Sharp XE-A201 (serv.man6) User Manual / Operation Manual ▷ View online
5
[Card Title]
This shows the name of the current setting item.
This shows the name of the current setting item.
[Apply Button]
Press this button to save the data temporarily and go to the next screen after modifying the setting.
Press this button to save the data temporarily and go to the next screen after modifying the setting.
[Back Button]
Press this button to go back to the previous card.
Press this button to go back to the previous card.
6
Serial Communication between ECR and PC
You can send and receive the setting data between ECR and PC through the serial communication.
There is no need for any communication setup on the ECR.
Hardware requirements for the serial communication is as follows:
There is no need for any communication setup on the ECR.
Hardware requirements for the serial communication is as follows:
- A personal computer
- A RS232C cable (attached to ECR)
- A RS232C cable (attached to ECR)
Connection of RS232C Cable APLD cable
7
Graphic Logo Maker
How to create a graphic logo
1. Select a graphic logo in the "Graphic Logo box"
2. Click the [Select] button.
The selected logo is displayed in the Graphic Logo Printing sample window.
When you use this program for the first time, an arrowed cross appears.
When you use this program for the first time, an arrowed cross appears.
3. Change the position of the logo with the mouse, if necessary.
4. Enter the Texts 1-3.
5. Select the Font and the character size.
6. Change the position of the texts with the mouse, if necessary.
7. To change the size of the Graphic Logo Printing sample window, click the [Zoom in] or [Zoom out]
button.
button.
8. Click the [Save / Back] button.
8
(when you have zoomed in)
*Black Rate
The Black Rate is the rate of black parts in the printed area. Make sure that the Black Rate is 35% or
lower.
Graphics or characters you have created with Graphic Logo Maker are printed as a set of tiny dots called
pixels.
If a horizontal line of pixels includes more than 50 black dots, a figure is shown in the parenthesis,
besides the Black Rate.
This figure indicates the Local Black Rate, the rate of black pixels in the line in question and the nine lines
below the line.
Adjust your graphics so that the Local Black Rate should be 49% or lower.
The Black Rate is the rate of black parts in the printed area. Make sure that the Black Rate is 35% or
lower.
Graphics or characters you have created with Graphic Logo Maker are printed as a set of tiny dots called
pixels.
If a horizontal line of pixels includes more than 50 black dots, a figure is shown in the parenthesis,
besides the Black Rate.
This figure indicates the Local Black Rate, the rate of black pixels in the line in question and the nine lines
below the line.
Adjust your graphics so that the Local Black Rate should be 49% or lower.
*To Use your Own Logo
Click on the first or last page to see other XE-A201 (serv.man6) service manuals if exist.