Sharp XE-A213 (serv.man7) FAQ ▷ View online
You have a key marked MA please insert this into the mode lock to start.
Turn the MA Key to the PGM position.
Turn the MA Key to the PGM position.
Enter ST.
Enter 6, using the numeric buttons
Enter 6, using the numeric buttons
Enter the X button.
Using the numeric buttons enter 11000111
Enter ST.
Using the numeric buttons enter 11000111
Enter ST.
Enter TL/NS to complete
Return the MA key to the REG position to operate
Q. The sales figures are not resetting, they are continually accumulating.
A. To reset the various sales report the procedure is to Enter the . (decimal point) key before
the selected report, if the . (decimal point) key is not Entered the sales totals will not be
the selected report, if the . (decimal point) key is not Entered the sales totals will not be
reset.
Example for Z1 General Report
Example for Z1 General Report
Turn Key to X1/Z1
Press . (decimal point)
Press TL/NS
Press TL/NS
Q. Can I set Zero Skip in reports to save paper?
A. You have a key marked MA please insert this into the mode lock to start.
Turn the MA Key to the PGM position.
Enter ST.
Enter ST.
Enter 6, using the numeric buttons
Enter the X button.
Using the numeric buttons enter 11000111
Enter the X button.
Using the numeric buttons enter 11000111
Enter ST.
Enter TL/NS to complete
Enter TL/NS to complete
Return the MA key to the REG position to operate
Q. Can you tell me how to program the rate for the VAT1.
A. You have a key marked MA insert this into the mode lock to start.
Turn the MA Key to the PGM position.
Turn the MA Key to the PGM position.
Enter ST
Enter 9, using the numeric buttons
Enter X
Enter 9, using the numeric buttons
Enter X
Enter 1 using the numeric buttons (Auto Vat rate)
Enter X
Enter X
Enter 17.5
Enter ST
Enter ST
Enter TL to complete
Return the MA key to the REG position to operate
Return the MA key to the REG position to operate
Q. Can you tell me how to delete a VAT1 rate
A. You have a key marked MA insert this into the mode lock to start.
Turn the MA Key to the PGM position.
Enter ST
Turn the MA Key to the PGM position.
Enter ST
Enter 9 (from the numeric buttons)
Enter X
Enter X
Enter 1
Enter X
Enter X
Enter
Enter TL/NS
Q. Can you tell me how to set my Department to be Auto VAT1.
A. You have a key marked MA insert this into the mode lock to start.
Turn the MA Key to the PGM position.
Enter Dept number (using Numeric Keys)
Turn the MA Key to the PGM position.
Enter Dept number (using Numeric Keys)
Press Dept #
Enter ST
Enter ST
Enter ST
Enter ST
Enter ST
Enter the [00] key to change to YES
Enter ST
Enter TL/NS
Enter ST
Enter TL/NS
Return the MA key to the REG position to operate
Q. Can you tell me how to enter training mode and then cancel it afterwards?
A. You have a key marked MA please insert this into the mode lock to start.
Turn the MA Key to the PGM position.
Turn the MA Key to the PGM position.
Enter ST.
Enter 86, using the numeric buttons
Enter 86, using the numeric buttons
Enter the X button.
Enter the chosen training Clerk Number (To cancel training clerk enter 0)
Enter ST.
Enter the chosen training Clerk Number (To cancel training clerk enter 0)
Enter ST.
Enter TL/NS to complete
Return the MA key to the REG position to operate
Q. Can you tell me how to prevent the REFUND button in REG position to operate
A. You have a key marked MA please insert this into the mode lock to start.
Turn the MA Key to the PGM position.
Enter ST.
Enter 5, using the numeric buttons
Enter ST.
Enter 5, using the numeric buttons
Enter the X button.
Enter 00000101, using the numeric buttons
Enter 00000101, using the numeric buttons
Enter ST.
Enter TL/NS to complete.
Enter TL/NS to complete.
