DOWNLOAD Sharp ER-A470 Service Manual ↓ Size: 157.69 KB | Pages: 15 in PDF or view online for FREE

Model
ER-A470
Pages
15
Size
157.69 KB
Type
PDF
Document
Service Manual
Brand
Device
ECR / EURO Specification Service Manual
File
er-a470.pdf
Date

Sharp ER-A470 Service Manual ▷ View online

SERVICE MANUAL
CODE: 00ZEREUROSM/E
SERVICE MANUAL FOR EURO FUNCTION
MODEL
 ER-A440/A450
MODEL
 ER-A460/A470
MODEL
 ER-A490
MODEL
 ER-A550S
MODEL
 ER-A570/A610
SHARP CORPORATION
This document has been published to be used
for after sales service only.
The contents are subject to change without notice.
Parts marked with "
!
" is important for maintaining the safety of the set. Be sure to replace these parts with specified
ones for maintaining the safety and performance of the set.
CHAPTER 1.
ABOUT FOR EURO FUNCTION . . . . . . . . . . . . . . . . . .  1
CHAPTER 2.
EURO FUNCTION-COMPATIBLE ROM TABLE. . . . . .  6
CHAPTER 3.
ROM REPLACEMENT. . . . . . . . . . . . . . . . . . . . . . . . . .  8
CHAPTER 4.
PROGRAMMING FOR EURO FUNCTION . . . . . . . . . .  9
CONTENTS
CHAPTER 1. ABOUT FOR EURO
FUNCTION
In this section, it is described about common EURO functions of
ECR.
The DISPLAY/PRINT SAMPLE and PROGRAMMING JOB of each
models are described at the other section.
1. CURRENCY EXCHANGE (Exn) RATE
The CURRENCY EXCHANGE RATE is changed from "4inte-
ger+4decimal" to "3integer+6decimal".
[Programming]
(PGM mode)
Currency Exchange Rate programming
A440/
A450
A460/
A470
A490
A550S
A570/
A610
JOB#
1310
1310
1310
1310
1310
2.
New CG of EURO Symbol
EURO character code = 207
3. DOMESTIC CURRENCY SYMBOL
[Programming]
(SRV mode)
Domestic currency symbol programming
A440/
A450
A460/
A470
A490
A550S
A570/
A610
JOB#
986
915-A
915-A
915-A
915-A
4. FOREIGN (EX1) CURRENCY SYMBOL
EURO symbol character code is added into the Chatacter Code
Table.
EURO symbol is used to print the EURO amount.
ECR can use the EURO symbol character for the domestic cur-
rency symbol or exchange (EX1) currency symbol by below pro-
gramming jobs.
The selection of foreign currency symbol is supported only for EX1
(EURO) because the EURO is used at EX1 or Domestic currency.
(Notes)
About Remote Printers and Slip printers
(ER-01RP/02RP/03RP/04RP, EPSON TM-295/300/T85, INDATEC
SLIP etc...):
ECR cannot support to print EURO SYMBOL on Remote Printers
and Slip Printers. The EURO symbol is not printed on them be-
cause they do not have EURO symbol themselves now.
[Programming]
(PGM mode)
Currency symbol for EX1 key programming
A440/
A450
A460/
A470
A490
A550S
A570/
A610
JOB#
2334
2680-F
2680-F
2680-F
2680-F
5. FOREIGN CURRENCY DRAWER
[Programming]
(PGM mode)
Exchange drawer No. programming
A440/
A450
A460/
A470
A490
A550S
A570/
A610
JOB#
2680
2680-E
2680-E
2680-E
2680-E
6. FOREIGN CURRENCY DRAWER OPEN
function
This function is used to open the foreign currency drawer without any
sales entry.
Case of Opening FOREIGN CURRENCY DRAWER
(1) At the timing of issuing receipt after tendering foreign currency
amount.
(2) FOREIGN CURRENCY DRAWER OPEN function (THIS FUNC-
TION)
(3) At the timing of issuing XZ REPORT (included CCD)
[Purpose]
This function is used for opening the foreign currency drawer
when the change due of a transaction is given by foreign currency
just after a transaction.
[Operation]
Key entry sequence
---- EXn ----
[Entry conditions]
Operating modes that allow the entry: REG and MGR modes
(It is not allowed in the VOID mode).
This operation cannot be mixed with other entries such as sales
entry within a transaction, and it cannot be mixed with the non-add
