Sharp XE-A207 (serv.man2) Service Manual ▷ View online
XE-A207/A217/A307
MASTER RESET
– 2 –
6) Set tax rate and push [TL/NS] key.
7) Set mode pass code and push [TL/NS] key.
8) Set manager pass code and push [TL/NS] key.
9) Set logo message and push [TL/NS] key.
10) REG mode screen is displayed.
2. PROGRAM RESET
Program resetting resumes the initial program without clearing memory.
This operation must be performed with batteries loaded.
1) Unplug the AC cord from the wall outlet.
2) Push [receipt paper feed] key and [0] key.
3) Plug in the AC cord to the wall outlet during the depression of above
2 keys.
4) MODE menu screen is displayed.
XE-A207/A217/A307
PGM MODE
– 3 –
CHAPTER 2. PGM MODE
1. MAJOR KEYS USED IN THE PGM MODE
1-1. BASIC OPERATION KEY
1-2. TEXT INPUT MODE
KEY
NAME
Action
2
CURSOR UP
Move cursor to up (1 character)
4
CURSOR DOWN
Move cursor to down (1 character)
3
CURSOR RIGHT
Move cursor to right (1 character)
1
CURSOR LEFT
Move cursor to left (1 character)
P
2
PAGE UP
Move cursor to up (1 page)
P
4
PAGE DOWN
Move cursor to down (1 page)
DEL
DELETE
Delete (Delete 1 record)
CL
CLEAR
Clear numeric entry or error message
CANCEL
CANCEL
Operation cancel & back to previous menu
TL
ALL ENTER
All entry terminate
ST
SELECTABLE VALUE LIST
• Show the selectable value list
• Select item and hide the list (only toggle list)
• Select item and hide the list (only toggle list)
• (DECIMAL POINT) TOGGLE SELECT
Selection switching (On the entry item and selectable value list)
NEXT
NEXT RECORD
Move to the same item of the next record. In case of detail setting of DEPT/PLU/EAN can be
used. If next record does not be exist, display is back to previous menu.
used. If next record does not be exist, display is back to previous menu.
PREV.
PREVIOUS RECORD
Move to the same item of the previous record. Same as NEXT RECORD operation.
KEY
Action
DEL
Delete (Delete 1 character)
DC
Change character entry mode <Double/Normal>
SHIFT
Change character entry mode <Capital/Small>
CAPS
Change CAPS mode <CAPS ON/OFF>
00
Character code entry
• (DECIMAL POINT)
Reverse rotation (for Multi tapping entry)
TEXT
Change character mode (for Multi tapping entry)
XE-A207/A217/A307
PGM MODE
– 4 –
1-3. KEY LAYOUT
XE-A207W/A207B
XE-A217W/A217B
2. CHARACTER ENTRY METHOD
2-1. MOBILE PHONE METHOD (XE-A207W/A207B ONLY)
■
Entering alphanumeric characters
To enter a character, simply press a corresponding character key on the programming keyboard.
To enter “A”, press the “8” key.
To enter “B”, press the “8” key twice.
To enter “C”, press the “8” key three times.
2-2. PC KEYBOARD METHOD (XE-A217W/A217B ONLY)
To enter a character using the primary character are located on PLU direct key area.
XE-A207/A217/A307
PGM MODE
– 5 –
3. GENERAL
■
PURPOSE
The PGM mode programming is chiefly used when installing the ECR or programming the functions that the manager has selected.
■
OPERATION
1) Press the [MODE] key. The following mode screen is displayed.
2) Move the cursor to [6 PGM MODE] by using the [
2 ] or [ 4 ] key, and press the [TL/NS] key. Or Enter the [6] key and press the [TL/NS] key.
■
MENU LIST
Tree1
Tree2
Tree3
Tree4
1
READING
1
DEPARTMENT
2
PLU(XE-A207W/B, XE-A217W/B)
PLU/EAN(XE-A307)
1
RANGE
2
PICK UP
1
NEW PICKING
2
LAST PICKING
3
EAN OTHERS
3
FUNCTIONS
4
MEDIA
5
FUNCTION TEXT
6
CLERK
7
MANAGER
8
MODE PASS CODE
9
TRAINING CLK
10
OPTIONAL
11
REPORT
12
MESSAGE
13
DEVICE CONFIG
14
TAX
15
AUTO KEY
16
ROM VERSION
2
SETTING
1
ARTICLE
1
DEPARTMENT
01
DEPT.01
-
99
DEPT.99
2
PLU
(XE-A207W/B, XE-A217W/B)
(XE-A207W/B, XE-A217W/B)
00001
PLU00001
-
99999
PLU99999
PLU/EAN(XE-A307)
00001
PLU00001
-
99999
PLU99999
3
PLU RANGE
4
EAN NON-PLU(XE-A307 ONLY)
5
EAN DELETE(XE-A307 ONLY)
