DOWNLOAD Sharp POS UTILITY (serv.man2) Service Manual ↓ Size: 1.94 MB | Pages: 42 in PDF or view online for FREE

12

•

This option is only applicable to the UP-3300.

•

Get ALL RAM data from the ECR.  Please note this data is NOT EDITABLE!

This option gets a complete memory image from the ECR.  This image is unique to
the Firmware (EPROM) Version installed in the ECR where the data was retreived
from.  Sending it to an ECR with a different version can cause the ECR to lock up.
All RAM data is used to create a register

identical to the source ECR including any sales.

•

This option is only applicable to the Starrtec Services TCP/IP Interface for 

ECR's.

•

This is a Communications Test to see if there is a va lid ECR connected to the
computer and if it is available for Comms.  This test is performed before EVERY
Comms Session.  If no SEND or RETRIEVE options are selected, the test will
be performed on its own.  During this test the Progress Bar will be displayed to
show the result.

•

Clicking this button will ask you to Select a Register (ECR) for this operation.

The Edit drop-down menu allows access to the same features as the buttons at the bottom
of the 

 main screen.  The Delete Data option is not available from here.

Access Help information from here.

13

This option allows copying various data files from one register to one or more of the same
type.

This is the ECR that will have its selected data duplicated.  If there is no data in the
database for this ECR,  the selection Checkbox will be greyed out.

14

If the checkboxes are greyed out, there is no data for this selection in the database
(hasn't been retrieved), or the selected register doesn't support the selection.  As
some data can be copied across models (Condiments and PLU Menus), the list of
Destination ECR's will change depending on the selections you make.

If there are any other ECR's in the database of the same type, then they will be
displayed here.  You can tick one or more of these.

Select ALL the displayed ECR's.

De-Select ALL the displayed ECR's.

Starts the copy operation.  Details of which ECR was copied to which is written to
the Log File.
.

Close the Copy Keyboard Data Form.

 ECR's which have SmartCard capability have a different file structure for the PLU

and Department Files.  If you wish to upgrade an ECR to become a SmartCard Type, then
use this option.

First RETRIEVE  all the data from the ECR.  If the ECR was a SharpSmart UP-3300 using
Version 1.0.1 Firmware or earlier, create it as a UP-3300 in Sharp-link before retrieving the
data.  Use this option to change its type.  In the process the AllRam and FDS Data will be
deleted from the 

Database and the ECR Type changed the SmartCard

equivelant number.  Then Upgrade the ECR, setup the file structure, 900 jobs etc.  When
this is completed, send the data from 

back to the ECR.

• The SmartCard equivelant type for the current ECR.

15

•

Make the Change

•

Will only display ECR's which are capable of being upgraded to SmartCard
operation.

•

The ECR to be converted.

•

Close the Change Type form.

This is where you configure the settings for On-Line Communications.  Each ECR has
separate settings in the database.

This form is used for a number of tasks; Sending, Retrieving and Exporting Data.  The
caption on the button shown as Get on the sample below, will change to reflect the
operation about to be performed on the selected ECR.

•

This is the Computer Port to use for ECR Communications.  Normally this would

be set to either 1 or 2, but Comm Ports up to COM16 are supported.  You will not
be allowed to select an invalid Comm Port.