Sharp DX-AT50H (serv.man8) Service Manual / Specification ▷ View online
DX-AT50H
– 14 –
ADDITIONAL DESCRIPTION
Disassembling the top cabinet
1. Remove the 5 screws on the backside.
2. Raise the rear end by approx. 10 mm,
3. Slide it backward by approx. 5 mm and raise it to remove.
1. Remove the 5 screws on the backside.
2. Raise the rear end by approx. 10 mm,
3. Slide it backward by approx. 5 mm and raise it to remove.
Disassembling the bottom cabinet
• Notice that the bottom cabinet can be removed only when the top cabinet is removed.
• Notice that the bottom cabinet can be removed only when the top cabinet is removed.
1. Remove the 2 screws on the backside.
2. Remove the forward rubber cushions (2 cushions),
3. Remove the 2 screws underneath the removed 2 cushions.
4. Hold up the rear end by approx. 5 mm and slide it backward to remove.
2. Remove the forward rubber cushions (2 cushions),
3. Remove the 2 screws underneath the removed 2 cushions.
4. Hold up the rear end by approx. 5 mm and slide it backward to remove.
Display