Sharp ER-A450S (serv.man2) Handy Guide ▷ View online
Sharp ECR/EPoS Technical Specification
CCD Scanner connection to ER-A450S
CCD Scanner connection to ER-A450S
Page 1 of 1
January 2001
ER-A450S and CCD Scanner Connection
1. Power off the ER-A450S ECR.
2. Remove the top cabinet screws of the ER-A450S ECR.
3. Remove the top cabinet of the ER-A450S ECR.
4. Change the jumper settings as illustrated below.
(Please see page 1-4 Service Manual ER-A450S).
This supplies +5V to the CCD Scanner.
(Please see page 1-4 Service Manual ER-A450S).
This supplies +5V to the CCD Scanner.
5. Connect the CCD Scanner to Channel 8 as illustrated below.
(Please see page 1-4 Service Manual ER-A450S).
(Please see page 1-4 Service Manual ER-A450S).
6. PGM Program the following.
7. Your CCD Scanner should now be ready.
Display