Sharp XE-A101 Handy Guide ▷ View online
XE-A101
SALES/SUPPORT GUIDE.
FUNCTIONALITY
ü 80 PLU's (Items can be programmed for automatic pre-set price entry) (1to 10
pre-programmed)
ü 8 Departments.
ü No Clerks/Cashiers on this machine. (prevents non sign-on problem)
ü Secret Code for programming (See possible call quires section)
ü Euro Compatible. (Can switch to Euro Compatibility when necessary).
ü Automatic price conversion by Euro status change. (Automatically changes the
programmed prices in the machine to Euro equivalent)
ü Error Escape function to quit a transaction.
ü Other standard functions include: -
ü 4 rates of VAT or TAX
ü Percentage Calculations
ü Refund Entries
ü Correction Methods. (direct void/Indirect void and Void Mode
ü Paid out entries
ü Received on Account entries
ü Percentage Calculations
ü Refund Entries
ü Correction Methods. (direct void/Indirect void and Void Mode
ü Paid out entries
ü Received on Account entries
ü The above functions are separately recorded for reports, which can then be
printed out.
ü Range of daily reading and resetting reports and Periodic reading and resetting
report.
PRINTER
ü Printer Model M-31
ü Printer ink roller model IR30
ü Printer ink roller model IR30
ü Single ply paper only.
ü Receipt or Journal type print select (default to Journal type)
ü The Paper size is 57.5mm wide, max diameter 80.
ü Receipt or Journal type print select (default to Journal type)
ü The Paper size is 57.5mm wide, max diameter 80.
ü The XE-A101 does not have logo stamp facility (therefore there is no facility for
printing the shop name).
ü Manual Cutter
DRAWER
ü The Drawer Specification = 3 bill 5 coin.
ü There is a Mechanical Drawer release lever. (In the event of power loss drawer
can be opened)
Possible Helpline calls
“My XE-A101 has become locked out how do I reset it back to the initial
settings”.
settings”.
If the Machine becomes “Locked out” or you want to reset the XE-A101 to the initial
set-up follow this procedure: -
set-up follow this procedure: -
Reset to initial setting procedure: -
Unplug the Power from the mains outlet.
Remove the batteries.
Wait for 10 seconds.
Plug Power back into mains.
The machine should bleep 3 times, this indicates that the reset has been done.
Remove the batteries.
Wait for 10 seconds.
Plug Power back into mains.
The machine should bleep 3 times, this indicates that the reset has been done.
“Can the XE-A101 stamp the shop details on the paper roll”.
No, the ER-A101 does not have a Logo Stamp facility.
“Can the XE-A101 take 2 ply paper roll”.
No, the printer used will not print through to the second sheet.
“4 ---- appear on the display when going into Z/PGM position and will not allow
programming or reporting”.
programming or reporting”.
The 4 ---- appear because you have a secret code programmed into your machine, to
delete the secret code enter the following: -
1 Turn to Z/PGM position.
2 Enter
delete the secret code enter the following: -
1 Turn to Z/PGM position.
2 Enter
X/TM
0
0
0
0
TL/AT/NS
#/ST
Display