kind of lead-free solder. 

When repairing a lead-free solder PWB, use lead-free solder thread. Never use conventional lead solder thread, which may cause a breakdown or an accident. 

Since the melting point of lead-free solder thread is about 40°C higher than that of conventional lead solder thread, the use of the exclusive-use soldering iron is rec-

ommendable. 

Since the melting point of lead-free solder is about 220°C, which is about 40°C higher than that of conventional lead solder, and its soldering capacity is inferior to

conventional one, it is apt to keep the soldering iron in contact with the PWB for longer time. This may cause land separation or may exceed the heat-resistive tem-

perature of components. Use enough care to separate the soldering iron from the PWB when completion of soldering is confirmed. 

Since lead-free solder includes a greater quantity of tin, the iron tip may corrode easily. Turn ON/OFF the soldering iron power frequently.  

If different-kind solder remains on the soldering iron tip, it is melted together with lead-free solder. To avoid this, clean the soldering iron tip after com-
pletion of soldering work. 

If the soldering iron tip is discolored black during soldering work, clean
and file the tip with steel wool or a fine filer. 

5mm

Lead-Free

Solder composition 
code (Refer to the 
table at the right.)

Solder composition

Sn-Ag-Cu

Sn-Ag-Bi
Sn-Ag-Bi-Cu

Sn-Zn-Bi

Sn-In-Ag-Bi

Sn-Cu-Ni

Sn-Ag-Sb

Bi-Sn-Ag-P
Bi-Sn-Ag

a

b

z

i

n

s

p

Solder composition code

a

THERE IS A RISK OF EXPLOSION IF THE BATTERY

IS REPLACED BY AN INCORRECT TYPE.

PROPERLY DISPOSE OF USED BATTERIES ACCORDING 

TO THE INSTRUCTIONS.

n

Risk of explosion if battery is replaced by an incorrect type.

Dispose of batteries according to the instructions.

n

Do not leave the unit with the battery discharged for more than one month. 

It will shorten the battery life. 

If the unit is left unused for a long period, be sure to charge the battery fully. 

Also note that the battery must be charged periodically (once a month) because it will discharge naturally. 

XE-A207/A217/A307

SPECIFICATIONS

– 1 –

*

Specifications and appearance are subject to change without notice

for improvement.

*

Specifications and appearance are subject to change without notice

for improvement.

Model

• XE-A207W/XE-A207B

• XE-A217W/XE-A217B

Dimensions

335 (W) x 424 (D) x 326 (H) mm

Weight

Approx. 11.0 kg

Power Source

Official (nominal) voltage and frequency

Power 
Consumption

Stand-by

•  9 W (When the official voltage is

220 to 230 V, 50 Hz/60 Hz) 

• 10 W (When the official voltage

is 230 to 240 V, 50 Hz)

Operating

• 33 W (max.) (When the official

voltage is 220 to 230 V, 50 Hz/

60 Hz)

•  34 W (max.) (When the official 

voltage is 230 to 240 V, 50 Hz)

Working 
Temperature

0 to 40 °C (32 to 104 °F)

Humidity

10 % to 90 %

Display

Operator display

LCD display with Tilt mechanism
160 (W) x 64 (H) (dots) 

Customer display 7-segment display

Printer

Type

Drop-in thermal printer

Printing speed

Approx. 15 lines/second

Printing capacity

30 digits

Other functions

•  Receipt (ON-OFF) function 

• Compression print for an elec-

tronic journal

Logo

Graphic logo 
printing

Size

360 pixel (W) x 130 pixel (H)

L o g o   m e s s a g e
printing

L o g o   m e s sa g e   fo r   th e  r e c e i p t
(max. 30 characters x 6 lines)

Paper Roll

Width

58 mm

Max. diameter

80 mm

Quality

High quality (0. 06 to 0.08 mm
thickness)

Cash Drawer

5 slots for bills and 8 for coin denominations

Accessories

BASIC USER 
MANUAL

1 copy

Standard key 
sheet

1 (placed under keyboard cover)
for XE-A217W/XE-A217Bonly

Text preset key 
sheet

1 (placed under keyboard cover)
for XE-A217W/XE-A217B only

Paper roll

1

Drawer lock key

2

Fixing angle 
bracket

1

Model

XE-A307

Dimensions

360 (W) x 425 (D) x 330 (H) mm

Weight

Approx. 12.0 kg

Power Source

Official (nominal) voltage and frequency

Power 
Consumption

Stand-by

• 9.8 W (When the official voltage

is 220 to 230 V, 50 Hz/60 Hz)

• 9.3 W (When the official voltage

is 230 to 240 V, 50 Hz)

Operating

•  37.8 W (max.) (When the official

voltage is 220 to 230 V, 50 Hz/

60 Hz)

•  35.1 W (max.) (When the official

voltage is 230 to 240 V, 50 Hz)

Working 
Temperature

0 to 40 °C (32 to 104 °F)

Humidity

20 % to 90 %

Display

Operator display

LCD display with Tilt mechanism 
160 (W) x 64 (H) (dots)

Customer display 7-segment LED display

Printer

Type

Two-station thermal printer

Printing speed

Approx. 12 lines/second

Printing capacity

30 digits each for receipt/
journal paper

Other functions

•  Receipt (ON-OFF) function

•  Compression print for the journal

and electronic journal

•  Receipt and journal independent

paper feed function

Logo

Graphic logo 
printing

Size

360 pixel (W) x 130 pixel (H)
Area of black must be less than
35% of all area.

L o g o   m e s s a g e
printing

L o g o   m e s s a g e   fo r   th e   r e c e ip t
(max. 30 characters x 6 lines)

Paper Roll

Width

57.5 ± 0.5 mm

Max. diameter

80 mm

Quality

Hi gh  q ua lity   ( 0.06   to  0 .08  m m
thickness)

Cash Drawer

5 slots for bills and 8 for coin denominations

Accessories

Basic User 
Manual

1 copy

Paper roll

2

Take-up spool

1

Paper holding 
plate

1

Drawer lock key

2

Fixing angle 
bracket

1

Battery caution 
label

1

XE-A207/A217/A307

SPECIFICATIONS

– 2 –

■

■

Printer cover

Operator Display

Keyboard

Drawer

Drawer lock

SD card slot

Printer cover

Operator Display

Keyboard

Drawer

Drawer lock

SD card slot

Printer cover

Keyboard

Drawer

Drawer lock

SD card slot

Operator Display

Customer display

RS232C

SK1-1

Drawer lock key: 2

Paper roll: 1 (XE-A207X/B,XE-A217W/B)
Paper roll: 2 (XE-A307)

BASIC USER MANUAL: 1

 Standard key sheet: 1 
(for XE-A217W/A217B (placed under keyboard cover))

Text preset key sheet: 1
(for XE-A217W/A217B (placed under keyboard cover))