Sharp ER-A410 / ER-A420 (serv.man15) Driver / Update ▷ View online
ERA410/420 Logo Utility
To use the GRAPHIC LOGO UTILITY on for the ER-A410/420 please follow these instructions.
Hardware requirements:
Computer
APLD Cable
ER-A410 or ER-A420
Software requirements:
Logo Utility Software.
PC Operation
Run the downloaded program taken from the Web.
Run the downloaded program taken from the Web.
After the Program has been installed you can run the Utility.
During communication status check you may cancel the communications, this will bring you
into the main LOGO DOWNLOADER screen.
You can now select Logo download or Communication settings (default settings are OK)
Logo Parameters
Size: 288 dots (w) x 130 dots (h)
Size: 288 dots (w) x 130 dots (h)
Color: black and white
Black Rate
-
-
Total black rate: 35% or lower
-
Local black rate: The black rate of a horizontal dot line is 55% or less.
ECR Operation
You will have to assign one of the RS Ports for On-line to do this select job code #2690
You will have to assign one of the RS Ports for On-line to do this select job code #2690
PGM Mode
2690 . x 1 x 1000 (to use the back port 1)
2690 . x 1 x 2000 (to use the front port 2)
Connect 9 pin APLD cable (see page 1-13)
Display