Sharp XE-A107 (serv.man2) Service Manual ▷ View online
1-4
2) PAPER
Paper type
Bond paper
Paper roll width
57.5 ±0.5mm
Paper roll diameter
φ80mm
Paper Thickness
0.06 to 0.085mm
Paper weight
47 to 64g/m
2
6. DRAWER
1) DRAWER BOX AND DRAWER
Material
Plastic
Bell
--
Release lever
Standard equipment: situated at the
bottom
bottom
Drawer open sensor
--
2)
MONEY CASE
Separation from the drawer
Disallowed
Separation of the bill
compartments from the coin
compartments
compartments from the coin
compartments
Allowed
Bill separator
-
Number of compartments
3B/6C (Vmodel)
[3] XE-A1BT
Installable model
XE-A147 only
Power consumption
7.2V / 1265mh
Type
Nickel Metal Hydride (Ni-MH) battery
Re-chargeable
Re-chargeable
2-1
CHAPTER 2. OPTIONS
1. OPTIONS
Product name
Model
Description
Optional battery
XE-A1BT
Optional battery
(for XE-A147)
2. SERVICE OPTIONS
Parts code
Price
rank
Description
LANGK7612BHZZ
AF
Fix angle A
(for
tumble prevision
)
LANGK7613BHZZ
AN
Fix angle B
(for
tumble prevision
)
XHBS730P06000
AC
Screw (for set the fix angle)
3. SUPPLIES
Item
Parts code
Price
rank
Description
Roll paper
DPAPR1025CSZZ
AV
5 Rolls / Pack
(For XE-A107)
INK Roller
NROLR1022RCZB
AZ
Ink roller
(For XE-A107)
Thermal
paper
paper
TPAPR6656RC05
BA
5 Rolls / Pack
(For XE-A137 /
XE-A147)
*Handled as service parts
4. SPECIAL SERVICE TOOLS
Parts code
Price
rank
Description
UKOG-2374RCZZ
AV
RS232C loop back test tool
(For XE-A147)
CHAPTER 3. MASTER RESET
Master reset:
Clears all the memory and initializes each preset parameter.
The master reset should be performed by using the following
procedure.
procedure.
1. Turn off the power (Power OFF). (See Note 1))
2. Let the ECR be without the memory back up battery.
3. Turn the mode switch to the others of Power-off position.
4. Turn on the power (Power ON). (See Note 2))
When the master rest is completed, the buzzer sounds
intermittently three times.
intermittently three times.
5. Attach the memory back up battery to the ECR.
The master reset can also be accomplished in the following
case. (See Note 3))
case. (See Note 3))
Note 1) Power OFF:
Means disconnecting the AC power supply to the
machine. (Specifically, unplugging the machine)
machine. (Specifically, unplugging the machine)
Note 2) Power ON:
Means connecting the AC power to the ma-chine.
(Specifically, plugging in the machine)
(Specifically, plugging in the machine)
Note 3) In case a power failure occurs when the machine
has no battery installed, the master reset operation is
automatically performed after the power has been
restored.
automatically performed after the power has been
restored.
4-1
CHAPTER 4. HARDWARE DESCRIPTION & OPERATION PRICIPLE
1. OUTLINE
XE-A107
XE-A137,XE-A147
CPU
8bit MASK CPU
uPD780023AGC *4.19MHz
MASK ROM Built in (For Program)
uPD780023AGC *4.19MHz
MASK ROM Built in (For Program)
32bit CPU
MB9AF116N *16MHz
FLASH ROM Built in (For Program)
MB9AF116N *16MHz
FLASH ROM Built in (For Program)
PRINTER
58mm Print wheel type
58mm Thermal Printer
Rolling up
EU/Oceania/Asia/
ME/Africa
ME/Africa
Yes
None
SRAM
None
1Mbit(128kByte x8)
ROM
For Program
MASK ROM in CPU
FLASH ROM in CPU
DISPLAY
7segments LED
Display
digits
digits
EU/Oceania/Asia/
ME/Africa
ME/Africa
9 digits
KEY
Normal KEY: 30key
Mode S/W
5 steps rotary type
I/F
USB
None
SD
None
1slot
DRAWER
1port (For Standard drawer only. There is no optional drawer port)
RS232
None
1port ( for XE-A147)
EFT
None
POWER SUPPLY
AC adapter for XE-A107
AC adapter for XE-A137or XE-A147
BATTERY
MEMORY BACK UP
LR6 (AA size)
OPTIONAL
OPERATION BATTERY
OPERATION BATTERY
None
Option: XE-A1BT (XE-A147only)
DRAWER
Standard: 1 unit
4-2
2. Block diagram
1) XE-A147 / XE-A137
1) XE-A147 / XE-A137
2) XE-A107
Click on the first or last page to see other XE-A107 (serv.man2) service manuals if exist.