Sharp XE-A207 (serv.man3) Service Manual ▷ View online
CODE : 00Z
SERVICE MANUAL
CONTENTS
Parts marked with "
" are important for maintaining the safety of the set. Be sure to replace these parts with specified
ones for maintaining the safety and performance of the set.
This document has been published to be used
for after sales service only.
The contents are subject to change without notice.
for after sales service only.
The contents are subject to change without notice.
XEA207SM2E
LEAD-FREE SOLDER MODEL
ELECTRONIC CASH REGISTER
XE-A207
XE-A217
XE-A217
MODEL
XE-A307
CHAPTER 1. SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
CHAPTER 2. INSTALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
CHAPTER 3. MASTER RESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
CHAPTER 4. MAINTENANCE, DISASSEMBLY AND ASSEMBLY . . 16
CHAPTER 5. HARDWARE DESCRIPTION . . . . . . . . . . . . . . . . . . . 26
CHAPTER 6. DIAGNOSTIC PROGRAM DESCRIPTION . . . . . . . . 30
CHAPTER 7. PWB LAYOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
CHAPTER 8. CONNECTOR PIN LAYOUT . . . . . . . . . . . . . . . . . . . 40
XE-A207W/B
XE-A217W/B
XE-A307
XE-A207/A217/A307 LEAD-FREE SOLDER
■ LEAD-FREE SOLDER
The PWB’ s of this model employs lead-free solder. The “LF” marks indicated on the PWB’s and the Service Manual mean “Lead-Free” solder. The
alphabet following the LF mark shows the kind of lead-free solder.
Example:
(1) NOTE FOR THE USE OF LEAD-FREE SOLDER THREAD
When repairing a lead-free solder PWB, use lead-free solder thread. Never use conventional lead solder thread, which may cause a breakdown or an accident.
Since the melting point of lead-free solder thread is about 40°C higher than that of conventional lead solder thread, the use of the exclusive-use soldering iron is rec-
ommendable.
(2) NOTE FOR SOLDERING WORK
Since the melting point of lead-free solder is about 220°C, which is about 40°C higher than that of conventional lead solder, and its soldering capacity is inferior to
conventional one, it is apt to keep the soldering iron in contact with the PWB for longer time. This may cause land separation or may exceed the heat-resistive tem-
perature of components. Use enough care to separate the soldering iron from the PWB when completion of soldering is confirmed.
Since lead-free solder includes a greater quantity of tin, the iron tip may corrode easily. Turn ON/OFF the soldering iron power frequently.
If different-kind solder remains on the soldering iron tip, it is melted together with lead-free solder. To avoid this, clean the soldering iron tip after com-
pletion of soldering work.
pletion of soldering work.
If the soldering iron tip is discolored black during soldering work, clean
and file the tip with steel wool or a fine filer.
and file the tip with steel wool or a fine filer.
5mm
Lead-Free
Solder composition
code (Refer to the
table at the right.)
code (Refer to the
table at the right.)
<Solder composition code of lead-free solder>
Solder composition
Sn-Ag-Cu
Sn-Ag-Bi
Sn-Ag-Bi-Cu
Sn-Ag-Bi-Cu
Sn-Zn-Bi
Sn-In-Ag-Bi
Sn-Cu-Ni
Sn-Ag-Sb
Bi-Sn-Ag-P
Bi-Sn-Ag
Bi-Sn-Ag
a
b
z
i
n
s
p
Solder composition code
a
CAUTIONS
THERE IS A RISK OF EXPLOSION IF THE BATTERY
IS REPLACED BY AN INCORRECT TYPE.
PROPERLY DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS.
CAUTIONS
n
Risk of explosion if battery is replaced by an incorrect type.
Dispose of batteries according to the instructions.
n
Do not leave the unit with the battery discharged for more than one month.
It will shorten the battery life.
If the unit is left unused for a long period, be sure to charge the battery fully.
Also note that the battery must be charged periodically (once a month) because it will discharge naturally.
XE-A207/A217/A307
SPECIFICATIONS
– 1 –
CHAPTER 1. SPECIFICATIONS
1. SPECIFICATIONS
XE-A207W/A207B, XE-A217W/A217B
*
Specifications and appearance are subject to change without notice
for improvement.
XE-A307
*
Specifications and appearance are subject to change without notice
for improvement.