code entry.
[Action]
This operation opens the foreign currency drawer.
This operation is executed only when the foreign currency drawer
is set.
This operation dose not have any counter and totalizer.
7. EX1 amount for TOTAL and CHANGE
This function is  selectable at  PGM mode (PRINT or NOT).
If "NOT" is selected, the total is printed as domestic currency.
(Current spec)
If "PRINT" is selected, TOTAL AMOUNT is printed both Domestic
amount and EX1 amount (which is  calculated by EX1 RATE).
But, EX1 amount is not printed when SUBTOTAL VOID is exe-
cuted.
[Programming]
(PGM mode)
Printing of EX1 amount for Total and Change
A440/
A450
A460/
A470
A490
A550S
A570/
A610
JOB#
2616-X9-D
2680-A
2680-A
2680-A
2680-A
– 1 –
8. EX1 amount for TOTAL and TENDERING
VP (NORMAL VP)
This function is available only for VP of the finalized function (TO-
TAL VP, MEDIA  VP) in Normal  VP.
It is not available for the VP (ITEM VP, RA/PO VP etc) except the
finalized function.
When the VP of the finalized function (TOTAL VP, MEDIA VP) is
executed, it is printed "TOTAL amount" and "EXCANGE1 amount"
which is converted from the total amount.
But, it does not print the EX1 amount at the VP (ITEM VP, RA/PO
VP etc) without the finalized function.
This function is selectable at PGM mode (PRINT or NOT).
If "NOT" is selected, the VP format is same as the current spec.
In case of "EX1 AMOUNT PRINT FOR TOTAL VP", Cashier/Clerk
code and TIME are not printed at VP.
ER-A490/A570/A610:
The CURRENCY DISCRIPTER is not printed on VP (because it
dose not have any space).
FRENCH CHECK, EURO CHECK, ENGLISH CHECK, GERMAN
CHECK:
This function is not available for FRENCH CHECK, EURO
CHECK, ENGLISH CHECK and GERMAN CHECK because they
do not have the printing space on their format.
They print the domestic amount only.
(It  means to keep the current specification.)
[Programming]
(PGM mode)
JOB#2680-B: Printing of EX1 amount for Total and Tendering VP
A440/
A450
A460/
A470
A490
A550S
A570/
A610
JOB#
2616-X9-E
2680-B
2680-B
2680-B
2680-B
9. FOREIGN CURRENCY (EXn) TAB
It is selectable the TAB position for each EXCHANGE.
The programmed TAB position is used to print and display the
exchange amount.
It is not referred when the exchange amount is calculated by the
exchange rate.
The exchange rate must be programmed as the rate for lowest
digit.
Ex)
(1) Domestic Currency TAB = 2 , Foreign Currency TAB = 0
In case of "Domestic Currency 1.00 is same as Foreign Cur-
rency 50", the exchange rate is 0.500000 (
 50 Foreign/100
Domestic).
(2) Domestic Currency TAB = 2, Foreign Currency TAB = 1
In case of "Domestic Currency 1.00 is same as Foreign Cur-
rency 50.0", the exchange rate is 5.000000 (
 500 For-
eign/100 Domestic).
[Programming]
(PGM mode)
JOB#2330 : TAB for EXCHANGE keys
10. CHECK, CREDIT operation for EX1
EX1 Calculation method selection
EX1 CHK+CR totalizer text
This function is available only when either EURO currency or LO-
CAL currency is assigned to EX1.
(It is available only while EURO status is (B) or (C).)
The tendered amount of CHECK, CREDIT for EX1 is calculated to
common totalizer (EXCHANGE1 CHECK+CREDIT  SALES).
The tendered amount of CHECK, CREDIT for EX1 is not sent to
EFT terminal because it is not clear to be supported the entry of
foreign currency (EURO) by EFT terminal.
If this function is used under the EURO status (B) [EX1 as EURO],
EX1 amount must be calculate by division for rate because it is
decided that EURO exchange rate must be "1EURO=xx.xxxxxx
LOCAL Currency".
[Operation]
(1) EX1 (All  models)
(2) EX2
4 (ER-A440/A450/A460/A470/A550S)
