Sharp UP-800 (serv.man6) Handy Guide ▷ View online
•
After redeem entry receipt print shows the correct subtotal amount
Receipt sample
UP-800 added software features
•
1 line Bill print format at TM-T 88 printer
The behavior if amount and text overlaps depends on the setting of SRV#916-
A “Eat-In” or “2 line print”
The behavior if amount and text overlaps depends on the setting of SRV#916-
A “Eat-In” or “2 line print”
•
At training function SRV mode selection of Journal print / E-J and T-LOG
storage Yes / No
storage Yes / No
SRV #910-B
= E-J and T-LOG no storage “+1”
= Journal no print “+2”
= E-J / T-LOG no storage / Journal no print “+3”
= E-J / T-LOG no storage / Journal no print “+3”
At UP-820F / N in parallel Journal print and E-J data storage can be done
•
For Back Office analysis the employee number is written to T-LOG file
UP-800 added software features
•
Introduction of a “Scale timer” (0 – 99 sec.) to return to initial scale display
In PGM mode under “Terminal” setting / by “0” sec. selection only scale items
are send to scale
In PGM mode under “Terminal” setting / by “0” sec. selection only scale items
are send to scale
Initial scale display:
0.000
0.00
0.00
kg
EUR / kg EUR
Scale timer set to “0” sec (scale item data only are displayed):
Department- / PLU- Text
1.000
1.00
1.00
kg EUR / kg EUR
Scale timer set to other value than “0” sec (none-scale item data also displayed):
Department- / PLU- / EAN- / Function Text
1.00
kg EUR / kg EUR
UP-800 added software features
•
Re-introduction of the “Attempt Retry” pop-up window in case of KP
failure and KP spare printer definition
failure and KP spare printer definition
SRV#929-B
selection to use this pop-up window “Yes /No”
(+4/0).
Default value is set to “No”.
•
Free text qty “1x” print can be cut from receipt print in order
to allow reason code entry for “Return goods”
SRV#929-C selection if the “1x” qty is cut on receipt “Yes/No” (+2/0).
Default value is set to “No”.(UK specific request)
to allow reason code entry for “Return goods”
SRV#929-C selection if the “1x” qty is cut on receipt “Yes/No” (+2/0).
Default value is set to “No”.(UK specific request)
•
Registered EAN codes by the “Learning Function” are not stored
in the PLU / EAN file (UK specific request)
in the PLU / EAN file (UK specific request)
SRV#929-C
selection if storage in the PLU / EAN file is done “No/Yes”
(+4/0).
Default value is set to “Yes”.
•
Implementation of the “Electronic delivery note” function
UP-800 added software features
Click on the first or last page to see other UP-800 (serv.man6) service manuals if exist.