Model
• XE-A207W/XE-A207B
• XE-A217W/XE-A217B
Dimensions
335 (W) x 424 (D) x 326 (H) mm
Weight
Approx. 11.0 kg
Power Source
Official (nominal) voltage and frequency
Power
Consumption
Consumption
Stand-by
• 9 W (When the official voltage is
220 to 230 V, 50 Hz/60 Hz)
• 10 W (When the official voltage
is 230 to 240 V, 50 Hz)
Operating
• 33 W (max.) (When the official
voltage is 220 to 230 V, 50 Hz/
60 Hz)
• 34 W (max.) (When the official
voltage is 230 to 240 V, 50 Hz)
Working
Temperature
Temperature
0 to 40 °C (32 to 104 °F)
Humidity
10 % to 90 %
Display
Operator display
LCD display with Tilt mechanism
160 (W) x 64 (H) (dots)
160 (W) x 64 (H) (dots)
Customer display 7-segment display
Printer
Type
Drop-in thermal printer
Printing speed
Approx. 15 lines/second
Printing capacity
30 digits
Other functions
• Receipt (ON-OFF) function
• Compression print for an elec-
tronic journal
Logo
Graphic logo
printing
printing
Size
360 pixel (W) x 130 pixel (H)
L o g o m e s s a g e
printing
printing
L o g o m e s sa g e fo r th e r e c e i p t
(max. 30 characters x 6 lines)
(max. 30 characters x 6 lines)
Paper Roll
Width
58 mm
Max. diameter
80 mm
Quality
High quality (0. 06 to 0.08 mm
thickness)
thickness)
Cash Drawer
5 slots for bills and 8 for coin denominations
Accessories
BASIC USER
MANUAL
MANUAL
1 copy
Standard key
sheet
sheet
1 (placed under keyboard cover)
for XE-A217W/XE-A217Bonly
for XE-A217W/XE-A217Bonly
Text preset key
sheet
sheet
1 (placed under keyboard cover)
for XE-A217W/XE-A217B only
for XE-A217W/XE-A217B only
Paper roll
1
Drawer lock key
2
Fixing angle
bracket
bracket
1
Model
XE-A307
Dimensions
360 (W) x 425 (D) x 330 (H) mm
Weight
Approx. 12.0 kg
Power Source
Official (nominal) voltage and frequency
Power
Consumption
Consumption
Stand-by
• 9.8 W (When the official voltage
is 220 to 230 V, 50 Hz/60 Hz)
• 9.3 W (When the official voltage
is 230 to 240 V, 50 Hz)
Operating
• 37.8 W (max.) (When the official
voltage is 220 to 230 V, 50 Hz/
60 Hz)
• 35.1 W (max.) (When the official
voltage is 230 to 240 V, 50 Hz)
Working
Temperature
Temperature
0 to 40 °C (32 to 104 °F)
Humidity
20 % to 90 %
Display
Operator display
LCD display with Tilt mechanism
160 (W) x 64 (H) (dots)
160 (W) x 64 (H) (dots)
Customer display 7-segment LED display
Printer
Type
Two-station thermal printer
Printing speed
Approx. 12 lines/second
Printing capacity
30 digits each for receipt/
journal paper
journal paper
Other functions
• Receipt (ON-OFF) function
• Compression print for the journal
and electronic journal
• Receipt and journal independent
paper feed function
Logo
Graphic logo
printing
printing
Size
360 pixel (W) x 130 pixel (H)
Area of black must be less than
35% of all area.
Area of black must be less than
35% of all area.
L o g o m e s s a g e
printing
printing
L o g o m e s s a g e fo r th e r e c e ip t
(max. 30 characters x 6 lines)
(max. 30 characters x 6 lines)
Paper Roll
Width
57.5 ± 0.5 mm
Max. diameter
80 mm
Quality
Hi gh q ua lity ( 0.06 to 0 .08 m m
thickness)
thickness)
Cash Drawer
5 slots for bills and 8 for coin denominations
Accessories
Basic User
Manual
Manual
1 copy
Paper roll
2
Take-up spool
1
Paper holding
plate
plate
1
Drawer lock key
2
Fixing angle
bracket
bracket
1
Battery caution
label
label
1
XE-A207/A217/A307
SPECIFICATIONS
– 2 –
2. EXTERNAL VIEW
■
FRONT VIEW
XE-A207W/A207B
XE-A217W/A217B
XE-A307
■
Rear view
3. ACCESSORIES
Printer cover
Operator Display
Keyboard
Drawer
Drawer lock
SD card slot
Printer cover
Operator Display
Keyboard
Drawer
Drawer lock
SD card slot
Printer cover
Keyboard
Drawer
Drawer lock
SD card slot
Operator Display
Customer display
RS232C
SK1-1
Drawer lock key: 2
Paper roll: 1 (XE-A207X/B,XE-A217W/B)
Paper roll: 2 (XE-A307)
Paper roll: 2 (XE-A307)
BASIC USER MANUAL: 1
Standard key sheet: 1
(for XE-A217W/A217B (placed under keyboard cover))
(for XE-A217W/A217B (placed under keyboard cover))
Text preset key sheet: 1
(for XE-A217W/A217B (placed under keyboard cover))
(for XE-A217W/A217B (placed under keyboard cover))