(3) EX2
9 (ER-A490/A570/A610/A650/A670)
XXXXXXX
AMOUNT IN
FOREIGN CURRENCY
TL
CHKn
EX1
CRn
FOR EXACT AMOUNT
PAYMENT
FOR ADDITIONAL PAYMENT BY FOREIGN CURRENCY
CL
Cancel:
Item operation or
tendering domestic
currency
Re-entry
Preset Rate
XXXXXXX
AMOUNT IN
FOREIGN CURRENCY
TL
EX2
EX3
XXX.XXXXXX
EX4
FOR EXACT AMOUNT
PAYMENT
FOR ADDITIONAL PAYMENT BY FOREIGN CURRENCY
CL
Cancel:
Item operation or
tendering domestic
currency
Re-entry
Preset Rate
XXXXXXX
AMOUNT IN
FOREIGN CURRENCY
TL
EX2
EX3
EX9
FOR EXACT AMOUNT
PAYMENT
FOR ADDITIONAL PAYMENT BY FOREIGN CURRENCY
CL
Cancel:
Item operation or
tendering domestic
currency
Re-entry
Preset Rate
– 2 –
[Programming]
(PGM mode)
CHECK, CREDIT operation for EX1
A440/
A450
A460/
A470
A490
A550S
A570/
A610
JOB#
2616-X9-C
2680-C
2680-C
2680-C
2680-C
EX1 Calculation method
A440/
A450
A460/
A470
A490
A550S
A570/
A610
JOB#
2616-X9-B
2680-D
2680-D
2680-D
2680-D
EX1 CHK+CR totalizer text
A440/
A450
A460/
A470
A490
A550S
A570/
A610
JOB#
2314
2314
2314
2314
2314
11. CHANGING EURO FUNCTION
(Changing EURO Function)
X1/Z1 mode:
X: 1 = EURO STATUS (B)
2 = EURO STATUS (C)
3 = EURO STATUS (D)
About EURO STATUS are shown the following pages.
It is executing automatically to change from status (A) to status (B),
(C), (D).
Selectable type is one of below 4 types.
And the selectable type is decided as below for each status.
CURRENT STATUS
Selectable STATUS
(A)
(B)
(C)
(D)
(A)
×
×
×
(B)
×
×
(C)
×
(D)
Marked "
×
" is selectable
<Action>
It is executed some of below JOBs which is needed for each status.
 1) Issue General Z1 report.
 2) Issue General Z2 report.
 3) Clear GT1/2/3.
  4) Change PGM function "EX1 AMOUNT PRINTING FOR TOTAL
AND CHANGE YES/NO".
  5) Change PGM function "EX1 AMOUNT PRINTING FOR TOTAL
VP YES/NO".
  6) Change PGM function "EX1 CALCULATTION METHOD  DIVI-
SION/MULTIPLICATION".
 7) Set "Domestic currency symbol" as  EURO  SYMBOL.
  8) Set "Domestic  TAB" as  "2".
  9) Set "EX1 currency symbol" as the suitable data.
10) Set "EX1 TAB" as the suitable data.
<Selecting type and its action>
Current status (A):
CURRENT STATUS
(A)
Selected STATUS
(B)
(C)
(D)
  1) General Z1 report
ISSUE
ISSUE
ISSUE
  2) General Z2 report
ISSUE
ISSUE
ISSUE
 3) GT1/2/3
CLEAR
CLAER
 4) EX1 AMOUNT
PRINTING FOR
TOTAL AND
CHANGE
"YES"
"YES"
"NO"
 5) EX1 AMOUNT
PRINTING FOR
TOTAL VP
"YES"
"YES"
"NO"
 6) EX1
CALCULATTION
METHOD
"DIVISION"
"MULTI."
"MULTI."
 7) Domestic
currency symbol
[EURO]
[EURO]
 8) Domestic TAB
"2"
"2"
 9) EX1 currency
symbol
[EURO]
The Current
"Domestic
currency
symbol"
10) EX1 TAB
"2"
The Current
"Domestic
TAB"
Marked "—" is remaining the current data.
Current status (B):
CURRENT STATUS
(B)
Selected STATUS
(C)
(D)
  1) General Z1 report
ISSUE
ISSUE
  2) General Z2 report
ISSUE
ISSUE
 3) GT1/2/3
CLEAR
CLAER
 4) EX1 AMOUNT
PRINTING FOR
TOTAL AND
CHANGE
"YES"
"NO"
 5) EX1 AMOUNT
PRINTING FOR
TOTAL VP
"YES"
"NO"
 6) EX1
CALCULATTION
METHOD
"MULTI."
"MULTI."
 7) Domestic
currency symbol
[EURO]
[EURO]
 8) Domestic TAB
"2"
"2"
 9) EX1 currency
symbol
The Current
"Domestic
currency
symbol"
[SPACE]
10) EX1 TAB
The Current
"Domestic
TAB"
Marked "—" is remaining the current data.
800
X
TL
– 3 –
Page of 15
Display

Sharp ER-A470 Service Manual ▷ Download

  • DOWNLOAD Sharp ER-A470 Service Manual ↓ Size: 157.69 KB | Pages: 15 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sharp ER-A470 in PDF for free, which will help you to disassemble, recover, fix and repair Sharp ER-A470 ECR. Information contained in Sharp ER-A470 Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.