Return the MA key to the REG position to operate
Q. Can you tell me how to make a PLU an open entry type?
A. You have a key marked MA insert this into the Mode lock.
Turn the mode lock to the PGM position.
Press the PLU (required for programming).
Press ST
Press the PLU (required for programming).
Press ST
Press ST
Press ST
Press ST
Using the numeric buttons press 00. (Until subdept appears).
Press ST
Press TL/NS to finish.
Press ST
Press TL/NS to finish.
Q. Can you tell me how to program a preset price and name to a PLU?
A. You have a key marked MA insert this into the Mode lock.
Turn the mode lock to the PGM position.
Press the PLU (to program).
Using the numeric buttons press 00
Press the PLU (to program).
Using the numeric buttons press 00
Using the text buttons enter the name.
Press ST.
Press ST.
Using the numeric buttons enter the price (without decimal point).
Press ST
Press TL/NS to finish.
Press ST
Press TL/NS to finish.
Return the mode lock to the REG position.
Q. Can you tell me how to change a PLU key into a Department Key?
A. You have a key marked MA insert this into the Mode lock.
Turn the key to the PGM position.
Turn the key to the PGM position.
Press the PLU key you wish to change
Press [00]
Press [00]
Enter text for Key Name
Press ST
Press ST
Press ST
Enter Department Number
Press ST
Enter Department Number
Press ST
Press [00] until SUBDEPT is shown on the display
Press ST
Press ST
Press ST/TL
Q. Can you tell me how to program a name and price to a Department
A. You have a key marked MA insert this into the Mode lock.
Turn the key to the PGM position.
Press the DEPARTMENT button.
Press the DEPARTMENT button.
Using the numeric buttons enter the 00
Using the text buttons enter the name (max 12 characters).
Press ST.
Using the text buttons enter the name (max 12 characters).
Press ST.
Using the numeric buttons enter the price (without decimal point).
Press TL/NS to finish.
Return the mode lock to the REG position.
Return the mode lock to the REG position.
Q. Why does the error message OVER LIMIT appear when I press TL/NS?
You have a key marked MA insert this into the Mode lock.
Turn the mode lock to the PGM position.
Using the numeric buttons enter 0 0 8
Turn the mode lock to the PGM position.
Using the numeric buttons enter 0 0 8
Press the X button.
Press ST.
Press ST.
Press TL/NS to finish.
Return the mode lock to the REG position
Return the mode lock to the REG position
Q. I am unable to use my register after the error message OVER LIMIT.
A. Turn to MGR Position
Finalise the current transaction by pressing the TL/NS key
Finalise the current transaction by pressing the TL/NS key
Return the mode lock to the REG position
Q. Can you tell me how to change from receipt to journal printing?
A. You have a key marked MA, insert this into the Mode lock.
Turn the key to the PGM position.
Press ST.
Enter 6 (Using the numeric buttons)
Press ST.
Enter 6 (Using the numeric buttons)
Press the X button.
Using the numeric buttons enter 01000111
Using the numeric buttons enter 01000111
Press ST.
Press TL/NS to finish.
Return the mode lock to the REG position.
Press TL/NS to finish.
Return the mode lock to the REG position.
Q. Can you tell me how to change from Journal to Receipt printing?
A. You have a key marked MA, insert this into the Mode lock.
Turn the key to the PGM position.
Press ST.
Enter 6 (Using the numeric buttons)
Press ST.
Enter 6 (Using the numeric buttons)
Press the X button.
Using the numeric buttons enter 11000111
Using the numeric buttons enter 11000111
Press ST.
Press TL/NS to finish.
Return the mode lock to the REG position.
Press TL/NS to finish.
Return the mode lock to the REG position.
Q. Can you tell me how to program a clerk name?
A. You have a key marked MA insert this into the Mode lock.
Turn the mode lock to the PGM position.
Press ST
Using the numeric buttons enter 5
Press ST
Using the numeric buttons enter 5
Press the decimal point.
Using the numeric buttons enter the clerk number (1 - 25).
Using the numeric buttons enter the clerk number (1 - 25).