Sharp ER-A570 (serv.man21) Service Manual / Technical Bulletin ▷ View online
CHANGE OF THE CUSTOMER
SPECIFICATION WITH EAN
SPECIFICATION WITH EAN
[Parts changes]
1. Model name:
ER-A61R1/A57R1
2. General:
This is to inform you of the change to the customer specification when using EAN.
3. Description:
The change is to allow the use of the customer specification and EAN function whilst using an
inline system and the overlapped clerk.
4. Action:
((For the field))
The following special service preset will be released against this phenomenon.
In case SSPERA610-005 or SSPERA570-005 reported in our Technical Bulletin A570-008 or
A610-008 is set, delete the SSP and input SSPERA610-006 or SSPERA570-006.
(As SSPERA610-006 and SSPERA570-006 have all the code of SSPERA610-005 and of
SSPERA570-005, deleting SSP 005 does not matter.)
Key sequence to delete SSPERA610-005 & SSPERA570-005
SRV MODE
993
•
X 5 TL
((For production))
Change will be made in the next scheduled EPROM release.
5. Remarks:
Attached data
1) SSP Setting Order
2) SSP ERA610-006
SSP ERA570-006
1/6
Destination
Model
SSP number
Applicable ROM version
For V
ER-A61R1
SSPERA610-006
RAN1A/RAN1B
ER-A57R1
SSPERA570-006
RAP1A/RAP1B
Date :
Model :
Ref :
Colour Code :
Page 1
1st November 1996
ERA570
A570-013
White
ELECTRONIC CASH REGISTER
TECHNICAL BULLETIN
Sharp Electronics (UK) Ltd, Technical Support Group
SSP SETTING ORDER
1) Input 959 X TL after turning to the PGM2 MODE, and then confirm the inputted SSP number.
(Refer to the printed example.)
2) When SSP-005 exists, delete it in the following sequence. (No inputting is needed in case it does not exists.)
After turning to the SRV MODE, input as follows.
993
→
•
→
X
→
5
→
TL
3) Turn to the SRV MODE and then input the SSP following the attached SSP Setting Data.
4) Check a printed receipt by comparing it with the set data.
5) In case an error or errors is/are found, whose SSP data should be corrected in the following sequence.
991
→
•
→
X
→
XXX
→
X
→
YYY
→
ST
→
TL
XXX: STEP number YYY: SSP data
6) Switch off and on by pulling out the AC plug and inserting it again.
(Printed example)
#0959
∗
PGM2
∗
RAI1A
RAN1A
RAN1A
SSP ERA610-005
ROM version number
Inputted SSP number
2/6
3/6
4/6
Display